STAR TEC 4UDRAWER User manual
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support
Manual Revision: July 28, 2023 1:41 PM
Product ID
4UDRAWER
Component Function
1Drawer Key Lock
• Use the included Set of Keys to Lock or Unlock
the Drawer
• Rev 02 and above only
2Drawer Handle • Use to Open or Close the Drawer
3Mounting Brackets
• Fasten the Drawer to the Front Posts of the
Rack or Cabinet
• Two Mounting Holes on each side of the
Drawer allow for rack mounting
4U Storage Drawer for 19” Server Racks
How to Identify the LOT Code Revision Number
The Revision Number (Rev #) appears as the fth and sixth digits of the LOT code,
located on the sticker axed to the product and its packaging. If the LOT code sticker
is missing, the product is Rev 01.
Requirements
For the latest drivers/software, technical specications, and declarations of
conformance, please visit: www.StarTech.com/4UDRAWER
• Phillips Head Screwdriver
Package Contents
• 4U Storage Drawer x 1
• M5 (Rev 01) or M6 (Rev 02 and Above) Screws and Cage Nuts x 4
• Plastic Washers x 4 (Rev 02 and Above)
• Set of Keys x 1 (Rev 02 and Above)
Installation
Warnings!
Read the entire Quick-Start Guide and ensure the instructions are fully understood
before assembling and using this product. Before adding equipment to this product,
ensure this product has been properly mounted. Never operate this product if parts are
missing or damaged. Ensure the weight of the equipment does not exceed the weight
capacity of this product. If the weight capacity is exceeded, personal injury or damage
to the equipment is possible. This product can support 55.1 lb (25 kg). The maximum
supported weight is only possible when both mounting brackets are properly mounted
to two front posts on a rack. Arrange your equipment in the rack in descending order
of weight. The lightest equipment is installed at the top of the rack, and the heaviest is
on the bottom.
1. Locate a suitable section in the Rack/Cabinet to mount the 4U Storage Drawer.
The Drawer itself requires 4U of space within the Rack or Cabinet.
2. (Optional) If the Rack uses Square Mounting Holes, install the included Cage Nuts
into the Square Mounting Holes on the Front Posts of the Rack.
3. Place the Drawer into the Rack and align the Mounting Holes on the Mounting
Brackets of the Drawer with the Mounting Holes on the Rack (e.g. the cage nuts, if
used).
4. Use a Phillips Head Screwdriver,and the included M5 or M6 Screws and Plastic
Washers to secure the Drawer to the Rack.
3
2
1
*Product may vary from image
Regulatory Compliance
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-
party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only
and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which
this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered
trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the
property of their respective holders.
PHILLIPS® is a registered trademark of Phillips Screw Company in the United States or other countries.
Warranty Information
This product is backed by lifetime warranty.
For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)
for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of
business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations
or exclusions contained in this statement may not apply to you.
Safety Measures
Assemble this product according to the instructions. Read the entire manual and ensure the instructions are fully understood
before assembling and/or using this product.
Mesures de Sécurité
Assemblez ce produit conformément aux instructions. Lisez l’intégralité du manuel et assurez-vous que les instructions sont
bien comprises avant d’assembler et/ou d’utiliser ce produit.
Veiligheidsmaatregelen
Monteer dit product volgens de instructies. Lees de gehele handleiding en zorg ervoor dat u de instructies volledig begrijpt
voordat u dit product monteert en/of gebruikt.
Säkerhetsåtgärder
Montera produkten enligt instruktionerna. Läs hela manualen och se till att du har förstått instruktionerna innan du monterar
och/eller använder produkten.
Sicherheitsmaßnahmen
Bauen Sie dieses Produkt gemäß der Anleitung zusammen. Lesen Sie das gesamte Handbuch und stellen Sie sicher, dass Sie die
Anweisungen vollständig verstanden haben, bevor Sie dieses Produkt zusammenbauen und/oder verwenden.
安全対策
最初に取扱説明書を最後まで読み、本製品の組み立て方をすべて理解してから組み立て作業を始めて下さい。
Misure di Sicurezza
Leggere l’intero manuale e assicurarsi di aver compreso tutte le istruzioni prima di iniziare ad assemblare e a utilizzare questo
prodotto.
Medidas de Seguridad
Monte este producto siguiendo las instrucciones. Lea todo el manual y asegúrese de que las instrucciones se entienden
completamente antes de montar y/o utilizar este producto.
FR: startech.com/fr
DE: startech.com/de
ES: startech.com/es
NL: startech.com/nl
IT: startech.com/it
JP: startech.com/jp
StarTech.com
Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Rd,
Brackmills
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.
StarTech.com Ltd.
Siriusdreef 17-27
2132 WT Hoofddorp
The Netherlands
FR
www.quefairedemesdechets.fr
ASSOCIATION MAGASIN DÉCHÈTERIE
OU OU
Pensez à
donner ou
recycler
FR
Note: If the included Cage Nuts and M5 or M6 Screws are not used, please use the
recommended hardware by the Rack’s manufacturer.
5. Ensure the M5 or M6 Screws are properly tightened and the Drawer has no
movement before placing anything inside.
