Stac PCM-250 User manual

Power Over CameraLink SELECTOR / DISTRIBUTOR / REPEATER
This unit works as a digital signal selector, a distributor and a repeater which is
compliant with PoCL(Power over CameraLink) standard. Input terminal is SDR
and output terminal is MDR. Signal from PoCL compatible camera can connect to
standard CameraLink device without conversion cable. When using as a selector,
by switching input of 2 device, image processing board can be reduced by half .
When using as a distributor, distributed and parallel processing available with 2
distribute output and building image processing system.
Control signal(CC1-CC4) and transfer line(SerTFG,SerTC) specified with
CameraLink Base Configuration can select input/output from switch of front panel
or external signal,
Overview
Features
SELECT and
PoCL MODE
(Input Penel)
- Compliant with CameraLink Base configuration (Standard specification of FA digital
camera).
- The unit works as a selector and a distributor, easily switch depend on the system.
- Input/Output system of control signal(CC1- CC4), communication
line(SerTFG,SerTC) is selectable.
- Remarkable compact body that can be placed anywhere.

Input signal
Output signal
External remote
CLK frequency
Power supply/ consumption
Temperature/Humidity
Size
Weight
Accessories
株式会社 スタック
〒350-1306 埼玉県狭山市富士見1-22-3
TEL: [phone] FAX: [phone]
URL: http://www.stac.co.jp/
PoCL 2 input connecter SDR
CameraLink Base Configuration 2 output connecter MDR
0-5V TTL
20MHz-85MHz(MAX)
DC 12V/ 9W(with attached AC adapter)
0°C-40°C、0%-80% (no condensation)
150(W)×36(H)×80(D)mm
0.5 kg
AC adapter x 1, Instruction manual x 1
Specifications
Output panel
STAC Corporation
1-22-3, Fujimi, Sayama-shi, Saitama, 350-1306 JAPAN
TEL: [phone] FAX: [phone]
URL: http://www.stac.co.jp/
Switch MODE to use as a distributor, repeater or selector.
Distributor mode
Distributor
Selector
Selector mode
* Product appearance and specifications are subject to change without notice.
PCM-250
Image processing
board
System connection example
Repeater
Repeater mode
Image processing
board
Image processing
board
Image processing
board
CameraLink
compatible cable
PoCL cable
PoCL
compatible camera
CameraLink
compatible cable
CameraLink
compatible cable
DC 12V IN
Switch functions by SELECT of front panel and MODE.
PoCL cable
PoCL
compatible camera
PoCL cable
PoCL
compatible camera
PCM-250
PCM-250
D Select CC1-4,SerTC,Ser TFG of OUTPUT A
D Select CC1-4,SerTC,Ser TFG of OUTPUT B
S,D Select A,B from REMOTE terminal
SELECT MODE functions
S Select image signal of INPUT A
S Select image signal of INPUT B
Ａ
Ｂ
Ｒ
MODE
D=Distributor
R=Repeater
S=Selector