Stealth Products GAT400M-51M User manual

Installation Manual
GAT440M-51M (Left/Right)
Micro Joystick Assembly
Compatible GAT400 Series Mounting
INSTALLATION INSTRUCTIONS FOR
Stealth Products: IDM-MICRO-9
mo-Vis: P002-51 Micro Joystick

i
Customer Satisfaction 1.0
Stealth Products, LLC
104 John Kelly Drive, Burnet, Texas 78611
[phone]
[phone]
[e-mail]
http://www.stealthproducts.com
Stealth Products strives for 100% customer sasfacon. Your complete sasfacon is
important. Please contact us with feedback or suggested changes that will help
improve the quality and usability of our hardware. You may reach us at:
Stealth Commitment 1.1
Installation Date :
Dealer :
Dealer Stamp :
Serial Number :

ii
Warning Labels 2.0
Warning Labels 2.1
Warnings are included for the safety of the user, client, operator and property. Please
read and understand what the signal words SAFETY, NOTICE, CAUTION, WARNING
and DANGER mean, how they could affect the user, those around the user, and property.
Limited Liability 2.2
Stealth Products, LLC accepts no liability for personal injury or damage to property that
may arise from the failure of the user or other persons to follow the recommendations,
warnings, and instructions in this manual.
Stealth Products does not hold responsibility of final integration of final assembly of
product to end user. Stealth Products is not liable for user death or injury.
Testing 2.3
Initial setup and driving should be done in an open area free of obstacles until the user is
fully capable of driving safely.
The hardware should always be tested without any person sitting in the wheelchair, and
until every alteration of the physical installation or adjustment of the joystick is complete.
DA NGER Identifies an imminent situation which (if not avoided) will
result in severe injury, death,and property damage.
WA RNIN G Identifies a potential situation which (if not avoided) will
result in severe injury, death,and property damage.
CA UTION Identifies a potential situation which (if not avoided) will
result in minor to moderate injury,and property damage.
NOTICE
Identifies important information not related to injury, but
possible property damage.
SAFETY
Indicates steps or instructions for safe practices, reminders of
safe procedures, or important safety equipment that may be
necessary.

iii
Table of Contents 3.0
1.0 Customer Satisfaction .............................................................................i
1.1 Stealth Commitment .............................................................................................i
2.0 Warnings ..................................................................................................ii
2.1 Warning Labels.......................................................................................................ii
2.2 Limited Liability.......................................................................................................ii
2.3 Testing ......................................................................................................................ii
3.0 Table of Contents.................................................................................. iii
4.0 Parts and Accessories ........................................................................... 1
4.1 Mounting Hardware Parts ............................................................................... 1
4.2 Tools ........................................................................................................................ 1
5.0 Installation Instructions ....................................................................... 2
5.1 Installing Mount and Joystick ........................................................................ 2
5.2 Mounting Height Adjustment ....................................................................... 3
6.0 Maintenance .......................................................................................... 4
6.1 Maintenance ......................................................................................................... 4
6.2 Cleaning ................................................................................................................. 4
6.1 Disinfecting ........................................................................................................... 4
7.0 Warranty ................................................................................................ 5
7.1 In Case of Product Failure ..................................................................................5

1
Parts and Accessories 4.0
Mounting Hardware Parts 4.1
A Eclipse/Mini Tray
B Mount B1 Mounting Strap
C Micro Joystick1
1 10-32 x 1/4” BHS 1A 1/4” Steel Washer
2 10-32 x 3/8” BHS
3 10-32 x 5/8” BHS
4 5/32” Allen (Hex Key)
1. Not included
Screws & Tools 4.2
GAT440M-51M includes:

2
Installation Instructions 5.0
CAUT ION
DO NOT OVER TIGHTEN SCREWS. This could cause wearing of screws
or joystick threads, causing the client to lose efficient control.
Installing Joystick 5.1
Step 1. Release mounting clamp (B1) from GAT440M-51M mount (B), loosening clamping screw
(1). Loosen screws (2) from one of the sides of mounting clamp (B1) and insert Micro
Joystick (C). Micro Joystick comes with default mounting clamp, remove it.
Step 2. Tighten screws (2) from mounting clamp (B1) and set into position in the mount (B) slot.
Replace clamping screw.
Step 3. Tighten the screw (1) with 5/32” Allen Wrench (Hex Key) (4), but do not over tighten.

3
Installation Instructions 5.0
Mounting Height Adjustment 5.2
NO TE
Mount has a 2in. (5.08 cm) range of adjustment.
Step 1: Loosen clamping screw (1). Step 2: Slide mounting clamp (B1) in mount (B)
adjustment slot to the desired position.
Tighten screw (1) when done.

4
Maintenance 6.0
Maintenance 6.1
Check every 6 months that screws are tight. Gently tighten any screws
that may have become loose.
Maintain that the hardware is clean and free of dust.
Disinfecting 6.3
Use a damp cloth with any disinfectant detergent and lightly rub
hardware surface.
Rinse thoroughly with clean water.
Cleaning 6.2
Wash away surface dirt and grime with a mild dish detergent and rinse
away.
Moisten a soft cloth with water to rub away any remaining dirt.
Rinse thoroughly with clean water.
SAFETY
For joystick maintenance guidelines refer to the device’s user manual.

5
Warranty 7.0
Our products are designed, manufactured, and produced to the highest of
standards. If any defect in material or workmanship is found, Stealth Products
will repair or replace the product at our discretion. Any implied warranty,
including the implied warranties of merchantability and fitness for a particular
purpose, shall not extend beyond the duration of this warranty. Stealth
Products, LLC does not warrant damage due to, but not limited to:
Misuse, abuse, or misapplicaon of products.
Modicaon of product without wrien approval from Stealth Products, LLC.
Any alteraon or lack of serial number, where applicable, will automacally void
this warranty.
Stealth Products, LLC is liable for replacement parts only.
Stealth Products, LLC is not liable for any incurred labor costs.
No person is authorized to alter, extend, or waive the warranties of Stealth
Products, LLC.
Stealth Products warrants against failure due to defective materials
or workmanship:
Covers: 2 years
Hardware: 5 years
Electronics: 3 years
In Case of Product Failure
In the event of product failure covered by our warranty, please follow the
procedures outlined below:
1. Call Stealth at [phone] or toll free [phone].
2. Request the Returns Department or obtain an RA from the Returns Department and follow
department or documentaon instrucons.

6
NOTES 8.0

7
NOTES 8.0

Stealth Products, LLC. • [e-mail] • www.stealthproducts.com
[phone] | [phone] | 104 John Kelly Drive, Burnet TX 78611
P120D198 Revision Date 2019-12-17