TBK vision TBK-6008CSV9 User manual

Vari-Focal Camera
Instruction Manual
VER.:1.0, P/N.:040060A

1
Thank you very much for purchasing our product. Before operating this
product, please read this instruction manual carefully to ensure proper use.
1. Safety Precautious
CAUTION
RISK OF ELECTRIC
SHOCK. DO NOT OPEN!
CAUTION : TO REDUCE THE RISK OF ELECTRIC
A
L SHOCK, DO NOT OPEN CO
V
ERS.
NO USER SER
V
ICE
A
BLE P
A
RTS INSIDE. REFER SER
V
ICING TO QU
A
LIFIED
SER
V
ICE PERSONNEL.
Disposal of Old Electrical & Electronic Equipment (Applicable in
the European Union and other European countries with separate
collection systems).
Please do not directly touch the sensor element. If necessary, use
a soft cloth moistened with alcohol to wipe off any dust.
Please be extra careful not to shake the camera.
Please avoid places where there is direct sunlight
When using this camera in places where the lighting differs greatly,
please use a manual iris lens with a ND filter.
Please avoid places where temperatures exceed 50℃or more, high
humidity and/ or direct rainfall, frequent vibrations, or shocks occur.
During the night, if a minimum brightness of 0.1 Lux cannot be
achieved, install appropriate light fixtures.
When the camera is not used, keep the lens or the lens cap
attached to protect the sensor.
2. Description
The camera uses SONY high sensitive super HAD interline transfer
image sensor, and employs digital signal processor (DSP) chip-set for
image control, and all integrated state circuitry which provide
extremely long life and high reliability. This camera offers excellent
image quality with low lag and high burn resistance, and is not subject
to distortions from magnetic fields.
Highly resistance to shock and vibration, easy to install, this camera is
a very good choice for your color CCTV system.

2
3. Feature
Camera with SONY Super HAD CCD sensor in metal case.
Pixel number: NTSC=380K/ PAL=440K (EIA=380K/ CCIR=440K) for
high resolution models, and NTSC=270K/ PAL=320K (EIA=270K/
CCIR=320K) for normal resolution models.
High anti-blooming and low smear.
Powerful functions: Auto Electronic Shutter (AES), Auto Gain
Control (AGC), Back Light Compensation (BLC), Auto White
Balance (AWB), Auto Iris (AI), and Digital Signal Processor (DSP).
Optional audio function.
Low power consumption, economical, and aesthetic.
4. Name of Each Part
Fig. 1
TELE
Adujustment
6Focal
Fig 1 Side View
Mounting Bracket 7
4
Cover
WIDE
5Mounting Bracket 7
Fig. 1

3
Note: AGC & FL function is invalid to BW cameras.
Fig. 3
Fig. 2

4
5. Installation & Operation
Please refer to Fig. 1, Fig. 2, or Fig. 3 (Pg2 & Pg3) and setup guide
below:
1. Connect the video output (1) to the monitor or other video device
through a 75 ohms type coaxial cable.
2. Connect the power source (2) with either an AC power adapter
or a DC jack (+12V DC is in the jack center), then the LED
indicator (3) will light.
3. Once the picture appears on the monitor, open the cover (4)
adjust the lens wrench of “WIDE←→TELE” (5) to get the view
angle that you desire, then adjust the focus wrench (6) of the
lens to obtain the best picture.
4. Tighten this two wrench(5, 6) both, then put the cover (4) back.
5. Mount the camera on the mounting bracket by using the hole (7)
on the top or bottom of the camera or using the enclosed 8mm
mounting block (2 screws included).
6. DIP Switch (8) Setting
•BLC FUNCTION
Set switch-OFF/BLC to BLC to enable back light compensation
(BLC) function.
•AUTO IRIS FUNCTION
When using an auto iris lens, the switch-AES/OFF should be
in the OFF position to disable the AES function.
7. Adjust the LEVEL with the VR (9) to proper level.
8. Optional audio function (10).

5
6. Specification
Color Camera
Image Device 1/3“ Color SONY
Super HAD
1/3“ Color SONY
Hi-Res. Super HAD
Picture Elements NTSC: 510x492
PAL: 500x582
NTSC: 768x494
PAL: 752x582
Resolution 380 TVL 470 TVL
Min. Illumination 0.2 Lux/ F2.0 0.3 Lux/ F2.0
S/N Ratio More than 48 dB
Electronic Shutter EIA:1/60s~1/100,000s; CCIR:1/50s~1/100,000s
Flickerless Mode On/ Off
Iris Control DC Drive
Gamma 0.45
Lens Furnished
Vari-Focal f =3.7~12.0mm/ F=1.6~360 (Wide:H71.6°×V55.8°, Tele:H23.8°×V17.9°)
Vari-Focal f =9.0~22.0mm/ F=2.0~360 (Wide:H29.2°×V21.7°, Tele:H13.0°×V9.7°)
Vari-Focal with ICR f3.7~12.0mm/ F=1.6~360 (Wide:H71.6°×V55.8°, Tele:H23.8°×V17.9°)
White Balance Auto
Gain Control Auto
Sync. System Internal
Back Light Comp. On/ Off
Audio Output 2 Vp-p/ 50 Ohms. (optional)
Video Output 1 Vp-p/ 75 Ohms
Power Supply AC24V, AC110V, AC100~240V, DC12V/ AC24V Dual (optional)
Power consumption AC/ 2.2W max. AC/ 2.4W max.
Operating Temp. -10 to 50℃(14 to 122℉)

6
BW Camera
Image Device 1/3“ BW SONY
Super HAD
1/3“ BW SONY
Hi-Res. Super HAD
Picture Elements NTSC: 510x492
PAL: 500x582
NTSC: 768x494
PAL: 752x582
Resolution 420 TVL 600 TVL
Min. Illumination 0.1 Lux/ F2.0 0.2 Lux/ F2.0
S/N Ratio More than 48 dB
Electronic Shutter EIA:1/60s~1/100,000s; CCIR:1/50s~1/100,000s
Iris Control DC Drive
Gamma 0.45
Lens Furnished
Vari-Focal f =3.7~12.0mm/ F=1.6~360 (Wide:H71.6°×V55.8°, Tele:H23.8°×V17.9°)
Vari-Focal f =9.0~22.0mm/ F=2.0~360 (Wide:H29.2°×V21.7°, Tele:H13.0°×V9.7°)
Vari-Focal with ICR f3.7~12.0mm/ F=1.6~360 (Wide:H71.6°×V55.8°, Tele:H23.8°×V17.9°)
Gain Control Auto
Sync. System Internal
Back Light Comp. On/ Off
Audio Output 2 Vp-p/ 50 Ohms. (optional)
Video Output 1 Vp-p/ 75 Ohms
Power Supply AC24V, AC110V, AC100~240V, DC12V/ AC24V Dual (optional)
Power consumption AC/ 1.9W max. DC/ 2.2W max.
Operating Temp. -10 to 50℃(14 to 122℉)
(Note: Design and specifications are subject to change without prior notice.)