P.14
TOP TIPS BEFORE YOU START
1.Please check that all parts are present before you start the
assembly of your unit, as once assembled, the unit is exempt
from our home approval policy.
2.For ease and speed of assembly,we recommend that before
you commmence each step of assembly,you should identify
all the parts required for that step.
3.For larger items,please ensure that you have sucient space
and people(as indicated on page 1) to assemble your product
safely.
4.During assembly please take care not to over -tighten any
ttings,as this may damage the product.
5.Please retain these instructions for future reference .
WARNINGS
• This slide is for domesic Family use only and intended for
outdoor use.
• Warning! Choking hazard - This item is not suitable for children
under 3 years due to small parts.
• This slide is intended for children 3-8 years and not exceeding
45KG in weight.
• Slide is to be used by only one child at a time.
• For use under adult supervision
• Do not orientate the slide towerds the sun, this may lead to a
child becoming dizzy/disorientated through extended use.
• Don not allow children to climb on the slide bars of the slide
as this could lead to injury.
• This slide is designed for a child to slide down in a seated
upright position. Do not encourage children to go down lying
at on their fronts or backs as this may lead to injury.
• The slide is to be assembled/used on a at surface; use on
concrete, asphalt or other hard surfaces is not recommended.
• The slide is to be situated at least with a 2m clearance away
from fences, walls, out buildings, over hanging branches,
laundry lines ect.
• Do not allow children to wander in front of the slide chute
during use as this may result in injury.
• Packaging materials are not toys. Please remove all packaging
and packing materials before letting children use this slide.
ASSEMBLY
Adult assembly required. Warning! Choking hazard - This item is
not suitable for children under 3 years due to small parts. Care
should be taken to ensure small children do not have access to
parts when assembling. Please follow instruction for assembly
given and keep for future reference. Failure to assemble and
maintain this item as instructed may result in injury.
It is recommended to leave all ttings nger tight until
assembly is complete, for ease of construction,and then tighten
rmly.
Once assembly is complete , carefully check the slide before
use. If you nd any problems, do not allow children to use the
slide until it is t for use.
Please keep this assembly information and assembly
instructions for future use.
TIGHTENING NUTS & BOLTS
Do not over-tighten the nuts and bolts when you are
assembling this equipment, This is allow for some
possible adjustments and ease of installation.
Once you have nished the assembly of the
equipment, go back over all of the nuts and bolts and
properly tighten all of them before using the
equipment.
Regularly check this slide for signs of damage or wear. If
any damage is visible do not use until this has been
rectied.
Maintenance must be carried out by a responsible
adult.
Check all nuts and bolts twice monthly during the
usage season for tightness and tighten as required. It is
particularly important that the procedure be followed
at the beginning of each season.
Never use pliers to tighten up screws - these can cause
damage to paintwork increasing a risk of rust damage.
Tighten all nuts and bolts securely. Replace as needed.
If not checked regularly, bolts can be loose or missed
and components can become detached causing injury.
Check the slide at the beginning of the usage season
and monthly thereafter for evidence of
damage/deterioration. Immediately remove and
replace any items that appear weak or broken.
Check all covers designed for bolts and sharp edges
regularly to be certain they are present and in good
condition. Replace as needed. It is particularly
important that all covers are checked prior to the rst
use in each season.
Inspect metal parts and hardware for proper closure
and for signs of wear, deterioration and rust damage.
Replace as needed.
Lubricate all metal and moving parts regularly.
Remove plastic slide section and store indoors during
periods of inclement weather and when temperature
drops below 32 degrees Fahrenheit/0 degrees Celsius.
It is important to check and maintain the main parts at
regular intervals. If these checks are not carried out, the
slide could overturn or pose an injury hazard.
Make sure that you have all parts listed. If you are
missing any parts, please telephone
(+44) 01702 208182 to obtain any parts.