SPORTSPOWER SW-001 User manual

SINGLE SWING
!
WARNINGS!
- Misuse and abuse of this product can result in injury.
- Read instructions before assembly or using this product. Retain Instructions.
- Always inspect product before use, checking for worn, defective or missing parts.
- Suitable for age 3-8yrs. Max user weight 45 kg.
- Do not stand on the swing.
- Assembly by adults.
- Adult supervision at all times.
- Only for outdoor and domestic use.
- Before you start assembly please check all parts are included, if any parts are missing or
you need advice, please call Customer Help Line: ([phone].
SW-001
Tips : It will take 2 people around 30 mins to assemble this product.
USER AND ASSEMBLY MANUAL

P. 1
Before you start...
• We suggest you spend some time reading this guide before follow-
ing the simple step-by-step assembly instructions.
• Do not discard any of the packaging until you have checked that
you have all parts and fittings listed. When discarding packaging
take care and consideration for others and the environment.
• When assembling this product be aware of the safety of yourself
and others.
• Because of the size of this product we suggest that you assemble
it in the area intended for use.
• Some of the assembly will be easier with two people. Seek assis-
tance when lifting large or heavy items.
• Assemble this product on a clean, flat and level surface e.g. the
cardboard packaging.
• Keep any tools provided or spare fittings for future use. Only use
the tools specified.
• Assemble all parts loosely, by hand, before tightening any bolts or
fixings.
PLEASE CALL
BEFORE STARTING ASSEMBLY PLEASE CHECK ALL PARTS ARE
INCLUDED, IF ANY PARTS ARE MISSING,
([phone].

P. 2
SWING SEAT
(6)
LOWER LEG
CROSS BAR
RIGHT TOP LEG
(4)
(3)
NO. QTY
(1) TOP BAR 1
1
(2) LEFT TOP LEG 2
2
2(5)
(7) ANCHOR 4
4
PART LIST
(8) PLASTIC CAP 4
7
7
7
7
4
5
32
3
2
1
6
8
88
8
4
4
5
4

P. 3
1cm
2cm
3cm
4cm
5cm
6cm
7cm
8cm
9cm
10cm
0cm
C
"U" BOLT
M8×102mm
X2
BOLT
M6×42mm
X4
BOLT
M6×50mm
X4
BA

P. 4
E
X16
x
D
X8
1cm
2cm
3cm
4cm
5cm
6cm
7cm
8cm
9cm
10cm
0cm
G
X4
H
X8
I
M8
X4
J
M6
X8
ARC WASHER FLAT WASHER SPRING WASHER SPRING WASHER NUT NUT

P. 5
1cm
2cm
3cm
4cm
5cm
6cm
7cm
8cm
9cm
10cm
0cm
X1 X1
SPANNER
W Z
ALLEN KEY

step 1 NOTE: ENSURE YOU ATTACH THE SEAT CONNECTOR TO
THE U BOLT.
P. 6
1
2
3
D
G
I
A
D
X 2
1
2
6
2
3
3
G
A D I
x4x4 x8 x2

step 2
P. 7
1
2
4
4
4
4
5
5
6
2
3
3
4
8
5HJ
E
B
E
X 4
H
B E J
x4x4 x8 x4
#1 PLEASE INSERT LOWER LEG (4) BEFORE ATTACHING
CROSS BAR (5) FIRST.
#2 THEN INSERT THE PLASTIC CAP (8) INTO CROSS BAR (5).
#3 THE CROSS BAR (5) NEED TO BE ATTACHED TO THE
OUTSIDE OF THE SWING FRAME.

step 3
P. 8
H
C E J
x4x4 x8 x4
4
7
7
7
7
4 4
J
E
C
EH
4
7
X 4

step 4
P. 9
6-8CM
x4
7
Anchor the swing in the ground.