SRAM MisMatch2 User manual

6400 West 105th Street / Bloomington, MN 55438 / www.problemsolversbike.com
Thanks for buying a Problem solvers mismaTCh2!
Clean up your handlebars with the MisMatch Adapter. Version 2 allows you to
connect your Shimano I-Spec™ compatible shifters to your Avid hydraullic
brake levers via SRAM’s MatchMaker™ clamp (to perform the opposite
connection, see MisMatch Adapter Verson 1). Enjoy.
WARNING: CYCLING CAN BE DANGEROUS. BICYCLE PRODUCTS SHOULD
BE INSTALLED AND SERVICED BY A PROFESSIONAL MECHANIC. NEVER
MODIFY YOUR BICYCLE OR ACCESSORIES. READ AND FOLLOW ALL PRODUCT
INSTRUCTIONS AND WARNINGS INCLUDING INFORMATION ON THE
MANUFACTURER’S WEBSITE. INSPECT YOUR BICYCLE BEFORE EVERY RIDE.
ALWAYS WEAR A HELMET.
For additional technical and safety information, visit:
www.problemsolversbike.com/safety
ComPaTibiliTy/inTended use
The MisMatch2 is designed for use with Avid Matchmaker compatible brake
levers and Shimano I-Spec compatible shifters. These adapters will simplify and
unclutter your mountain handlebars.
Tools required
4mm Allen wrench
#2 Phillips head screwdriver
Torque wrench
insTallaTion:
Remove the Right Shifter’s I-Spec Integration Unit
NOTE: Let’s be honest with ourselves—we’re going to be messing with the
innards of a shifter. Make sure to be working in a clean, open space so you can
keep track of everything. If you’ve ever tried to find small replacement parts for
these types of components, you know: DON’T LOSE ANYTHING!
NOTE: We demonstrate this installation using a Shimano Saint Shifter
(SL-M820-I). While most of the steps are the same, we STRONGLY
RECOMMEND you visit Shimano’s website to view the installation instructions
and diagram of your shifter: techdocs.shimano.com
1. Start by removing the top bolt of the unit using a 4mm Allen wrench
(figures 1–2). Save this bolt; you’re going to need it.
4743 10/13
mismaTCh adaPTer 2 insTruCTions
Figure 1
Figure 2
ITEM NO. DESCRIPTION QTY.
1 MisMatch Adapter 2 - left 1
2 MisMatch Adapter 2 - right 1
3 M5 x 10mm bolt 2
1 2
3

6400 West 105th Street / Bloomington, MN 55438 / www.problemsolversbike.com
2. Flip over the shifter, identify and remove the four screws holding the bottom
plate (figure 3).
3. With the bottom plate removed, identify and remove the screw holding the
I-Spec integration unit in place (figure 4). Pull off the I-Spec integration unit
and put that screw right back in there for safekeeping (figure 5).
4. Reassemble the shifter.
Attach MisMatch Adapter to the Shifter
5. Using the bolt you removed in Step 1, attach the Problem Solvers MisMatch
adapter to the shifter (figures 6–7). Torque: 2.5Nm (22 in-lbf).
mismaTCh adaPTer 2 insTruCTions
Figure 6
Figure 7
Figure 3
Figure 4
Figure 5

6400 West 105th Street / Bloomington, MN 55438 / www.problemsolversbike.com
Attach the MisMatch Adapter to the Brake Lever
6. With your Avid brake levers and MatchMaker installed according to Avid’s
instructions (www.sram.com/avid), attach the MisMatch Adapter to the brake
lever using the M5 x 10mm bolt (figures 8–10). Torque: 5Nm (44 in-lb).
7. Repeat these steps for the left shifter.
ongoing mainTenanCe
Periodically check to make sure all attachment bolts are properly torqued.
a limiTed 2-year WarranTy
PROBLEM SOLVERS™warrants this new PROBLEM SOLVERS product against
defects in materials and workmanship for two (2) years from the original date
of retail purchase by the consumer. This limited warranty is expressly limited
to the repair or replacement of the original product, at the option of PROBLEM
SOLVERS, and is the sole remedy of the warranty. This limited warranty
applies only to the original purchaser of the PROBLEM SOLVERS product and
is not transferable.
In no event shall PROBLEM SOLVERS be liable for any loss, inconvenience
or damage, whether direct, incidental or consequential or otherwise resulting
from breach of any express or implied warranty or condition of merchantability,
fitness for a particular purpose, or otherwise with respect to this product except
as set forth herein. This warranty gives the consumer specific legal rights, and
those rights and other rights may vary from state to state.
This warranty does not cover the following:
• Damage due to improper assembly or follow-up maintenance or lack of skill,
competence or experience of the end user
• Products that have been modified, neglected, used in competition or for
commercial purposes, misused or abused, involved in accidents or anything
other than normal use
• Damage or deterioration to the surface finish, aesthetics or appearance
of the product
• Normal wear and tear
• Labor required to remove and/or refit and re-adjust the product within the
bicycle assembly
TO THE EXTENT NOT PROHIBITED BY LAW, THESE WARRANTIES ARE
EXCLUSIVE AND THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES
OR CONDITIONS INCLUDING WARRANTIES OR CONDITIONS OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Figure 10
mismaTCh adaPTer 2 insTruCTions
Figure 8
Figure 9