Star Shaper KC-2934 User manual

1
KC-2934
FOLDING BIKE

I
IN ND DE EX X
Important Safety Information
……………………
1
Exploded-View Assembly Drawing
………………..…..
2
Parts List
……………………………………………….…
3
Assembly Instruction
……………………………..……
4-7
Exercise Instructions
…………………………………..…
8-9
Exercise Computer
……………………………….……
9-10
Folding Bike Storage
………………………….……
11
Trouble Shooting
…………………………….……
12

1
IMPORTANT SAFETY INFORMATION
Please keep this manual in a safe place for reference.
1. Itis important to read this entire manual before assembling and using the equipment. Safe
and efficient use can only be achieved if the equipment is assembled, maintained and used
properly. It is your responsibility to ensure that all users of the equipment are informed of all
warnings and precautions.
2. Before starting any exercise program you should consult your doctor to determine if you have
any physical or health conditions that could create a risk to your health and safety, or prevent
you from using the equipment properly. Your doctor's advice is essential if you are taking
medication that affects your heart rate, blood pressure or cholesterol level.
3. Be aware of your body's signals. Incorrect or excessive exercise can damage your health.
Stop exercising if you experience any of the following symptoms: Pain, tightness in your
chest, irregular heartbeat, extreme shortness of breath, feeling light headed, dizzy or
nauseous. If you do experience any of these conditions you should consult your doctor before
continuing with your exercise program.
4. Keep children and pets away from the equipment. The equipment is designed for adult use
only.
5. Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet.
For safety, the equipment should have at least 0.5 meter of free space all around it.
6. Before using the equipment, check the nuts and bolts are securely tightened.
7. The safety level of the equipment can only be maintained if it is regularly examined for
damage and/or wear and tear.
8. Always use the equipment as indicated. If you find any defective components whilst
assembling or checking the equipment, or if you hear any unusual noise coming from the
equipment during use, stop. Do not use the equipment until the problem has been rectified.
9. Wear suitable clothing whilst using the equipment. Avoid wearing loose clothing which may
get caught in the equipment or that may restrict or prevent movement.
10. The equipment has been tested and certified to EN957 under class H.C. Suitable for
domestic, home use only. Maximum weight of user: 100kg. Braking is speed independent.
11. The equipment is not suitable for therapeutic use.
12. Care must be taken when lifting or moving the equipment so as not to injure your back.
Always use proper lifting techniques and/or use assistance.
13. All moveable accessories (eg. pedal, handlebar, saddle....etc.) require weekly
maintenance. Check them before use every time. If anything broken or loose, please fix
them immediately. You may continue using bike after they return to good conditions.
Please contact our customer services on 01274-693888
Monday-Thursday 08:00~16:30
Friday 08:00~15:30
or by mail [e-mail]
* This service is available for UK residents only .

2
EXPLODED-VIEW ASSEMBLY DRAWING
1
2
3
4
5
6
6
7
8
7
8
9
10
11
12L
12R
13
14
15
16
17
18
19
20
21
7
22
23
24
25

3
PARTS LIST
PART
NO.
DESCRIPTION
QTY
PART
NO.
DESCRIPTION
QTY
1
Main frame
1
13
Adjustment knob
1
2
Rear stabilizer
1
14
Lock pin
1
3
Front stabilizer
1
15
Seat post
1
4
Adjustable end cap
2
16
Lock nut (M8)
3
5
Front stabilizer end cap
2
17
Washer (φ8)
3
6
Bolt ( M8*60)
4
18
Seat
1
7
Curved washer (φ8)
6
19
Tension knob
1
8
Domed Nut (M8)
4
20
Handlebar
1
9
Chain Cover
1
21
Handlebar foam
2
10
Safety Cover
1
22
Bolt ( M8*40)
2
11
Crank
1
23
Computer
1
12R
Pedal ( R )
1
24
Computer wire
1
12L
Pedal ( L )
1
25
Lower wire
1
#6x4(M8 x 60mm) #7 x6 ( 8) #8 x4 (M8) #22x2(M8 x 40mm)
#14x1

4
14
8
78
7
6
6
3
2
1
ASSEMBLY INSTRUCTION
STEP 1
1. Pull the safety-pin (14) as the picture A shows. Insert the pin (14) when opening the X-Bike as
the picture B shown
2. Attach front stabilizer (3) onto the product by insert bolts (6) through it and the main
frame (1) base, fasten with curved washer (7) and domed nut (8).
3. Attach rear stabilizer (2) onto the product by insert bolts (6) through it and the main
frame (1), fasten with curved washer (7) and domed nut (8).
14
14

5
15
13
1
18
17
16
15
STEP 2
Attach seat (18) onto seat post (15) by
fasten them with lock nut (16) and washer
(17).
STEP 3
Insert seat post (15) into main frame (1)
and use adjustment knob (13) to lock it
to the desired height to set up the
sitting position.
1
NOTICE!
This line mark on the
seat post is for “STOP”
position.

6
12L
12R
11
22
7
21
20
1
s
STEP 4
Attach handlebar (20) onto main frame (1),
fasten bolts (22) and curved washers (7) to
stabilize it.
Put on handlebar foam (21) over handlebar
(20) to for comfort grips.
Notie: The foam handlebar covers can be
tricky to fit as they are designed to grip
tightly. Please use a mild soapy water
solution to help you slide the foam onto the
handlebars.
.
STEP 5
Crew pedals (12R,12L) onto the crank (11)
to complete the product setup
Note that the right pedal should be threaded
on clockwise and the left pedal on
anti-clockwise
.

7
STEP 6
Install Battery to the computer (23) in the
battery compartment located in the back and
connect the computer wire (24) and lower
wire (25).
Slide the computer (23) down to the
Computer Bracket situated at the top of the
handlebar (20).
24
23
25 20

8
EXERCISE INSTRUCTION
Using your FOLDING BIKE will provide several benefits, it will improve your physical fitness and
flexibility, tone muscles and in conjunction with a calorie controlled diet help you lose weight.
1.The Warm Up Phase
This stage helps to get the blood flowing around the body and the muscles working properly. It will
also reduce the risk of cramp and muscle injury. It is advisable to do a few stretching exercises as
shown below. Each stretch should be held for approximately 30 seconds, do not force or jerk your
muscles into a stretch - if it hurts, STOP.
2.The Exercise Phase
This is the stage where you put the effort in. After regular use, the muscles in your legs will become
more flexible. Work to your own level but it is important to maintain a steady tempo throughout. The
rate of work should be sufficient to raise your heart beat into the target zone shown on the graph
below.
SIDE BENDS OUTER THIGH
INNER THIGH
FORWARD
BENDS
CALF / ACHILLES
This stage should last for a minimum of 12 minutes though most people start at
a lower level and build up to about 15-20 minutes

9
3. The Cool Down Phase
This stage is to let your cardio-vascular system and muscles gradually slow and cool down. This is a
repeat of the warm up exercise e.g. reduce your tempo, continue for approximately 5 minutes. The
stretching exercises should now be repeated, again remembering not to force or jerk your muscles
into the stretch.
As you get fitter you may need to train longer and harder. It is advisable to train at least three times a
week, and if possible space your workouts evenly throughout the week.
MUSCLE TONING
To tone muscle while on your FOLDING BIKE you will need to have the resistance set quite high. This
will put more strain on our leg muscles and may mean you cannot train for as long as you would like.
If you are also trying to improve your fitness you need to alter your training program. You should train
as normal during the warm up and cool down phases, but towards the end of the exercise phase you
should increase resistance by making your legs work harder than normal. You will have to reduce
your speed to keep your heart rate in the target zone.
WEIGHT LOSS
The important factor here is the amount of effort you put in. The harder and longer you work the more
calories you will burn. Effectively this is the same as if you were training to improve your fitness, the
difference is the goal.
USE THE FOLDING BIKE
The seat height can be adjusted by removing the adjustment knob and raising or lowering
the seat. There are 4 holes in the seat post allowing for a range of heights. Once the correct
height has been chosen, refit the adjustment knob and tighten.
BIKING: Sit on the seat post, step on the pedals and both hands hold on the handlebars. Move the pedals
forward to do the body workout. The tension control knob allows you to alter the resistance of the pedals. A
high resistance makes it more difficult to pedal, a low resistance makes it easier. For the best results set the
tension while the bike is in use.
SETING OF THE LOAD AND ADJUSTMENT:
You can turning tension control knob by “+ ”for more
resistance or by “–“for less resistance during training.
It depend on personal condition.

10
EXERCISE COMPUTER
SPECIFICATIONS:
TIME……………………………………………………….………..00:00-99:59
SPEED(SPD)..………………………………………………..……0.0-99.9KM/H (ML/H)
DISTANCE(DIST)……………………………………………….....0.00-999.9KM (ML)
CALORIE(CAL)……………………………………………….....…0.0-9999KCAL
※PULSE (PUL) ……................................................................40~240BPM
KEY FUNCTIONS:
MODE(SELECT/RESET):
This key lets you to select and lock on to a particular function you want.
OPERATION PROCEDURES:
1.AUTO ON/OFF
The system turns on when any key is pressed or when it sensor an input from the speed sensor.
The system turns off automatically when the speed has on signal input or no key are pressed for
approximately 4 minutes.
2. RESET
The unit can be reset by either changing battery or pressing the MODE key for 3 seconds.
3. MODE
To choose the SCAN or LOCK if you do not want the scan mode, press the
MODE key when the pointer on the function you want which begins blinking.
FUNCTIONS:
1. TIME: Press the MODE key until pointer lock on to TIME. The total working time will be shown
when starting exercise.
2. SPEED: Press the MODE key until the pointer advance to SPEED. The current speed will be
shown.
3. DISTANCE: Press the MODE key until the pointer advance to DISTANCE. The distance of each
workout will be displayed.
4. CALORIE: Press the MODE key until pointer lock on to CALORIE. The calorie burned will be
displayed when starting exercise.
5.SCAN: Automatically display changes every 4 seconds.

11
FOLDING BIKE STORAGE
Pull the locking pin (14) out of the main frame, then push the rear stabilizer (2). And in insert the
locking pin in to the hole.

12
TROUBLE SHOOTING.
1. Change the battery. To change the computer battery, please slide the computer from the
computer holder, remove the battery cover on the back of the computer console, and remove the
batteries. Replace with 1 x AA batteries. Finally put the cover back on the console, and slide the
computer back on the computer holder.
2. Computer not working correctly. If your computer is not working correctly, please check
whether the lower sensor wire is connected to the upper sensor wire, and make sure the upper
sensor wire is connected to the computer wire. When you have checked the above, and the
computer still not working, then please make sure the batteries are installed correctly in the
computer and that the batteries are still working.
MAINTENANCE
1. Before using the bike, always make sure all bolts/nuts are fully tightened.
2. A spent battery is hazardous waste, please dispose of it correctly, and do not throw it in the
trash.
3. When eventually you want to scrap the machine, you should remove the batteries from the
computer, and dispose separately as hazardous waste.

13
E
EX XE ER RC CI IS SE E N NO OT TE ES S U
Us se e t th hi is s s sp pa ac ce e t to o r re ec co or rd d y yo ou ur r o ow wn n e ex xe er rc ci is se e r ro ou ut ti in ne e r re es su ul lt ts s

14