Stealth Products TFB User manual

Backs &
Support
TFB
Simple Solutions Fixed Hardware
Owner’s Manual - Maintenance Guide
True Forming Back -Simple Solutions Stability Hardware
tooltip

1
Table of Contents
Customer Satisfaction ................................................................................ i
Important Information..........................................................................ii-iii
Warranty.................................................................................................................. ii
Supplier Reference .............................................................................................. ii
Warning Labels .................................................................................................... iii
Limited Liability.................................................................................................... iii
Testing..................................................................................................................... iii
Design and Function .................................................................................. 1
Intended Use .........................................................................................................1
Parts Breakdown...................................................................................................1
Installation Instructions .........................................................................2-5
Preparations...........................................................................................................2
Installation Plan ....................................................................................................2
Required Tools ......................................................................................................2
Mounting the Hardware to the Back Shell.................................................3
Mounting the Hardware to the Back Posts................................................4
Mounting the J&L Hardware...........................................................................5
Operating Instructions ...........................................................................6-8
Depth Adjustment ...............................................................................................6
Width Adjustment ...............................................................................................7
Angle Adjustment................................................................................................8
First Time Use ............................................................................................. 9
Dealer Assistance.................................................................................................9
User Testing............................................................................................................9
Conditions of Use ................................................................................................9
Maintenance ............................................................................................. 10
Cleaning................................................................................................................ 10
Disinfection ......................................................................................................... 10
Maintenance ....................................................................................................... 10

i
Customer Satisfaction
Stealth Products is committed to 100% customer satisfaction. Your complete
satisfaction is important to us. Please contact us with feedback or suggestions to
help us improve the quality and usability of our products.
You may reach us at:
General
Read and understand all instructions prior to the use of this product. Failure to
adhere to instructions and warnings in this document may result in property
damage, injury, or death. Product misuse or failure to follow instructions will void
the warranty.
Immediately discontinue use if any function is compromised, if parts are missing
or loose, or if any component shows signs of excessive wear. Consult with your
supplier for repair, adjustment, or replacement.
All persons responsible for tting, adjustment, and daily use of the devices
discussed in these instructions must be familiar with and understand all
instructions and warnings, and maintain our products according to our instructions
on care and maintenance. The installation instructions will guide you through this
products' options and possibilities.
Instructions are written with the expressed intent of use with standard
congurations.
They also contain important safety and maintenance information,
as well as describe possible problems that can arise during use. For further
assistance, or more advanced applications, please contact your supplier or
Stealth Products at [phone] or toll free at [phone].
Always keep the operating instructions in a safe place so they may be referenced
as necessary.
All information, pictures, illustrations, and specications are based on the product
information that was available at the time of printing. Pictures and illustrations
shown in these instructions are representative examples and are not intended to
be exact descriptions of the various parts of the product.
Stealth Products, LLC
104 John Kelly Drive
Burnet, TX 78611
Phone: [phone] Toll Free: [phone]
Fax: [phone] Toll Free: [phone]
[email protected]
www.stealthproducts.com
MDSS GmbH
Schigraben 41
30175 Hannover, Germany

ii
Important Information
These products are designed to be tted, applied, and installed exclusively by
a healthcare professional trained for these purposes. The tting, application,
and installation by a non-qualied individual could result in serious injury.
CAUTION
Warranty
Our products are designed, manufactured, and produced to the highest of
standards. If any defect in material and workmanship is found, Stealth Products
will repair or replace the product at our discretion. Any implied warranty, including
the implied warranties of merchantability and tness for a particular purpose, shall
not extend beyond the duration of this warranty. Stealth Products does not
warrant damage due to, but not limited to: misuse, abuse, or misapplication
of product, and/or modication of product without written approval from
Stealth Products, LLC. Any alteration or lack of serial number, where applicable,
will automatically void all warranty.
Stealth Products, LLC is liable for replacement parts only. Stealth Products, LLC
is not liable for any incurred labor costs.
Stealth Products warrants against failure due to defective materials or
workmanship:
Covers: 2 years
Hardware: 5 years
Electronics: 3 years
In the event of a product failure covered by our warranty, please follow the
procedures outlined below:
Call Stealth Products at [phone] or toll free at [phone].
Request a Return Authorization (RA) form from the Returns Department and follow
the documentation instructions.
You can download additional copies of this manual by accessing the Stealth
website (https://stlpro.site/stealth-docs) and searching "P136D687" in the search
bar at the top of the page.
Supplier Reference
Supplier:
Telephone:
Address:
Purchase Date:
Model:

iii
Important Information
Warning Labels
Warnings are included for the safety of the user, client, operator, and property.
Please read and understand what the signal words DANGER,WARNING,
CAUTION,NOTICE, and SAFETY mean, and how they could aect the user, those
around the user, and property.
Limited Liability
Stealth Products, LLC accepts no liability for personal injury or damage to
property that may arise from the failure of the user or other persons to follow the
recommendations, warnings, and instructions in this manual.
Stealth Products does not hold responsibility for nal integration of nal assembly
of product to end user. Stealth Products is not liable for user death or injury.
Testing
Initial setup and driving should be done in an open area free of obstacles until the
user is fully capable of driving safely.
CAUTION
Identies a potential situation which, if not avoided,
may result in minor to moderate injury
and property damage.
WARNING Identies a potential situation which, if not avoided,
may result in severe injury,death, and property damage.
DANGER Identies an imminent situation which, if not avoided, may
result in severe injury,death, and property damage.
NOTICE Identies important information not related
to injury, but possible property damage.
SAFETY
Indicates steps or instructions for safe practices,
reminders of safe procedures, or important
safety equipment that may be necessary.

tooltip
tooltip
1
Design and Function
Intended Use
The Simple Solutions Fixed hardware is intended to provide a versatile mounting
solution for end users who require a xed mounting hardware for the True Forming
Back (TFB) family. The hardware features isolated depth and angle adjustments
that provide trouble-free adjustability.
Parts Breakdown
Item ID Part Number Description Qty.
A1 BKT24 (45°)
BKT28 (90°) Bracket, Depth Adjustable Back 1
A2 BKT22 Bracket, Boss Plate 1
A3 BKT23 Bracket, Nut Plate 1
A4 M6 SSW 0.5 OD x .266 ID x .250 Thick Washer, Black Oxide 3
A5 M6x1x16MM BHS M6x1x16mm Button Head Screw 2
A6 M6x1.0x16 FHS M6x1x16mm Flat Head Screw 1
A7 TFB200-88 Single Hole T-Nut Metric 2
A8 M6x1.0x20MM BHS M6x1x20mm Button Head Screw 1
B1 M6x1x20MM SHS M6x1x20mm Socket Head Screw 2
B2 M6 SSW 0.5 OD x .266 ID x .250 Thick Washer, Black Oxide 2
B3 BKT21 Bracket, Back Angle Mount 1
C1 CLP02 Inside Clamp 1
C2 BR5002 Quick Release Seat Back - Outside Clamp 1
C3 BR5034 Backing Pin 1
C4 M5x0.8x25MM SHS M5x0.8x25MM Socket Head Screw 2
C5 M5 FW M5 Flat Washer, A2 S/S, Black Oxide
(5.3mm ID x 10mm) 2
C6 M6x1.0x16MM FHS M6x1.0x16MM Flat Head Screw 2
tooltip
C1 C2
C3
C6 C5
C4
B3
A3
A2
A4
A4
A5
A8
A7
A6
C. Back-Post Clamp
B. Angle Adjustment Plate
A. Mounting Bracket
A1
45° bracket shown.
NOTICE Refer to the manual that came with your back shell
for more specic installation information.
B2
B1

A. J & L Hardware
(4-point only)
2
Installation Instructions
Installation Plan
Set up an installation plan before beginning the installation. This plan should take
into account:
• Where the Simple Solutions Fixed hardware will be placed and how it
will be adjusted.
• Sucient clearance for other hardware, such as wings or laterals that may
be required.
Required Tools
Use the proper tools to install and adjust the Simple Solutions Fixed hardware to
the desired position for the user.
The tools needed to install the Simple Solutions Fixed hardware are as follows:
Hardware Description
4mm Hex Key Flat and Button Head Screws
10mm Combo
Wrench
4-point installation,
Nylon Lock Nuts
Preparations
Only a qualied service technician may install the Simple Solutions Fixed
hardware.
WARNING
An incorrect installation of the Simple Solutions Fixed
hardware and/or its accessories can cause
damage to the hardware and/or injury to the user.
CAUTION
The use of improper tools may cause damage to the device.
Any connection must always be secured with all delivered
screws. Use only the screws included in the package.
Item ID Part Number Description Qty.
D1 SSS200-36 1" Hold Down Drop Stop Weldment 1
D2 SSS200-152 1 IN 7 Hole J-Hook 1
D3 SSS200-153 Double Slot Adjustable L-Bracket 1
D4 67582247 5/16 4 10 Internal Tooth H-Lock Washer 1
D5 TFB200-88 Single Hole T-Nut Metric 2
D6 M6x1x14.3MM RBW M6x1mm Thread, 14.3mm Barrel Height
Round Base - Base Weld Nut. 1
D7 M6x1x35MM BHS M6 x 1 x 35MM Button Head Screw 1
D8 M6x1x16MM BHS M6 x 1 x 16MM Button Head Screw 4
D9 M6 SSW 0.5 OD x .266 ID x .250 Thick Washer, Black Oxide 2
D10 M6x1.0 NLN M6 - 1.0 Nylon Lock Nuts, Low Prole, 18-8 S/S, BI 2
D11 BR2020 2IN x 1IN OD x .875IN ID Reducer 2
D2
D7
D10
D11
D7
D4
D1
D6
D5
D8
D3
D9
D8

tooltip
tooltip
3
Installation Instructions
Mounting the Hardware to the Back Shell
NOTICE
Altering the hardware in any way
and/or improper installation
will void the warranty.
Step One: Place M6x1x16mm Button
Head Screws (A5) and M6 Washers (A4) in
the top and bottom slot of the Mounting
Bracket (A)*.
* Bracket shown without hardware for clarity. 90° Bracket shown; 45°
may be used. Both will follow the same directions.
Step Two: Insert the screws
and the mounting bracket
into one of the mounting
slots on the back shell.
Step Three: Thread a Single
Hole T-Nut (A7) onto each
screw. Make sure the grooves
in the T-nut line up with the
edges of the slot. Lightly snug
the screw to hold the
mounting bracket in place.
Step Four: The J & L mounting brackets follow the same procedure to install on
the lower portion of the back shell in 4-point installations. Align the mounting
brackets with the slots in the back shell and lightly snug the M6x1x16mm Button
Head Screws (A5) to hold the mounting brackets in position.

tooltip
tooltip
tooltip
1"
tooltip
3/4"
tooltip
7/8"
4
Installation Instructions
Mounting the Hardware to the Back Posts
Step One: Loosen the
M5x0.8x25mm Socket Head
Screws (C4) on the Back Post
Clamps.
The Back Post Clamp
can be simply installed
on 3/4", 7/8" and 1"
back posts.
Step Two: Place the hardware in
position so the back posts are
located between the Inside Clamp
(C1) and the Outside Clamp (C2).
Step Three: Position the back post
clamps at the proper height on the
back post and tighten the
M5x0.8x25mm Socket Head Screws
to secure the mounting hardware
to the back posts.
SAFETY
Always check all mounting hardware,
making sure each fastener is tightened properly
before using the back support.

tooltip
tooltip
tooltip
5
Installation Instructions
A
D
E
B
Mounting the J & L Hardware
Step One: For one inch canes, the Hold Down
Drop Stop Weldment (B) can be placed directly on
the cane. For 7/8" tubing, place the BR2020
Reducer and then the Weldment (B). Position it in
the proper vertical position on the cane and secure
with the M6 x 1 x 35mm Button Head Screw (C),
5/16" 4 10 Internal Tooth H-Lock Washer (D) and
M6 x 1 x 14.3mm Round Base - Weld Nut (E).
Step Two: To adjust the mounting hardware
for depth, remove the two M6 x 1 x 16mm
Button Head Screws (F) and M6 x 1 Nylon
Lock Nuts (G) holding the 1 IN 7 Hole J-Hook
(H) from the Double Slot Adjustable L-Bracket
(J). Adjust the bracket to the desired holes
and reinstall the screws to secure it in place.
4-point installations require the J & L hardware in the lower position. Depending
on the back shell installed, you will use a 45° or 90° bracket* to mount this
hardware to the back shell. (J & L is not included with 2-point or HD installations.)
F
H
G
J
C
Step Three: To adjust for height, the
weldment can be loosened and
matched to the rest of the 4-point
hardware using #1 - #5 as shown in
the image to the right..
1
5
3
2
4
* 90° bracket shown

tooltip
6
Operating Instructions
Adjustments
Depth Adjustment
Note: The Angle Adjustment Plate has two mounting positions, 2" (51mm) apart.
This allows a total of 4.5" (115mm) of total depth adjustment.
Step One: Loosen the
M6x1x16mm Flat Head Screw
(A6), the M6x1x20mm Button
Head Screw (A8) on the
mounting brackets.
(Note: The Flat Head Screw is loosened through
the opening in the bracket.)
Step Two: Slide the back shell forward or backward to the desired depth.
(Note: L-Brackets can be reversed to allow for more or less depth
adjustment. This change aects width adjustability in a similar manner.)
Step Three: Secure the back in the new position by
tightening the M6x1x16mm Flat Head Screw (A6), the
M6x1x20mm Button Head Screw (A8).

7
Operating Instructions
tooltip
tooltip
Width Adjustment
Step One: Loosen the
M6x1x16mm Button
Head Screws (A5) on
both left and right
mounting brackets (A1).
Step Two:
Position the
mounting
brackets (A1)
at the desired
width.
Step Three: Secure the
mounting brackets (A1)
by tightening the two
M6x1x16mm Button
Head Screws (A5).
(Note: L-Brackets can be reversed to allow for more or less width
adjustability. This change will aect depth adjustability similarly.)

8
Operating Instructions
tooltip
tooltip
Angle Adjustment
Step One: Loosen the two
M6x1x20mm Socket Head
Screws (B1) on both left and
right mounting brackets.
Step Two: The angle plate
allows for 22.5° of adjustment
in either direction. Tilt the back
shell to the desired angle.
Step Three: Tighten the
M6x1x20mm Socket Head
Screws (B1) to secure the
back at the new angle.
45°
Simple Solutions Fixed mounting hardware allows the back shell to pivot
22.5° up or down.

9
First Time Use
Dealer Assistance
During rst-time use by the client, it is advised that the dealer or service technician
assists and explains the set-up to the customer (the user and/or the attendant). If
needed, the dealer may make nal adjustments.
User Testing
It is important that the customer is fully aware of the installation, how to use it, and
what can be adjusted in order to gain as much mobility as possible. As a dealer,
proceed as follows:
              

Have the user test the position of the Simple Solutions Fixed Hardware.
Is the hardware in the proper position for the client?
          
        
Explain to the customer possible problems and how to address them.
Conditions of Use
The Simple Solutions Fixed hardware is intended for use as installed by the
dealer, in accordance with the installation instructions in this manual.
              
       
             
          

10
Maintenance
Cleaning
        
            

               
Disinfection
          
      
Maintenance
These care and guideline instructions will keep the hardware and covers in good
condition for a longer period of time and prevent damage.
              
      
             
WARNING
Maximum Weight Capacity:
2- and 4-point: 300 lbs.
4-point Heavy Duty: 600 lbs.

Stealth Products, LLC · [email protected] · www.stealthproducts.com
[phone] | [phone] | 104 John Kelly Drive, Burnet, TX 78611
      
© 2022, Stealth Products, LLC
WarrantyInformation HomePage Online UserManual