St Helens Festive 14 Piece Light-up Music Train Set User manual

• Only use fresh alkaline batteries. All batteries should be recycled.
• Do not use this item for anything else than its intended purpose.
• Remove batteries when not in use or when the batteries have been exhausted.
• Take care not to damage the product when assembling.
INTRODUCTION
Thank you for buying your Festive train set. We hope you will enjoy using it throughout the festive period.
These instructions should be read carefully and left with the user of the product for future reference.
PRODUCT SAFETY
• This product is not a toy and is designed to complement a Christmas decorative arrangement.
PARTS LIST
The set contains the following parts. Check and make sure that all the following components are in the
box and all parts are not damaged. If any damage is detected, then contact your supplier for support.
1 x engine
3 x carriages
8 x curved track
2 x straight track
Children under 3 must not play with this product. Children over 3 should only use this
product with adult supervision. There are small parts in this kit
There are small parts in this kit
GH917
Festive 14 Piece Light -up
Music Train Set
x8
x2

August 2021
2
MAINTENANCE
• Store in a dry clean space when not in use
• Do not leave the batteries in when not in use
• Clean only with a slight damp cloth
DISPOSAL AND RECYCLING
You must not dispose of this product with domestic household waste.
Most local authorities have specic collection system for electronic items and disposal is free of charge
to the end-user.
BATTERY INSTALLATION
• Make sure the unit is switched off
• Locate the battery cover on the train or re tender (see g. 1)
• Using a small cross blade screwdriver loosen the battery cover (see g 2 and 3.)
• Carefully remove batteries if required
• Carefully insert 2 x AA batteries (not supplied)
• Replace the battery cover
ASSEMBLY INSTRUCTIONS
• Attach the track together (see g. 5)
• Carefully place the engine and the
carriages on the assembled track so that
all the wheels sit on the track
• Attach the carriages using the couplings on
the rear of the engine/carriage
• Make sure the track is clear of obstructions
and switch on (see g. 4 and 6)
Fig. 1 Fig. 2 Fig. 3 Fig. 4
Electrovision Ltd., Lancots Lane, Sutton Oak, St. Helens, Merseyside WA9 3EX
website: www.electrovision.co.uk
Fig. 5
Fig. 6