8
Overview
Display symbols
Overview of symbols Connection quality Doormatic activated
42
Display of connection quality
from the cordless handset
to the base station/DECT
repeater in 5steps: Full,
good, medium, poor and no
reception:
In the Eco mode, this symbol
is shown in green.
The door release is activated
automatically at the door
after actuating the call button
– the Doormatic can be acti-
vated for a certain door or for
all doors.
Missed calls Door calls deactivated
42 Number of missed public
network and door calls. In this
example, 42 calls have been
missed.
Ring tone silencing is acti-
vated for door calls. Calls
from other indoor devices and
from the telephone system
continue to be acoustically
signalled.
Keypad lock activated Battery charge status
The keypad lock prevents
unintentional operation of the
telephone. Depending on the charge
status of the battery (full,
medium, low and almost
empty) one of the following
symbols is displayed:
Ringtone muting activated Battery charging process
Ring tone silencing is acti-
vated for all incoming calls.
The battery is charged.
Microphone silencing activated Handsfree on
The microphone at the Scope
is muted. Your conversation
partner is unable to listen in.
Press the left-hand softkey
(mouth symbol) in order to
switch on the handsfree func-
tion (only possible during a
call/while dialling).
Door call forwarding is activated Handsfree off
Incoming door calls are
forwarded to a previously
dened call number.
Press the left-hand softkey
(mouth symbol with line
through) in order to switch off
the handsfree function (only
possible during a call/while
dialling).
General information
The display symbols show the status
of the different device functions and
are located in the upper and lower
display area. If a function is active,
its display symbol is shown. The
following display symbols are perma-
nently shown:
• Signal quality to the base station
(top left)
• Battery charge status (top right)
