SpinetiX iBX410 Installation and user guide

spinetix.com
HOW TO
Set up your iBX410
C. CONNECT TO POWER
The player is powered by its power delivery unit.
Connect the lockable power connector attached to the PSU to the
power port (marked with the DC symbol).
Press the player power button.
Connect the detachable cable to the PSU, then plug it into a power
outlet.
Switch on the screen.
STEP 1:
STEP 3:
STEP 2:
STEP 4:
To connect your player to the network, you need an Ethernet cable
(not included).
Connect one end of the Ethernet cable to the Ethernet port
of your player.
Connect the other end of the Ethernet cable to the network.
STEP 1:
STEP 2:
B. CONNECT YOUR PLAYER TO THE NETWORK
The iBX410 supports HDMI 2.0. This means that you can connect
your player to any display that has an HDMI slot.
Connect via HDMI
To connect the player to your screen via HDMI, you need a display
with an HDMI connector and an HDMI cable (not included).
STEP 1:
Connect one end of the video cable to the HDMI port of your player.
Connect the other end of the HDMI cable to the HDMI port of the
display.
STEP 2:
A. CONNECT YOUR PLAYER TO THE SCREEN
This document is designed to get you started with the iBX410 digital signage player. For more detailed
information, please refer to this SpinetiX wiki page: Get started with the iBX410 player

spinetix.com
HOW TO
Set up your iBX410
D. SET UP YOUR PLAYER IN SPINETIX ARYA
The live chat within SpinetiX ARYA’s platform and on the SpinetiX Support Wiki is available
to you almost around the clock if you need further assistance.
Wait for the player to reboot.
STEP 4: Name your player.
STEP 5: Choose the screen orientation.
STEP 6: Choose your time zone.STEP 3: Enter the serial number of your player.
STEP 1: Go to «Players».
STEP 2: Click on «NEW».
https://support.spinetix.com/wikiLive chat
You can now start using your iBX410 player with SpinetiX ARYA.
Go to arya.spinetix.cloud/setup and create your SpinetiX ARYA account or sign in if you already have one.