Splash Lab TSL-974 Maintenance and service guide

TSL-974
coat hook
installation + maintenance

3Box Contents
3Technical Data
4Before You Install
5How to Install
6Cleaning
7Warranty
Back Cover Contact Details
contents
2TSL-974 COAT HOOK MANUAL

TSL-974 COAT HOOK MANUAL 3
box contents
ACoat Hook
BFixing screw
A
B
Finishes CS (Brushed satin stainless steel)
CP (Brushed copper finish)
BK (Brushed black finish)
BZ (Brushed bronze finish)
BR (Brushed brass finish)
Weight 5oz
Stainless steel 304AISI
Warranty 2 years from date of purchase
technical data

4TSL-974 COAT HOOK MANUAL
Location
The coat hook is to be fixed to a firm wall surface, with fixings appropriate to the wall
substrate.
before you install
SIDE
FRONT
2-3/16"
11/16"
Ø
1/2"
REAR
M5 x 0.8 Thread
SIDE
FRONT
2-3/16"
11/16"
Ø
1/2"
REAR
M5
x 0.8 Thread
FRONT
SIDE
FIXING
SIDE
FRONT
2-3/16"
11/16"
Ø
1/2"
REAR
M5 x 0.8 Thread

TSL-974 COAT HOOK MANUAL 5
how to install
1
Mark the proposed position of the hook
on the wall.
2
Drill the wall, taking care not to drill
through the panel, especially when
fitting to toilet cubicle partitions.
3
Screw the machine-screw end of the
wood-metal dowel into the body of the
hook.
4
Screw the assembled coat hook into
the previously drilled hole in the wall or
panel

6TSL-974 COAT HOOK MANUAL
cleaning
All grades of stainless steel will stain or discolour if due care and attention is not taken.
The surface must be regularly cleaned to ensure a long service life of the bin.
Use a soft cloth or sponge with a mild solution of soapy water as part of the regular
washroom janitorial routine. Do not use abrasive or cream cleaners as these will
damage the surface finish.
If the hook is subjected to a highly chlorinated environment eg swimming pools or
marine coastal locations, a further treatment, in addition to the regular cleaning as
described above, is recommended by the application of a household cleaning product
containing silicone.
If further information is required, contact The Splash Lab technical team for more
detailed stainless steel care guidelines.

We believe the future is personal. With a global mindset, we challenge conventional
restroom norms via product innovation to create considered washroom solutions
for corporate and educational spaces. We use rich raw materials, cutting-edge
automation and considered washroom design to powerfully and positively influence
the lives of people. We are The Splash Lab.
Demonstrating our commitment to quality and our belief in the strength of our
designs, we can offer the following warranties.
The Splash Lab will warrant that its products will be free of manufacturing and material
defects during normal use and environmental conditions as detailed below:
Coat hook 2 years’ parts & labour
If a defect is found in normal use, The Splash Lab. will, at their discretion, repair,
provide a replacement part or product, or make appropriate adjustments. Damage
caused by accident, misuse, or abuse is not covered by this warranty. Improper care
and cleaning will void the warranty.
Non-operation of the product due to environmental conditions beyond our control,
installation error, incorrect maintenance, water quality, fair wear and tear, incorrect or
inappropriate installation, misuse and abuse is not covered by the warranty.
Proof of purchase (original sales receipt) must be provided to The Splash Lab with all
warranty claims.
The above warranty is valid for goods supplied within North America.
For goods supplied outside of North America, The Splash Lab will honour the above
stated warranty periods for the parts only.
THE SPLASH LAB DISCLAIM ANY LIABILITY FOR SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES.
warranty
TSL-974 COAT HOOK MANUAL 7

TSL-974  US  REV 1-08/06/18
contact
General information
[email protected]
[phone]
Technical support
[email protected]
For further contact information visit:
www.thesplashlab.com