Speedata TT35A User manual

TT35A Quick Guide V1.1 DATE：2014-08-08
TT35A
Quick Guide
Android 4.0.3

TT35A Quick Guide V1.1 DATE：2014-08-08
TT35A SPECIFICATION
PROCESSOR Texas Instruments AM3715 1GHz
STORAGE & MEMORY 512M FLASH, 512M SDRAM
OS Android 4.0.3
1. Bluetooth 2.1
2. WIFI 802.11b/g/n
3. GPRS/HSPA/EVDO
GPS MODULE Ublox The 6th Generation (option)
PC CONNECTOR USB 2.0 High-Speed
SCREEN SIZE 3.5-in VGA LCD
SCREEN RESOLUTION 480 × 640
TOUCH SCREEN TYPE Resistive touchscreen
BACK LIGHT TYPE Transflective screen, Back lighting, visible under sun
MEGAPIXELS 5MP
FOCUS Autofocus
SCAN DISTENCE 5cm～30cm
IDENTIFICATION RIGHTNESS
No light no less than 13Lx and can identify 0.3Lx
with fill light
NewLand: EM1300
NewLand: EM3000
Symbol: SE955
Symbol: SE4500
1. UHF RFID 900MHz
2. HF RFID 13.56MHz(ISO/IEC 14443A/B, 15693)
3. LF RFID（125K, 134.2K option）
Optical Fingerprint Identification
Semiconductor Fingerprint Identification
GSM/GPRS quad-band 850/1900/2100 MHz
CMDA dual-band 800/1900 MHz
WCDMA HSDPA+ Upstream: 14.4Mbps
Downstream: 5.76Mbps
CDMA EVDO Upstream: 3.1Mbps
Downstream: 1.8Mbps
SIZE 175mm × 77.5mm × 24.4mm
BATTERY 4500mAh 3.7V
Temperature Range: -20℃~ +50℃
Humidity Range: 5% ~ 95% (no condensation)
Within the scope of operation, 6 surface can
withstand the impact of falling to cement floor from
1.5 meters in height
Scroll Specification:
1000 times 0.5m 6 rolling contact surface
Seal Grade: IP65
RFID MODULE
EXPANSIBILITY
COMMUNICATION
PHYSICAL:
SCREEN
WORK ENVIRONMENT
BASIC INFOMATION
CONNECTIVITY
BARCODE MODULE
CAMERA
EXPANSIBILITY
COMMUNICATION MODULE
COMMUNICATION ABILITY

TT35A Quick Guide V1.1 DATE：2014-08-08
1. EXTERNAL STRUCTURE DESCRIPTION

TT35A Quick Guide V1.1 DATE：2014-08-08
2. HOME SCREEN
Home screen shows some important informations such as missed calls
and messages. Touch the shortcut menu to make a call, take photos,
check messages and so on directly.

TT35A Quick Guide V1.1 DATE：2014-08-08
2.1 Notification Bar Icons

TT35A Quick Guide V1.1 DATE：2014-08-08
3. OPERATION INSTRUCTIONS
3.1 Dialing
Click the Phone at Home Screen into dial interface. The following
figure:

TT35A Quick Guide V1.1 DATE：2014-08-08
3.2 Notification Bar Drop-do w n Menu
Click the Notification Bar downward-sloping, open the following
interface:

TT35A Quick Guide V1.1 DATE：2014-08-08
3.3 Main Menu
Click Menu in Home Screen, you’ll see the picture below:
All apps are list here, click the icon to start the application. If there are too
many icons can’t display on this screen, please slide finger to the left to
show more icons. Click or slide to the widget, long press parts to add to
the desktop.

TT35A Quick Guide V1.1 DATE：2014-08-08
3.4 Settings Menu
Click Settings at Main menu, as shown in fig:
All the settings about the phone are list here, such as Wi-Fi, Language &
input and Apps. Slide up & down to see more settings.

TT35A Quick Guide V1.1 DATE：2014-08-08
3.5 File Transfer Instructions
Ensure that the TF card installed well and the USB cable is connected to
PC well. Drag down the Notification Bar and click the USB connected,
turn to next picture, click Turn on USB storage. When successful, the
robot will change to orange. Now the pc will notice you a removable
storage device is connected, you can use it just like a u-disk.

TT35A Quick Guide V1.1 DATE：2014-08-08
3.6 Wi-Fi
The device is in wireless network environment and can use it. Go into
Settings, turn Wi-Fi ON below WIRELESS & NETWORKS. Then it will list
the networks available. Choose the hotspot you want to connect directly,
input password. If it is a network hidden SSID, please click
ADD NETWORK, input SSID and select the security type.

TT35A Quick Guide V1.1 DATE：2014-08-08
3.7 Focus Scanning
When cursor is in a input status, the device can scan barcode and input
the result to where cursor in by press SCAN KEY. Before implement it,
you should do a setting. Go into Settings Accessibility, and check
Enable Keyreport Scan just like the pictures below. Then you can use
Focus Scanning.
Note:
1. You should designated the position of cursor before use Focus
Scanning, or you won’t see the messages about barcode.

TT35A Quick Guide V1.1 DATE：2014-08-08
2. The Add Keyvalue under Enable Keyreport Scan is an option for
Focus Scanning. You can choose one to add nothing, an table or
an enter after the bacode messages.
3. Be sure of the Enable Keyreport Scan do not checked when using
Barcode scan Demo we provided. You can’t use Demo and Focus
Scanning at the same time.
3.8 About TF Card
The device has two TF card slot. Located above a SIM card slot on the left
side of the /mnt/sdcard2 card slot is not the default of the mount , but
you can visit. And the other /mnt/sdcard is mounted by default. Data
on the drive can be 1,4,8. Hardware can connect up to 8 bits, we had four
links.

TT35A Quick Guide V1.1 DATE：2014-08-08
3.9 RFID(optional)
If the phone has RFID module，open RC663_RFID application. Place a
Mifare One card to the reader range, input a number of sector and click
DEMO. The screen will display the informations after read and write this
sector.
When develop application related RFID, we’ll provide you the DEMO
and documentations.

TT35A Quick Guide V1.1 DATE：2014-08-08
4. SPECIAL CUSTOMIZATION INSTRUCTIONS
This phone has many reserved port to meet the customization. It can
connect with RS232, I2C, RS485 and other interface’s peripherals or
some function modules. Please contact the phone manufacturer to get
more information.
5. NORMAL MODEL
Num
Model Specification
1
TT35A-S
TT35A Standard
Standard configuration:BT/GPS/GPRS/WIFI/4500mA
battery/3.5”LCD/WCDMA/charger/cable/Industrial
packaging
2
TT35A-NL
1D Infrared barcode scanner
Standard + Newland EM1300
Support Code128, EAN-13, EAN-8, Code39, UPC-A,
UPC-E, Codabar, Interleaved 2 of 5, ISBN/ISSN,
Code 93
3
TT35A-NL2D
1D&2D barcode scanner
Standard + Newland EM3000
1D&2D barcode scanner /Hardware decoding
4
TT35A-SY
1D laser scanning Standard + Symbol SE955
5
TT35A-R60
RFID Standard + HF RFID module 13.56MHz 14443/15693
6
TT35A-D6 Standard + U BLOX GPS moudle
7
TT35A-N43
1D Laser scanning Standard + Honeywell N4313
8
TT35A-SE45SR
Symbol SE4500SR scanner
Standard + Symbol SE4500SR

TT35A Quick Guide V1.1 DATE：2014-08-08
6. SPECIAL MODEL(optional)
6.1 TT35A can use UHF RFID or LF RFID module
UHF RFID
or
LF RFID
Read area
6.1.1 UHF Device Instroduction
The UHF module’s freq is 900Mhz，the device with UHF module will add
a “-UHF”after the normal name, such as “TT35A-NL-UHF”.

TT35A Quick Guide V1.1 DATE：2014-08-08
6.1.2 UHF Demo
The device has UHF module, then choose As3992demo in menu, and
enter ISO18000-6C, as shown in fig:
First click SEARCH key, a dialog will popup. Click Start key to begin to
search card. When a card is in the valid range, it’s EPC will list in the
screen. Click Stop key and click the EPC directly to select the card. When
success, it will go back to main window, and display the EPC in status bar.
Now you can operation the card(read/write/lock).
More informations about this demo and develop code please contact the
phone manufacturer to acquire.

TT35A Quick Guide V1.1 DATE：2014-08-08
6.1.3 LF Device Instroduction
TT35A has two types of LF RFID modules. One’s freq is 134.2KHz(LF1)
and the other is 125KHz(LF2). The device with LF RFID module will named
with a “-LF*”, such as “TT35A-NL-LF2”.
6.1.4 LF Demo
The device has LF module, then choose LFRFID in menu to enter demo,
as shown in fig.Click OFF, if it turn to ON and the green bar light on. Now
the demo is available. Place a card near the RFID read area, the card’s
content will display on the screen.
More information about this demo and develop code please contact the
phone manufacturer to acquire.

TT35A Quick Guide V1.1 DATE：2014-08-08
6.2 TT35A Embedded Printer
MT35A can attach a embedded printer, see the picture below. It Can print
text and barcode. Page width is 5.5cm .
Note: The device with printer need use two-cell battery motherboard
with 7.4V battery.

TT35A Quick Guide V1.1 DATE：2014-08-08
7. CUSTOMER SERVICE AND TECHNICAL SUPPORTER
Customer sevice 010 - 82346858
Technical supporter Skype: Android.Speedata
QQ: 1736897508