Spyclops SPY-BULLETG User manual

Weatherproof
IR
Color
Camera
Notes:
Before
providing
power
for
the
camera, please read
this
User
Guide
in
detail!

• BRIEF OF PRODUCT
* Sensor (CCD)
Adopt SONY 1/3" CCD Sensor.
* Auto Gain Control (AGC)
Built-in auto gain control (AGC) circuit. The color camera
can get high definition picture in low Lux condit i on.
* Scanning Mode
NTSC or PAL mode .
* Water Resistance
I P66
* Support UTC function
With UTC Remote Controller for the convenience of OSD menu
setting.
* OSD SETTING
MANUAL
LENS
TYPE : DCNIDEO
AUTO
MODE : CLOSE / AUTO / OPEN SPEED:0-255
HIGH LUMINANCE MODE : SHUT+AUTO IRIS / AUTO
IRIS
BRIGHTNESS : 0-255
AUTO
LOW LUMINANCE MODE : OFF / AGC
SHUTTER /
BRIGHTNESS : x0 . 25 , x 0.5, x 0.75 , x1
AGC
MODE : SHUT +AGC
SHUTTER: 1/ 50 ,1/ 120 ,1/ 250 ,1/ 500 ,1/ 1000 ,1/ 2000 ,
MANUAL
1/ 4000.1 / 10000
AGC :6, 12 , 18,24 , 30,36,42,44 .8
ATW
SPEED / DELAY CNT / ATW FRAME / ENVIRONMENT
WHITE BAL
PUSH / ANTI CRIPUSH LOCK/USER1 / USER2 / MANUL
BACK LIGHT OFF / BLC / HLC
PICT AD -
MORROR / BRIGHTNESS / CONTRAST / SHARPNESS / HUE / GAIN
JUST
OFF
OSDS ET
A TR
ON
LUMINANCE / CONTRAST
MOTION
OFF
DET
ON
DETECT SENCE / BLOCK DISP / MONITOR AREN
AREA SEL /T OP / BOTTOMILEFT / RIGHT
OFF
PRI V ACY
AREA SEL/TOP / BOTTOM / LEFT / RIGHT /
ON
COLORITRANSP / MOSAIC
C OLOR
BIW BURST : OFF / ON
DAY / NIGHT
BURST : OFF / ON
AU TO
DELAY CNT / OAY-NIGHT / NIGHT-OA Y
NR NR MODE :YIC, OFF,Y ,C
CA
MERA ID OFF / ON
S YNC INT
LANGUAGE
ENGLISH / CHINESS / JAPANESS / ESPANOLIPORTUGUES I
PY
CCKNN I FRANCAIS / DEUISCH
CAMERA RESET / BACK/EXIT / SAVE ALL
• CONNECTING
Monitor
IKEY BOA RD I
DC12 V
GLJ
SPY-B U LLETG
Link wire rule :
Video
GN0-- (:1-- ~
Power "
-E !
l~
IDO WN I -
......
OC12V Power Supply
TROUBLE AND SOLUTION
1. No Picture after provid i ng power
. May be the power supply voltage abnormity , please check the power
supply voltage and pole whether exa.::titude.
.
Please check all the connecting cable and monitors whether be connected
correctly or not.
2. The picture level direction have flowing interference ripples
. May be caused by the power supply AC ripples , it need filter the wave of the
power supply.
. Check the monitor and peripheral equipments used .
3. The picture background color changes cont i nuously
. The fluorescent lamp's electromagnetic field cause color roll. This is proper
phenomenon of the cameras .
.
Reduce the fluorescent lamp numbers or increase the distance between the
camera and the fluorescent lamps can improve it.
.
Use power supply external sync . camera can solve it.
4. The picture smear too mass
. The power supply's voltage unstable .
.
Connecting cables not connect correctly or have high impedance.
' 6, Notes:
..,
eThe power supply must through safe attestation. Its output voltage,
current. voltage polarity
and operating temperature must match the
camera's requirement.
ewhen using the camera in the thunderbolt condition, please note to
mount Anti-thunder device or put off the power supply
plug and cable.
etn order to capture high quality pi ct ures, the power supply's cable and
•
...
video output cable should not be too long.
....Ill
• INTRODUCTION
•
Congratulations on your purchase of this product.
This User Guide suits SPY-BULLETG product. We adopt
the latest SONY technical
of sensor and driver. The most
attractive characteristics are small and easy hidden, suits
the elevator and corridor.
In addition, it owns the charac-
ters of high definition and stability, strong anti-jamming,
rich and real color. Fixing and using this model are con-
venient too. It is very good for you to apply to your CCTV
system.
Please read this instruction manual carefully to en-
sure proper use
of the product.
&
The
symbol is intended to alert the user to the presence of
ortant operating and maintenance (servic i ng)
imp
lnst
ructions in the literature accompanying the appliance.
Lh
The
symbol is intended to alert the user to the presence of
nsulated 'da n gerous voltage' within the product's
uni
enc
Iesure that may be of sufficient Magnitude to constitute
sk of electric shock to persons .a ri
Ll
SHOCK CAUTION:
TO REDUCE THE RISK OF ELECTRIC
DO NOT REMOVE COVER OR BACK NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
CAUTIO
N: TO PREVENT ELECTRIC SHOCKS AND RISK OF
FIRE HAZARDS, DO NOT USE OTHER THAN
SPECIFIED POWER SOURCE.
r ffi Note:
!
e Pie
ase note the camera's operati
ng temperature and its using
ronment requirement. Avoid using the camera
at too high or
low temperatures. The operating temperature is -30-+60'
C.
commendatory operating temperature is -10-+50 'C .)
envi
too
(Re
e
Ne
wis
e Do
ver make the camera face the sun or bright object. Other-
e. it will damage the
ceo .
lilt..
not mount the camera near by the radiator or heater.

• Specification
I
Model
Pick
up
Element
Effective
Picture
Elements
(HxV)
Horizontal
Resolution
Minimum
Illumination
S/N Ratio
Scanning
System
Synchronous
System
Auto
Electronic
Shutter
Gama Characteristic
IR
Distance
Video
Output
. _
_Au.to
.GalrLCon.tw.L
---
Power
/
Current
1
Lens
Dimension (mm)
'
Weight
(g)
I
Storage
Temperature
Operating Temperature
SPY-BULLETG
113"
SONY
Super
HAD
ccqu
NTSC:976(H)
><
494(V),P
A
L:976(1:1,)x582(V)
700 TV Line
0.001 lux/F1.2
More than 52dB
2:1 interface
Internal, Negative sync.
NTSC: 1/60s-1/100,000s, PAL: 1150s-1/100,000s
0.45
40Meters (with
q;
5X42PCS Infrared LED)
1Vpp,
750
Auto
. DC12V(+/-10%)/500mA
2.8-12mm Manual Zoom
lens
200(W)x171(H)x83(D)
1400
-30-+60
"C
RH95% MAX
-10-+50
"C
RH95% MAX
• Packing List
Name Model Number
Weatherproof IR Color Camera SPY-BULLETG 1
User Guide SPY-BULLETG
1
•

PS™
SURVEILLANCE
SYSTEMS
460 Walker Street
Holly
Hill,
FL
32117
PLACE
STAMP
HERE

Cl
PS'"
IMPORTANT!! Please fill
out
this warranty cardto register
your
new
Spyc/ops Surveilance System within 30 days
of
purchase.
SURVEI
LL!\N
CE
SYSTE
fv1S
o
Mr.
o Mrs. o
Ms.
o Miss.
First name Last Name Initial
-----------------------
--------------------
-----
Company Name
___________________________________
Date
of
Birth
____
_
Address--------------
City
____________
State
_____
Zip
__
_
Phone
No.
Model#
--------------
------------------
Store Name Date
of
Purchase Purchase Price $
-----
What influenced you to purchase a Spyclops Surveilance System?
o Price I Value o Sales Person o Features o Others
----------
0 Warranty o Appearance o Brand name
Education
o High School o Some College o Completed College o Graduate School
Marital Status
o Married o Single
Which best describes your total household income?
o Under $20,000 o
$20,000-
$40,000 o $40,001 -$60,000 o Over $60,001
Thanks for
your
time to complete the questionnaire. Your answers are imporlant to us!!

SPYCLOPS Limited Warranty
This limited warranty is provided by Metra Electronics Corporation for the
"SPY
CLOPS" product identified by the purchaser's registration as indicated below, and
there are no other warranties, expressed
or
implied, except as required by law, including
warranties
of
merchantability and fitness for a specific purpose, that are provided for
herein, however all such implied warranties,
if
any, are limited to the duration
of
this
specific limited product warranty. Some states
do
not allow limitations on how long an
implied warranty lasts, so the above limitations may not apply to you.
Metra Electronics Corporation shall not be liable, under any circumstances, for
incidental, indirect, special, consequential
or
multiple damages as a result
of
the sale
or
use
of
this product.
Due
to the nature
of
this electronic product which may be used in a varierty
of
applications, the purchaser must register this product with Metra Electronics Corpoation,
either
by
returning the enclosed registration card
or
registering on line.
It
is
recommended that the purchaser execute and deliver the enclosed registration and
warranty card within ten days
of
purchase.
Limited Product Warranty:
This is a limited warranty, subject to the conditions, limitations and exclusions identified
herein. Metra Electronics Corporation warrants to the original purchaser
of
the registered
or
identified SPYCLOPS product for a period
of
three years from the date
of
purchase,
that the product shall be free
of
defects in design, material and workmanship, and subject
to the limitations set forth below, Metra Electronics Corporation will repair
or
replace, at
its option, any defective unit.
Conditions and Limitations:
1.
Proof
of
purchase is required (i.e. the sales receipt
of
other proof
of
payment)
2. Damage caused by disassembly, accidents, abuse, misuse
or
modification
of
the product will render this warranty null and void.
3. This warranty is applicable only to the original purchaser and
is
not assignable
or
transferable.
4.
The
purchaser is required to send the product back to Metra Electronics Corp.
in accordance with the instructions set forth on the enclosed Warranty card and
the purchaser is responsible for all charges for shipping and handling.
Please note that in accordance with the instructions on the enclosed Warranty
Card, that the product must be returned to Metra Electornics with an assigned
Authorization number (RA).
Any questions
of
Notifications regarding this warranty should be addressed to:
Warranty Department, Metra Electronics Corporation, 460 Walker St., Holly, Hill,
Florida, 32117.
SPYCL@PS
'"
S
URVE
I
LL
A N
CE
SYST
E M S
866.839.9187
460 Walker Street, Holly Hill, FL 32117
www.spyclopsusa.com