i-gatU Q-60 User manual

Q-60
Q-Band
EN
User Manual
Device Overview
Wristband Button Core
Metallic contact for charging
Clasp
How to wear your Q-Band?
1 Wear Q-Band on your wrist 2 Fasten Q-Band with clasp
Put on the wristband with the screen facing up and the band
wrapped around your wrist. Align the clasp along the band to
find the holes where best fit the clasps.
queeze both clasps into the holes on the wristband until you
hear a click, indicating the band is securely fastened.
3 Charge your Q-Band 4 Change the wristband
1
2
To charge your Q-Band, plug the charging cable into a U B port
and attach the other end to the back of the Q-Band. A battery
icon will appear on the screen displaying the charging progress.
It takes around two hours to fully charge the battery.
1. pread open both bands with the screen facing up, and press down
the screen with your thumb until the core comes off the wristband.
Remove the clasp from the wristband as well.
2. Insert the core with screen facing down into the notch from the
inner side of wristband. Button up the clasp on the side of the band
with 2 holes. Please be noted that the charging contact should be
near to the clasp.

Q-60 Q-Band
User Manual
Get started with Q-Band
1 Download and Install i-gotU Life app 2 et up Q-Band
Please download i-gotU Life app from Google Play and have it
installed on your Android mobile phone:
https://play.google.com/store/apps/details?id=com.mobileaction.ilife
Supported device
Any Android mobile phone (v4.3 and up versions) with
built-in 4.0 built-in Bluetooth connectivity.
The updated list of mobile phones compatible with this
sensor is posted at the following link:
http://ww2.voiis.com/qband/devices.html
Your Q-Band can be configured directly on the i-gotU Life app.
First ti e setup:
1. Open the i-gotU Life app.
2. A etup Wizard will be launched automatically.
3. Follow the on-screen instructions to proceed with more settings.
Set up a new device fro Settings:
1. Open the i-gotU Life app.
2. Tap the app icon at the upper left corner to open function menu.
3. Choose ettings.
4. Tap etup New Device under MORE DEVICE ETTING .
5. Follow the on-screen instructions to continue.
Note
Your personal information is used to calculate your Base Metabolic
Rate (BMR), which determines your calories burned.
3 tart Using Q-Band 4 Features of Q-Band & i-gotU Life App
1. Switch between different function odes
1. Long-press the button on the Q-Band until you see 4 icons
on the screen for mode selection.
2. Press the button to switch mode.
3. You’ll be entering the selected mode in 3 seconds.
2. Change display infor ation
Information shown on the screen will vary as you press the button on
the Q-Band to toggle between screen.
3. Q-Band odes
Daily ode: Analyzes your daily data, including steps taken
and calories burned, and displays current UV index.
Sleep ode: Tracks your sleep pattern and quality.
Sports ode: tarts a workout and displays information
including duration, steps taken, calories burned, UV-index and
distance traveled during the workout.
Nap ode: Awakes you via vibration after a short nap.
Silent Alar
ilent Alarm awakes you using gentle vibrations of the Q-Band.
You can dismiss the alarm by long-pressing the button on the
Q-Band. In case you miss the alarm, Q-Band will alert you again
in 5 minutes. Alarms can be set up from: i-gotU Life App Menu ->
ilent Alarm.
Notification
You will be notified with incoming calls, M , E-Mail, or alerts fr om
the social apps via vibration. When notified about an incoming call,
you may reject the call by long-pressing the button on Q-Band.
Notification can be set up from: i-gotU Life App Menu
-> Notification.
Re ote Display
1. Please download i-gotU ports app from Google Play
and have it installed on your Android mobile phone:
https://play.google.com/store/apps/details?id=com.mobileaction.isports
2.
After starting an activity on i-gotU ports app, selected sports
data from i-gotU ports app will be displayed on Q-Band.
3. Remote Display can be set up from: i-gotU Life App Menu
->Remote Display.
4.
The screen can be rotated by changing the settings from: i-gotU
Life App Menu -> ettings -> MORE DEVICE ETTING -> creen
Rotation.
Online Help
http://ww2.voiis.com/igotu-life/help.html
I portant Notice
1. Please do not use under water.
2. Please do not use any corrosive chemical to clean the
device.
WEEE
Note on environ ental protection:
After the implementation of the European Directive 2002/96/EU in the
national legal system, the following applies:
Electrical and electronic devices may not be disposed of with domestic W aste.
Consumers are obliged by law to return electrical and electronic devices at
the end of their service lives to the public collecting points set up for this
purpose or point of sale. Details to this are defined by the national law of the
respective country. This symbol on the product, the instruction manual or the
package indicates that a product is subject to these regulations. By recycling,
reusing the materials or other forms of utilizing old devices, you are making
an important contribution to protecting our environment.

Q-60
Q-Band
User Manual
Federal Communications Commission (FCC) tatement
15.21
You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s
authority to operate the equipment.
15.105(b)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1) this device may not cause harmful interference and
2) this device must accept any interference received, including interference that may cause undesired operation of the device.
FCC RF Radiation Exposure tatement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the
specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
Operating temperature -10° to 65°C (14° to 149°F)
Charging temperature 0° to 45°C (32° to 113°F)
Power input type DC 5V U B cable
Battery type Rechargeable Li-Poly, 3.7 Vdc
Input Maximum DC 5V, 0.1A