Stealth Tronic SC7008 User manual

WWW.STEALTHTRONIC.COM [email protected] CALL: [phone]
USER MANUAL: UltraLife camera in a Air Freshener
UltraLife series is especially praccal for long term surveillance devices. This module is equipped with low PIR sen-
sor that allows you to monitor places with low acvity movements for a long period of me.
The module is placed manually to the covert PIR module, which makes it virtually unrecognizable from the real PIR
sensor.

WWW.STEALTHTRONIC.COM [email protected] CALL: [phone]
PACKAGE CONTAINS:
 1x Stronic UltraLife
 1x Remote control
 1x AV out Cable
 1x Charging cable
 1x USB Charger
ON/OFF
Turn on VIDEO RECORDING
Playback
Ok buon
DOWN
Turn on PIR DETECTION (For max baery
life)
UP
MENU
Moon detecon
Take a
picture
ON/OFF
Camera

WWW.STEALTHTRONIC.COM [email protected] CALL: [phone]
QUICK SET-UP GUIDE:
 You have to set the me manually on your SD card with Notepad If you don’t have a external AV display
 It comes standardly in PIR mode detecon preset and HD resoluon
 To access OSD menu you have to connect AV cable (resoluon, me, length of recordings )
 You also need external display to access the OSD menu
 By pressing PIR buon you will enter STAND BY mode (you can make pictures etc. with remote)
 Baery charging can take up to 12 hours
IMPORTANT:
STEP 1
SETTING UP
1. Place in SD Card —> Turn On —> MODULE IS IN PIR MODE
2. You can deacvate the PIR Mode by pressing PIR buon —> YOU WILL ENTER STANDBY
STEP 2
Connecting to OSD menu
1. Connect with AV cable
2. Press MENU and navigate through the menu with Remote
STEP 3
Mounting
1. Place the camera in your designated spot, charging baery can take up to 12 hours.

WWW.STEALTHTRONIC.COM [email protected] CALL: [phone]
DIODE SIGNALS
DIODE FUNCTION
GREEN light Stand-by
1X FLASH RED Taking picture
4X FLASH RED Not charged / shutting down
3sec RED + 2sec GREEN Turning on
3x FLASH GREEN Continous recording
2x FLASH GREEN + 4x FLASH RED+ 2sec RED+ 3x
FLASH RED Recording in PIR activation (best battery)
3x RED AND GREEN FLASHING Motion Detection (worse battery)
GREEN FLASHING SD Card is not inserted
TIME SETTING
1. Create a .txt le called “me.txt”
2. Place in current date and me in following format: RRRR.MM.DD HH:MM:SS
3. Put on the SD Card in the core directory.

WWW.STEALTHTRONIC.COM [email protected] CALL: [phone]
If baery is fully discharged, charging will start 3 min aer connecng the device into power supply.
We recommend to format baery before you start using the device. Charge the device at least 6hours and
then let it discharged. Repeat three mes. Aer device will be fully formaed, charge it for 5 hours,
ideally.
Record a sample video, to test the device under various light condions.
USEFUL INFORMATION
DISCLAIMER
This user manual can be slightly dierent from specic product.
Before start using the device, check with your local legal condions. Neither supplier nor distributor assume
responsibility for using device in conict with local law.