spo-comm spo-book EXPANDED Q170 User manual

Quick guide spo-book EXPANDED Q170
Please check before you start the device:
• If the device temperature conforms to the recommended operating temperature.
• If the po er source is correctly connected.
• If all adaptors and connectors are properly connected.
1. Front Panel:
2. Rear Panel:
1. USB 2.0 Ports
2. HDD LED
3. Po er Button
4. RS-232 Serial Port
5. Display Port
6. HDMI Port
7. VGA-Port
8. RJ45-GbE-LAN
9. USB 3.0 Port
10. Audio Out
11. Microphone In
12. PCIe
13. po er connector

3. Dimensionin :
4. BIOS:
Po er on the computer and the system ill start POST (Po er On Self Test) process. When
the message belo appears on the screen, press „DEL“ to enter Setup.
To save the BIOS settings press „F10“.
Short description of some BIOS settin s:
4.1. Wake On RTC: That allo a computer to ' ake up' after shut do n to execute tasks
every day or on a certain day . Advanced -> ACPI Confi uration -> RTC Alarm Power On
4.2. Restore on AC Power Loss: Please contact our Service Team.
4.3. pxe-Boot: boot an OS via LAN and DHCP. -> Boot -> Launch PXE OpRom Policy
5. Drivers:
The drivers for the spo-book EXPANDED Q170 can be found in our product catalog on the
product page under the tab "Product Details and Do nloads" and on the supplied driver
stick.
direct link: http:// .spo-comm.de/products/en/mini-pcs/expanded-q170.html