spovan HR03 User manual

心电心率带
产品使用说明书
本设备是一款集运动心率采集和连续心电图监控的
多功能心率带产品。
APP下载 & 安装及佩戴
Smate APP说明
开机 & 关机
指示灯说明
APP下载：可扫描以下二维码下载APP或在手机应用宝
搜索"Smate"并下载安装APP。
安装及佩戴：将设备主体紧扣在心率带上（指示灯方向
朝上），调节心率带松紧，佩戴在胸前。
开机：摇一摇设备自动开机，指示灯亮；
关机：运动量过低，或者持续1分钟检测到没有佩戴，
自动关机。
1. 开机后，进入APP，点“点击连接“，选择设备型
号HR03连接设备。
2. 连接设备后，自动监测心率，监测到心率异常时震
动提醒（震动1秒，间隔2秒，2组）。
3. 点击右上角 图标，进入连续心电图自动检测。每
隔5分钟会记录一次心电图波形以及分析数据，在主
界面 ECG模块里可以查询。
4. 在运动界面，可开启GPS户外运动，可记录：里程/
配速/平均速度/卡路里，并全程显示心率。
5. 设备检测到的运动步数会上传到APP，并记录步数、
距离和卡路里。
6. 主界面“设置”子栏目下，可进行：密码重置/固件
更新/清除数据/复位。
支持第三方APP：
开机佩戴好心率带后，心率数据持续进行蓝牙广播，
用户可选择第三方运动APP添加心率设备，选择我们
设备后。心率数据会上传到此APP。
说明：必须是开源支持标准蓝牙心率设备的第三方APP
才可以。
蓝灯长亮或闪烁：蓝牙广播状态，等待连接；
绿灯长亮或闪烁：AP P已连接；
红灯闪烁：低电，需充电；
红灯常亮：充电中；
灯不亮：充电完成或关机状态；

HRM & ECG
USER Manual
This device is a multi-functional heart rate belt
integrating exercise heart rate monitoring and
continuous ECG monitoring.
APPdownload & Installation and wearing
Smate APP description
Turn ON/OFF
Indicator light description
1. APP download: Scan the below QR code or search
“Smate” on Google Play or Iphone store.
2. Buckle the device on the heart rate belt (the indicator
light is facing upwards), adjust the heart rate belt to
a proper tightness, and wear it on the chest.
Turn ON: Shake the device to turn on automatically;
Turn OFF: If the amount of exercise is too low, or if it is
not worn for 1 minute, it will automatically shut down.
1. After turn on the device, enter the APP, click "click
to link", select the device model HR03 to connect to
the device.
2. After connecting the device, the heart rate is
automatically monitored, and the abnormal heart
rate is detected as a vibration reminder. (Vibrate
for 1 second, 2 seconds apart, 2 groups)
3. Click the icon in the upper right corner , enter the
continuous ECG automatic detection. The ECG
waveform and analysis data will be recorded every
5 minutes, which can be queried in the ECG module
of the main interface.
4. Tap the bar to exercise, you can turn on GPS
outdoor sports, and can record: mileage/pace/
average speed/calories, and display heart rate
throughout.
5. The number of exercise steps detected by the
device will be uploaded to the APP, and the number
of steps, distance and calories will be recorded.
6. Under the "Settings" sub-menu of the main
interface, you can perform: password reset/
firmware update/clear data/reset.
Support third-party APP:
After powering on and wearing the heart rate belt,
the heart rate data will continuously to be broadcast
via Bluetooth, and the user can choose a third-party
sports APP.
After adding a heart rate device, select our device.
Heart rate data will be uploaded to the secondary
APP.
(Note: It must be an open source third-party APP that
supports standard Bluetooth heart rate devices.)
Blue light on or flashing:
Bluetooth broadcast status;
Green light on or flashing: Connect APP;
Red light flashing: Low battery;
Red light on: Charging;
Light off: Charging complete/shut down;