stead Curved Back Sofa User manual

F
D
EG
B
D
H
E
F
Curved Back Sofa Assembly Instructions
STEP 2
STEP 1
A
Lay seat (A) on a soft surface
Attach front legs (B) with 5 bolts (D), 5 spring washers (F), and 5 flat washers (E), in the center of the
frame, using the allen key (H) to tighten
PAGE 1/3
Questions? Contact [email protected]
Components List
QtySketchNo. Description
01
01
02
05
07
07
02
A
B
C
D
G
E
F
Sofa back
and seat
cushion
Front legs
Back legs
Bolt *60mm
Flat Washer
Spring Washer
Bolt *30mm
BEFORE ASSEMBLING:
Ensure all hardware and pieces are removed
from the packaging before discarding the box.
Make sure all pieces are accounted for before
beginning installation.
To protect your piece, we recommend
assembling it on a blanket or a flattened box.
Pay close attention to all holes on each panel as
they are directional. Follow the included
diagrams closely.
01
H
Allen Key

STEP 4
STEP 3
C
C
Attach the corner brackets on the front legs (B) with
2 bolts (G), 2 spring washers (F), and 2 flat washers
(E), using the allen key (H) to tighten
Attach back legs (C) turn clockwise
to tighten
PAGE 2/3
Questions? Contact [email protected]
F
E
G
H
EFD
G
B

FINISH
Flip over, sit down, and enjoy!
PAGE 3/3
Questions? Contact [email protected]