Starkey hearing technologies Tv streamer User manual

Pairing

Starkey®Hearing Technologies TV must be paired to interact with Livio™AI and Livio hearing aids. Pairing occurs once,

then the hearing aids and TV streamer will automatically recognize each other. The TV streamer can be paired within

Inspire®or outside of Inspire. Livio AI and Livio hearing aids can be paired with up to ﬁve TV streamers.

Launch Inspire, connect and detect hearing aids.

Select “Accessories” on the left navigation bar.

Ensure the TV streamer is powered on.

Place the hearing aids within 6 inches of the TV streamer.

Place the TV streamer in pairing mode with a short press

of the pairing button. The LED will rapidly blink blue.

Select “Pair” to put the hearing aids into pairing mode A.

Pairing is successful when the TV streamer image displays

in the accessory screen B.

Use the drop-down menu below the streaming accessories

box to set “Hearing Aid Mic While Streaming” C.

Select the information icon for pairing instructions if needed D.

Power off any mobile phone or other

accessories that were previously paired

with the hearing aids.

Ensure the TV streamer is powered on.

Open and close the battery doors

of the hearing aids.

Place the hearing aids within 6 inches

of the TV streamer.

Press the Bluetooth®button on the

TV streamer to place in pairing mode.

The LED will rapidly blink blue.

Once the LED blinks green for each

hearing aid, both hearing aids are paired.

The TV streamer will recognize if the ﬁtting

is monaural or binaural and pair one or

two hearing aids accordingly.

Volume up

Power on/off

Pair

Volume down

Starkey Hearing

Technologies TV

3 5

Pairing within Inspire

Pairing outside of Inspire

An unlimited number of Livio AI and/or Livio

hearing aid users can connect to the TV

streamer at one time, allowing them to share

in the same listening experience.

The TV streamer supports both analog

and digital input and can be successfully

connected to many electronic audio sources

including televisions, computers, MP3 players,

DVD players, cable boxes, and Amazon®Echo

and Echo Dot (3.5mm Jack).

Streamed audio volume level can be adjusted

via the hearing aid user control, TV streamer,

remote control or Thrive™Hearing app.

Volume

Basic Setup

Use

A B C D

Power Supply Jack (micro USB)

AToslink Jack

BAnalog 3.5mm Jack

CMono/Stereo Switch

Audio streaming may be started/stopped in several ways:

• Hearing Aid User Control: Push & Hold or Double Tap2

• Remote Control: Favorite Button

• Thrive Hearing app

Audio streaming will stop when:

• The TV device is powered off.

• A phone call via direct mobile phone connection or connection

with Remote Microphone + is received. After the phone call

concludes, all streaming stops. If desired, the TV stream will need

to be manually restarted.

• If the user walks out of range of the TV stream (Up to 45 feet or

15 meters) streaming stops and will need to be manually restarted.

1Accessories only pair to hearing aid (not to iPhone/app). 2Double Tap feature only available on Livio AI products.

Livio AI and Thrive are compatible with iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPad Pro, iPad Air 2, iPad Air, iPad

(4th generation), iPad mini 4, iPad mini 3, iPad mini with Retina display, iPad mini, iPod touch (5th generation) and Apple Watch. Use of Apple Watch requires iPhone 5 or later.