Reolink RLC-820A User manual

RLC-820A
Reolink RLC-820A is equipped with on-device detection technology to discern
people, vehicles, and pets* from other objects. With its accurate detection, you can
keep a sharper eye on the true threats and release your mind from the
bombardment of unnecessary notifications.
1. Specs
1
Mount
2
Metal Aluminum Case
3
High Definition Lens
4
18 IR LEDs
5
Daylight Sensor
6
Built-in Mic

1
Micro SD Card Slot
1
Power
2
Reset Button
3
Network
4
Waterproof Lid

2. Setup and Install
Set up the Camera
What’s in the Box
Note: The package content may vary and update with different version and
platforms, please take the below information only for a reference. And the actual
package content are subject to the latest information on the product selling page.
RLC-820A
Set up the Camera on the App
Here is a guide on how to initially set up the camera via Reolink App.
Step 1. Tap the icon in the top right corner.
Surveillance Sticker*1
Pack of Screws*1
Mounting Template *1
RLC-820A*1
Quick Start Guide*1
1m Network
Cable*1
Waterproof Lid *1

Note: If you've enabled the Add Device Automatically option on the App's
Settings page, you can tap this device on the Devices page and turn to Step
3directly.
Step 2. Scan the QR code on the back of the camera. You may tap Light to enable
a flashlight when setting up the camera in a dark environment.
If the phone doesn't respond, please tap Input UID/IP and then manually type in
the UID (16-digit characters under the QR code of the camera). Then tap Next.

Step 3. Create a login password for your camera. Then tap Next.
Step 4. Name your camera. Then tap Next.
Step 5. Initialization finished! You can start live viewing now.

Install the Camera
Please follow the steps below to install the camera.
Step 1. Separate the mounting plate from the camera.
You may hold and press on the camera top and turn the plate counterclockwise as
shown below.
Step 2. Install the mounting plate.
Drill holes on the ceiling according to the mounting hole template and screw the
mounting plate firmly.

Note: Use the drywall anchors included in the package if needed.
Step 3. Attach the camera.
Align the camera to the mounting plate and turn the camera clockwise to lock it
tightly. Pay attention that these two points should be aligned, which means the
camera has been locked correctly.
Notes:
Run the cable through the cable notch on the mount base.
If you need to take down the camera, please hold and rotate the camera
counterclockwise carefully.
Step 4. Adjust the camera's view angle.
Once the camera is installed, you may rotate the camera body manually to adjust
the camera’s surveillance angle.