Stamps Ledgetop Counter Installation guide

Assembly Instruction Manual
Ledgetop Counter

Mallet
Assembly Instruction Manual ledgetop counter
Recommended Tools for Assembly
Phillips Screw Driver
Cam Lock Screws (63)
Page 1 of 11
1.25in Screws (5)
Parts Included:
Camlock Nut (pre-installed already (63)) Shelf Clip (9) White Round Stickers (13)
Round Stickers (19)

Assembly Instruction Manual Ledgetop Counter
Parts Included:
Bottom Base
Bottom Base Sides
Ledgetop
Front Upper
Ledgetop Panel
Front Lower Panel
Recess Countertop
Middle
Divider
Right Panel
Left Panel
Front Panel
Back Panel Right Panel
Left Panel
Drawer
Base
Drawer Parts Included:
Page 2 of 11
Shelves (2) Key for Lock
(pre-installed lock)

Ledgetop Counter Assembly Instruction Manual
Step 1
Screw cam lock pins in small holes of bottom base. Set bottom base sides on top of bottom base
camlock pins. Make sure arrows on cam lock nuts are facing to the right. Then tighten with screw
driver. Note: Hardware on bottom base sides should point inward. (See Diagrams)
Diagram 1A
Diagram 1B
Diagram 1C
Page 3 of 11
Camlock Nut
Closeup

Diagram 2A
Diagram 2B
Ledgetop Counter Assembly Instruction Manual
Step 2
Screw cam lock pins in small holes of the front lower panel. Place middle divider on top of camlock
pin holes. Make sure arrows on cam lock nuts are facing to the right. Then tighten with screw driver.
(See Diagrams)
Page 4 of 11

Diagram 3A
Ledgetop Counter Assembly Instruction Manual
Step 3
Line up front lower panel and middle divider on top of the bottom base camlock pins. Make sure
arrows on cam lock nuts are facing to the right. Then tighten with screw driver. (See Diagram 3A)
Page 5 of 11

Diagram 4A
Ledgetop Counter Assembly Instruction Manual
Step 4
Place camlock pins into the the recessed countertop. Then place recessed countertop on top of the
rest of the unit. Then tighten with screw driver. (See Diagram 4A)
Page 6 of 11

Diagram 5A
Ledgetop Counter Assembly Instruction Manual
Step 5
Place camlock pins on other side of the recessed countertop. Set front upper ledgetop panel on top
of recessed countertop camlock pins. Then tighten with screw driver. (See Diagram 5A)
Page 7 of 11

Diagram 6A
Diagram 6B
Ledgetop Counter Assembly Instruction Manual
Step 6
Place cam lock pins on ledgetop. Then setl ledgetop on top of the recessed countertop. Then
tighten with screw driver. (See Diagrams)
Page 8 of 11

Diagram 7A
Diagram 7B
Ledgetop Counter Assembly Instruction Manual
Step 7
Place camlock pins on right and left panels. Attach panels to the rest of the unit. Then tighten with
screw driver. (See Diagrams)
Page 9 of 11