STEELE PRODUCTS SP-PM2OYSUC User manual

Owner's Menue!
SP-PM2OYSUC
Ij_ WARNING!ToReduceTheRiskOfInjury,User 1
_d hstructio_Maoual.
FORS£_ICE CALL:Q@@ @aE E@0t
PARA SERVICID LLAME: _-LJ_--_ A

Owner's Manual
PRODUCT SPECIFICATION
Component
BatteryCapacity
ChargeTime
No-loadSpeed
CuttinqPath
HeiqhtAdjustment
WheelsSize
UnitWeiqht
Specifications
24 Vd.c.
12-hour
3,500/min
20 in. (508 mm)
1-3/4-3-1/4 in. ( 45mm - 82.55mm)
7 in. (front)/9-1/2 in. (rear)
97 Ib (44 kg) with battery
641b(29kg) without battery
SYMBOL
SYMBOL NAME SYMBOL NAME
_ Servingoftoesor fingers-rotary _ Thrownobjectsfrom mowerdeCk.mowerblade.
Keepbystanders/childrenaway. Safetyalert.
Slip on slope.
CPSCDanger label.
Readtheoperator'smanual.
/_ PleaseReadAnd Understand This entire manual beforeattempting to assemble,operateor installthe
product. Thesesafety instructions are not meantto cover everypossible condition that could occur.

Owner's Hanua!
SAFETYINSTRUCTIONS
_, WARNING:Readall instructions when using electric gardening appliances.Basicsafety
precautions should always befollowed to reducethe risk of fire, electric shock, and personal injury.
FORALL LAWNMOWERS
a) Avoid DangerousEnvironment
Don't useappliances in damp or wet locations.
b) Don't Usein Rain.
c) KeepChildren Away
All bystanders (visitors) should be kept at a safe distancefrom work area.
d) DressProperly
Do not wear loose clothing or jewelry. Theycan becaught in moving parts. Useof rubber gloves and
substantial footwear is recommendedwhen working outdoors.
Wear protective haircovering to contain long hair.
e) Usesafetyglasses
Always useface or dust mask if operation is dusty.
f) Useright appliance
Do not use appliancefor anyjob exceptthatfor which it is intended.
g) Don'tforce appliance
Itwill dothe job betterand safer atthe rate for which it wasdesigned.
h) Don't overreach
Keepproper footing and balanceat all times.
i) Stay alert
Watch what you are doing. Use common sense.Do not operateappliance when you aretired.
j) Store idle appliances indoors
When not in use, appliancesshould bestored indoors in dry,and high or locked-up place-out of reach
of children.
k) Maintain appliancewith care
Keepcutting edgesharp and clean for bestand safestperformance andto reducethe risk of injury.
Follow instructions for lubricating and changingaccessories. Keephandlesdry, clean,andfree from
oil andgrease.
J)Checkdamaged parts
Beforefurther useof the appliance, aguard or other partthat is damagedshould becarefully checked
to determine that it will operate properly and perform its intended function. Checkfor alignment of
moving parts, binding of moving parts, breakageof parts, mounting, and anyother condition that may
affect its operation.A guard or other part that is damagedshould beproperly repairedor replacedby
an authorized servicecenter unless indicated elsewhere in this manual.
m) Keepguards in place and in workingorder.
n) Keepblades sharp.
o) Keephandsand feet awayfrom cuttingarea.
p) Objects struckbythe lawn mowerblade cancausesevere injuries to persons.
The lawnshouldalways he carefully examined and clearedof aJJobjectspriorto each mowing.
q) if lawn mowerstrikesaforeign object, follow thesesteps:
i) Stop lawn mower. Removethe safety key.
ii) Inspectfor damage.
iii) Repairany damage before restarting and operating the lawn mower
r) Useidentical replacementblades only.

Owner's Manual
SAFETYINSTRUCTIONS
SAFETYINSTRUCTIONSFORBATTERY-OPERATEDLAWNMOWERS
a) Do not charge lawnmower in rain, or in wet locations.
b) Do not use battery-operated lawn mower in rain.
c) Removeor disconnectsafetykeybeforeservicing,cleaning,or removingmaterialfrom the lawnmower.
d) Useonly the following type andsize battery:type A22DD1,A22D02 leadacid battery
e) Do not dispose of the battery in a fire. The cell may explode. Checkwith local codesfor possible
special disposal instructions.
f) Donot open or mutilate the battery. Releasedelectrolyteis corrosiveand may cause damageto the
eyesor skin. It may betoxic if swallowed.
g) Exercisecare in handling batteriesin order not to short the batterywith conducting materials such
as rings, bracelets,and keys.The battery or conductor may overheat and causeburns.
CAUTION
Theelectrolyte isa dilute sulfuric acidthat is harmfulto the skin and eyes. Itiselectrically conductive
andcorrosive. Thefollowing procedures should beobserved:
a) Wearfull eye protection and protective clothing.
b) If electrolyte contacts the skin, wash it off immediatelywith water.
c) Ifelectrolytecontactsthe eyes,flush thoroughly and immediatelywith water. Seekmedicalattention.
SAFETYiNSTRUCTIONSFORWALK-BEHINDMOWERS
I. GENERALOPERATION
1. Read, understand, andfollow all instructions onthe machine and in the manual (s) before starting.
2. Do not put hands or feetnear or underthe machine.Keepclear ofthe dischargeopeningat all times.
3. Onlyallow responsible adults, who arefamiliar with the instructions,to operatethis machine.
4. Clearthe area of objects such as rocks, wire, toys, etc., which could bethrown bythe blade.
Stay behind the handlewhen the motor isrunning.
5. Besure the area isclear of bystanders beforeoperating. Stop machine ifanyoneenters the area.
6. Do not operate machine barefooted or while wearing sandals.Always wearsubstantial footwear.
7. Do not pull machine backward unless absolutely necessary.Always look down and behind before
andwhile moving backward.
8. Neverdirectdischargedmaterialtowardanyone.Avoiddischargingmaterialagainstawallor obstruction.
Material may ricochet backtoward the operator. Stopthe bladewhen crossing gravel surfaces.
9. Do not operatemachine without the entire grasscatcher, dischargeguard, rearguard,or other safety
protective devicesin placeand working.
10. Never leavea running machine unattended.
11. Stopthe motor, removethe safetykeyand wait until the bladecomes to a completestop before
cleaning the machine, removing grass catcher, or unclogging the discharge guard.
12. Operatemachine only in daylight or good artificial light.
13. Do not operate machine while underthe influence of alcohol or drugs.
14. Neveroperate mower in wetgrass. Always besure of your footing; walk; never run.
15. Disengagethe drive system, if soequipped, beforestarting the motor.
16. Ifthe machineshould startto vibrate abnormally, stop the engine (motor) andcheckfor the cause
immediately.Vibration is generallyawarning of trouble.
17. Always wear eye protection when operating machine.
18. Seemanufacturer's instructions for proper operationand installation of accessories.
Only useaccessoriesapprovedby the manufacturer.

Owner's Manual
SAFETYINSTRUCTIONS
IJ. SLOPEOPERATION
Slopesare amajor factor relatedto slip and fall accidents, which can result in severeinjury.
Operation on aii slopes requires extra caution, if you feel uneasyon aslope, do not mow it.
1. Mow acrossthe face of slopes; neverup and down. Exerciseextreme caution when changing
direction on slopes.
2. Watch for holes, ruts, bumps, rocks, or other hidden objects. Uneventerrain could causea slip and
fail accident. Tall grasscan hide obstacles.
3. Do not mow on wet grassor excessivelysteepslopes.Poorfooting could causea slipand fall accident.
4. Do not mow near drop-offs, ditches, or embankments.You could loseyour footing or balance.
Ill. CHILDREN
Tragic accidents can occur if the operator is not alert to the presenceof children.
Children areoften attracted to the machine and the mowing activity.
Never assumethat children will remain where you last saw them.
1. Keepchildren out of the mowing area and underthe watchful care of aresponsible adult other than
the operator.
2. Bealert and turn mower off if a child entersthe area.
3. Neverallow children to operatethe machine.
4. Use extra carewhen approaching blind corners, shrubs, trees, or other objects that may blockyour
view ofa child.
IV. SERVICE
GENERALSERVICE
1. Keepall nuts and bolts tight to be surethe equipment is in safeworking condition.
2. Nevertamper with safety devices.Checktheir proper operation regularly.
3. Keepmachinefree of grass, leaves,or other debris build-up.
4. If you strike aforeign object, stop, removethe safetykey and inspectthe machine.
Repair,if necessary,beforestarting.
5. Nevermakeanyadjustments or repairs with the motor running.
6. Checkgrasscatcher components and the discharge guardfrequently and replacewith
manufacturer's recommended parts, when necessary.
7. Mower bladesaresharp. Wrap the bladeor wear gloves,and useextracautionwhen servicingthem.
8. Maintain or replacesafetyand instruction labels, asnecessary.

Owner's Manual
BATTERY& CHARGER
CAUTION:USEONLYAPPROVEDREPLACEMENTBATTERIES,OTHERBATTERIESMAYCAUSE
INJURYOR DAMAGETOTHE MOWER.
The batterythat is supplied withthis mower is a maintenance-free,sealed,24 Vstorage battery,it can
betipped without dangerof acid spillage. Thechargerwill requireapproximately 12 hours to recharge
afully discharged battery.
BATTERYSAFETYRULES
1. Allow at least 12 hours of batterycharging before using the mower for the first time.
2. For optimal performance, chargethe batteryeverytwo months, evenwhen it is not in use.
3. Chargethe battery in acool, dry place.
4. The batterydoes not haveto befully discharged beforerecharging. This batterywill not developa
memory.
5.2 to 3 initial charging/discharging cycles may be required in order to reachthe maximum runtime
/capacity.
6. Do not store battery intemperatures lower than 32° F(0° C)
PROPERCAREFORBATTERY
Off-Seasonstorage
In orderto ensureoptimal performance, it is recommendedthat the battery becharged everytwo
months when not inuse.
Ifall ofthe following conditions are met,the mower can be stored with the charger disconnected.
1. The mower is fully charged beforestoring.
2. Theaveragetemperature of the storage location is below 50° F (10° C).
3. The battery should not be stored for more than 6 months.
CHARGERSAFETYRULES
Chargethe mower battery ina dry areathat isprotectedfrom the weather. Do not exposethe mower
or the charger to rain. Do not chargethe battery in a wet location.
Operatethe battery charger in temperatures between 23 o and104 ° F(-5 oand 40 ° C). In orderto
reducethe risk of electric shock, useonly the chargerthat is provided bythe manufacturer to charge
the battery.
DO NOTABUSETHECHARGECORD.
Nevercarry the charger bythe cord. Do not disconnect the charger from
the outlet or from the mower by pulling the charger cord.
Do not servicethe mower with the charger connected or with the safety keyinstalled.
Do not useadamagedcharger. Replacethe charger cordsor the chargerimmediately. Keepthe mower
andthe chargerawayfrom water, heatsources (radiators, heaters,stoves,etc.),flames, and chemicals.
Do not dispose of this product in fire, batteries inside this product may explode or leak

Owner's Manual
KNOWYOURPRODUCT
Readthis owner's manual and safety rules carefully before operating the mower.
Comparethe illustration belowto the mower in orderto becomefamiliar yourself with the location of
the various controls and adjustments. Savethis manualfor future reference.
Powerbutton Handlegrip
\
Self-propelled
lever
Micro switch Upperhandle
Fig.1
Switch Lower handle
Battery
Motor housing
Rearbag
Heightadjustment lever
Wheels

Owner's Manual
ASSEMBLINGYOUR LAWN MOWER
PartsList
* Mulch plug (installed at the rear of the mower at the factory)
. Grass catcher bag
. Side discharge chute
.24V Battery (Pre-installed at the factory)
. Battery Charger
. Manual
Note:
•Carefully remove the parts from the box.
• Inspect the parts carefully in order to verify that no breakage or damage occurred during shipping.
•Do not discard the packing material until all parts have been examined.
ASSEMBLINGTHEHANDLE
1. Remove any packing material which may be between the upper and lower handles for slipping purposes.
2. Pull up and back on the upper handle to raise the handle into the operating position, Make certain the lower handle is
seated securely into the handle mounting bracket (see Fig. 2).
3. Align the holes (3) between the upper handle (1) and lower (2) handles, Insert the bolts (4) and tighten them with the
wing nuts (5) provided.
4. Secure the lower handle to the bracket with the handle knob (6) in each side (Fig. 3).
Fig,3J

Owner's Manual
ASSEMBLINGYOUR LAWN MOWER
INSTALLINGTHEGRASSCATCHERBAG(seeFig.4)
1.UNPLUGTHEPOWERCORD,ANDWAITFORBLADETOCOMETOACOMPLETESTOP.
2. Liftthechutecover(1).
3.Whileholdingupthecover(1),placethegrasscatcherbaghangerhooks(2)intotheopeningonthe
chutecover(1)to allowthehangerhookstoattachtotherod(3) whichsecuresthechutecover.
r
Fig.4
NOTE:Foroptimal performance empty grass bagoften during use.
A full grass bagwill inhibit performance of the mower and collection of grass clippings.

Owner's Manual
ASSEMBLINGYOURLAWNMOWER
INSTALLTHESIDEDISCHARGECHUTE(see Fig.5)
This mower has 3 different functions-mulch, side discharge,and rear bag. If you wish to dischargethe
clippings ratherthan mulch, perform these steps.
1. UNPLUGTHEPOWERCORD,AND WAIT FORBLADETOCOMETOA COMPLETESTOP.
2. Lift the side discharge cover (1).
3. Alignthe groovesonthe dischargechute(2)with the pinson the undersideofthe dischargecover (1).
4. Lower the dischargechute (2) until the hooks onthe mower deckare secured inthe openings in
the dischargechute (2).
5. Releasethe side discharge cover (1).
Fig,5

Owner's Manual
ASSEMBLINGYOUR LAWN MOWER
iNSTALLATiONORREMOVALOFTHEMULCHPLUG(seeFig.6)
1.UNPLUGTHEPOWERCORD,ANDWAITFORBLADETOCOMETOA COMPLETESTOP.
2.Toremovethemulchplugliftthechutecover(1)andpulloutonthehandle.
3.Themulchplug(2)isinsertedonananglesoit willrequiresomeforcewhenremoving.
Fig.6
J

Owner's Manual
ASSEMBLINGYOUR LAWN MOWER
ADJUSTTHEUPPERHANDLEHEIGHT(seeFig.7)
1. Loosen the upper handleknob.
2. Adjust the handleto the most comfortable ofthe 3 positions.
3. Tightenthe upper handle knobastight asyou can.
Fig.7

Owner's Manual
OPERATINGYOUR MOWER
TOSTART&STOPTHEMOWER:
Carefullyfollowtheillustrationbelow,in order,whenstartingor stoppingthemower.(seeFig.8& Fig.9)
STARTING/STOPPINGTHEMOWER
See Fig8 & Fig 9.
1. Forthe proper operation of this lawn mower, you needto inert the disable keyin position, then the
lawnmower canbeoperatedbymovethe level releasefirst to makethe switch control levelavailable,
then hold the switch control levelfor operation.
2. Forthe stop of the lawnmower, just releasethe switch control level.
3. Ifyour lawnmower not usedfor awhile, pull out the disablekey,thenthe machine cannot operated
evenactuatedby holding the switch control level.
Disablekey
SWITCH
CONTROL
LEVER LEVER RELEASE
Fig8
SELF-PROPELLEDSWITCH (SeeFig9 )
SWITCH
CONTROL
LEVER
SWITCH
CONTROL
LEVER
Fig9
1. Self-propelled Independently under non-mowing condition. Holdthe pulling leverto allow mower
to self-propel, without havingto pullthe switch control lever.
Releasethe pulling leverto stop the self-propelled function.
2. Self-propelled under mowing conditionlnsert the keyand pull the switch control lever to start
mowing, then repeatstep 1to start or stop self-propelled function.
_. CAUTION:Do not attempt to override the operation of the safety keyor lever.
,_, WARNING: Theoperation of any mower canresult in foreign objects beingthrown intothe eyes,
which can causesevereeyedamage.Always wear safety glasseswhile operatingthe mowerand while
performing any adjustments or repairs.
_, WARNING:Ensurethat other peopleand pets remainat least 50ft.(15m) awaywhen the mower
is in use.
iNSPECTTHECUTTINGAREA
Removeall stones, sticks, wire, bones, and other debris that might bethrown bythe rotating blades.
NOTE:Thismower is equipped with an internal circuit protector, If the mower stops, wait 10 seconds
beforerestarting.

Owner's Manual
OPERATINGYOUR MOWER
ADJUSTTHECUTTINGHEIGHT( see Fig.lO)
1. Simply depressthe lever (1) towards the wheel and moveto desired position. This setsall wheels
to the sameposition.
2. To raisethe height, pull the heightadjustment leverfrom the current stop positiontowards the back
of the mower.
3. Tolower the height, pullthe height adjustment leverfrom the current stop position towards the front
of the mower.
7-PositionHeightAdjustment
1. 1-3/4in. 5. 2-3/4in.
2. 2 in. 6. 3 in.
3. 2-1/4in. 7. 3-1/4in.
4. 2-1/2in.

Owner's Manual
OPERATINGYOUR MOWER
CHARGING PROCEDURE
Note: The batterycan be chargedin or out of the mower.
Thecharger that is supplied with this mower is aspecially designed2=stagecharger.
Step 1:The red light will light up during the rechargecycle.
Step2: The greenlight will light up when the batteryis fully charged.
1. Removethe jack cover.
2. Plug the charger connector into the jack on the battery.
3. insertthe 120 Vplug from the charger into the electricaloutlet.
4. The redlight on the charger should come on, which indicatesthat the charger isworking andthe
batteryis being charged.The redlight will go out andthe greenlight will comeon when the battery
is completely charged (it takes approximately 15 hours to charge afully discharged battery).
©
(9
INSTALLINGBATTERY
!
Push battery down Laminated both
to limit chute after rotaing
Level b,vo rails Slide into the
pole position
REMOVINGBATTERY
Pull up the Rotation and bring lift battery
battery pack
_e n Figure
t,
_, WARNING:Donot store battery in temperatureslower than 32°F (O°C)
BATTERYUSE
NOTE:if the switch does not reengageor the mower does not run
when the battery is installed.
Push the Battery Capacity indicator (BCi) switch, which is located on
the back of the battery.Thelights will indicatethe battery's capacity,
according the following chart.
00000 )
Green Green Green Yellow Red BCIswitch
IB_ 13_ E3_ IC3PEC3_
Lights capacity
3 Green Lights The battery is atfull capacity
2 Green Lights The battery is at 60% capacity
1 Green Light The battery is at 50% capacity
Yellow Light The battery is at 40% capacity and
requires charging soon
Red Light The battery is at 20% capacity and
requires charging

Owner's Manual
OPERATINGYOUR MOWER
_, WARNING: Do not mow a slope that has an angle of greater than 15° (a rise of approximately2-1/2 ft. [ 75 m]every
10 ft. [3m]).Mow a cross the face of a slope, and never up and down.
MOWING TIPS
NOTE: A sharp blade wilt greatly enhance the performance of the mower, especially when cutting high grass.
Be sure to check the blade and to sharpen it at least once per year, as described in the Maintenance section
• Verify that the lawn is free of stones, sticks, wires, and other objects that could damage the blades or the motor.
These objects could be accidentally thrown by the mower in any direction, and could cause serious personal injury to the
operator and to others.
• In order to prevent electric shock, do not operate the mower in damp or wet conditions.
•Do not mow in circles. Travel back and forth across the lawn.
• When cutting thick grass, reduce walking speed in order to allow for a more effective cut and a proper discharge of the
clippings. For a healthy lawn, always cut off one-third or tess of the total length of the grass. The average lawn should be
approximately 1-1/2 to 2 in. (3.8 to 5 cm) long during cool months, and more than 2 in. (5 cm) long during hot months. If
there is growth, the lawn should be cut in the fail.
MULCHING TIPS
NOTE: iNSPECT THE AREA WHERE THE MOWER IS TO BE USED, AND REMOVE ALL STONES, STICKS,WIRE, AND
OTHER DEBRIS THAT MIGHT BE THROWN BY THE ROTATING BLADE.
1. Release the switch to turn the mower OFF when crossing any graveled area (stones can be thrown by the
blade).
2. Set mower to the highest cutting height when mowing on uneven ground or in tall weeds.
3. For effective mulching, do not cut wet grass, because it tends to stick to the underside of the deck, preventing proper
mulching of grass clippings. New or thick grass may require a narrower cut. The ground speed should be adjusted to the
condition of the lawn. If mowing has been delayed and the grass has been allowed to grow longer than 4 in. (10 cm), mew
the lawn twice in order to reduce the grass height to a maximum of 3-1/4 in. (8.3 cm).
4. Walk at a steady pace. Overlap the cutting rows. Do not let the grass get too tall. If the grass gets too long, start at the
highest cutting position and work down to the desired cutting height.
WARNING: If you strike aforeign object, stop the motor and disconnect the power cord. Thoroughly inspect the mower for
any damage. Repair any damage before operating the mower. Excessive vibration of the mower during operation is an
indication of damage. Thoroughly inspect the mower and repair any damage before operating the mower.
( Using a 15-mm wrench or socket, turn the blade nut "CLOCKWISE" to secure the blade.)
5. Please install the mulch plug When mulching. (See page 10)
CUTTING BLADE REPLACEMENT (see Fig.11 & Fig.12)
_ WARNING: Always protect your hands by wearing heavy gloves and/or wrapping the cutting edges with
rags or other materials when performing any maintenance on the blades.
1. RELEASE THE SWITCH LEVER TO TURN THE MOWER OFF, WAIT FOR THE BLADE TO COME TO A
COMPLETE STOP, AND THEN REMOVE THE BATTERY
2. While wearing leather padded gloves, wedge a block of wood between the blade and the mower deck in order to prevent
the blade from turning when the nut is being removed.
3. Using a 15-mm wrench or socket, loosen the blade nut (1) and remove the blade (4). Turn the nut
"COUNTERCLOCKWISE" to loosen it and "CLOCKWISE" to tighten it (this is a reverse rotation nut).
4. Remove the blade nut (1), the square washer (2), the insulator washer (3), and the blade.
5. To re-install the blade, position the blade with the cutting edges toward the ground. Assemble the blade nut, the square
washer, and the insulator washer as shown in following. Using a 15-mm wrench or socket, turn
the blade nut "CLOCKWISE" to secure the blade.

Owner's Manual
OPERATINGYOUR MOWER
Fig.11
Fig.12
1\
NOTE: Be sure to replace the parts in the exact order in which they were removed. When installing the cutting blade,
verify that it is installed with the curved ends pointing toward the mower deck.
CLEAN THE MOWER
WARNING: To reduce the risk of electric shock, do not expose the mower to water.
The underside of mower deck should be cleaned after each use as grass clippings, leaves, dirt and other debris will
accumulate causing rust and corrosion.
Remove any buildup of grass and leaves on or around the motor cover (do not use water). Wipe the mower clean with a
dry cloth occasionally.
• If debris build up on the underside of the unit while using, stop the motor and disconnect it from the power supply. Tilt the
mower forward, or on its side, and scrape it clean with an appropriate toot.
STORAGE
The following steps should be taken to prepare the lawn mower for storage.
•Make certain the power cord is disconnected.
• Clean mower as instructed in previous section.
• Inspect and replace/sharpen blade, if required. Refer to the Maintenance section.
° Store mower in a dry, clean area. Do not store next to corrosive materials, such as fertilizer and rock salt.
• Wipe extension cord to remove any foreign substances such as oil or stains. Replace extension cord if cut or damaged
in any way.
• Wind cord in a series of equal loops to prevent it from tangling.
•Store mower indoors, in a cool, dry place, out of the reach of children. Do not cover lawn mower with a solid plastic sheet.
Plastic coverings trap moisture around the mower causing corrosion.
The handle may be folded away completely for storage.
• Loosen the handle knobs on the sides of the handle, and fold the upper handle down.
• Loosen the handle knobs, pull outwards on each side of the lower handle, and lift the sides of the lower handle past the
edges of the handle mounting brackets. Fold the lower handle f_vard. Make sure not to bend or kink the power cord.

Owner's Menue!
ENVIRONMENTALLYSAFEBATTERYDISPOSAL
Thefollowing toxic and corrosivematerialsare in the batteriesusedin this batterypack:atoxic material.
_WARNIN6
Alltoxic materialsmustbedisposedof in aspecifiedmannerto preventcontaminationofthe environment.
Dispose of batteriesaccording to localby-laws becausethis Lead-acidbatteries contain leadthat are
hazardousmaterials.
Ifthebatterypackcracksorbreaks,withor withoutleaks,donot rechargeitanddonot use.Disposeofit and
replacewith anewbatterypack.DONOTATTEMPTTOREPAIRIT!
Toavoidinjury andriskof fire, explosion,or electricshock,andto avoiddamagetothe environment:
*CoverThe Battery's Terminals With Heavy-duty Adhesive Tape.
.Do Not Attempt To Remove OrDestroy Any Of TheBattery Pack Components.
Do Not Attempt To OpenThe Battery Pack.
if aleak develops, the releasedelectrolytes arecorrosive andtoxic, do not get
the solution in the eyesor on skin, and do not swallow it.
Do Not Place These Batteries In Your Regular Household Trash.
Do Not Incinerate.
Do Not Place ThemWhere They Will Become Part Of Any
waste landfill or municipal solid waste stream.
TakeThem To A Certified Recycling Or DisposalCenter.
SERVICE
1. When servicing the mower, useonly replacementparts that areavailablefrom the manufacturer.
Inorder to obtain replacement parts,call the toll-free helpline.The useof parts thatdo not meetthe
original equipment specifications may leadto improper performance, and may compromise safety.
2. Beforecleaning, repairing,or inspecting, verify that the bladeandall moving parts havecome to a
completestop, and removethe safetykey. Inorderto preventaccidentalstart-ups, removethe safety
keywhenthe mower is not in use. Removethe battery when makinganyadjustments or whenany of
the four wheels must be lifted off the ground.
3. Keepthe handles dry, clean,andfree of oil andgrease.
4. Inorder to reducethe risk of fire, keepthe motor free of grass, leaves,anddebris build-up.
5. Frequentlycheck the bladeand motor mounting bolts for proper tightness. Visually inspectblade
for damage(e.g.: bent, cracked, or worn).
6. Forbest andsafest performance, maintain the mower with care. Keepthe mower bladesharp and
clean.Mower bladesaresharp, andcan cut. Wrap the bladesor wear gloves, and use extracaution
when servicing.
7. Keepall nuts,bolts, and screws tight in order to be surethat the equipment is insafe working
condition.
8. Nevertamper with safetydevices. Checkthem regularlyfor proper operation.
9. After striking aforeign object, stop the motor and removethe safetykey.Thoroughly inspectthe
mowerfor any damage. Repairany damage before operating the mower.
10. Lawn mower components aresubject to wearand damage,which could expose moving parts or
allow objects to bethrown. Asa safety precaution, frequently checkcomponents and replacethose
that show signs of wear or damage.
11. When it is not in use, store the mower indoors in adry area,with the safety keyremoved, andout
of the reachof children.

Owner's Manual
PARTS LIST
6
_39 40
/
/

Owner's Manual
PARTS LIST
APA Part No. Part No. Description QTY
PM207AC-01-QQ-01 8220502 Hexagon Lock Nut M8 4
PM207AC-02-QQ-02 8240112 Wash • 8 7
PM207AC-03-QQ-03 8412501 Han2 Hook 1
PM207AC-04-QQ-04 8220401 Cap Screw M5 x 14 4
PM207AC-05 -QQ-05 8321301 Height Adjustment Shaft 1
PM207AC-06-QQ-06 8419001 Height Adjustment Handle 1
PM207AC-07-QQ-07 8221101 (ap Screw M4× 14 2
PM207AC-08-QQ-08 8430201 Rear Shield 1
PM207AC-09-QQ-09 8221001 Hex lock nut M4 1
PM207AC- 10-QQ- 10 8411101 Rear Cover 1
PM207AC-11-QQ-11 8247501 Open Circlip 7 2
PM207AC-12-QQ-12 8331601 Spring Board 1
PM207AC- 13-QQ- 13 8228401 Hexagon Lock Nut M5 4
PM207AC- 14-QQ- 14 8411301 Side-Discharge Deflector 1
PM207AC- 15-QQ- 15 8220801 Tapping Screw ST 4.8 ×18-F 20
PM207AC- 16-QQ- 16 8411401 Side-Discharge Cover 1
PM207AC- 17-QQ- 17 8331801 Side-Discharge Bracket 1
PM207AC-18-QQ-18 8220601 Bolt M6 x 15 2
PM207AC-19-QQ-19 8320801 Side Compression Spring 1
PM207AC-20-QQ-20 8320201 Side-Discharge-Pin 1
PM207AC-21-QQ-21 8220501 Bolt M10x20 4
PM207AC-22-QQ-22 8330801 Right Height Adjustment Board Assy 1
PM207AC-23-QQ-23 8322901 Back Cover Spring Right 1
PM207AC-24-QQ-24 8320401 Shaft For Rear Cover 1
PM207AC-25-QQ-25 8440201 Grass Collection Bags 1
PM207AC-26-QQ-26 8321401 Bracket For Grass Catcher 1
PM207AC-27-QQ-27 8410501 Knob 4
PM207AC-28-QQ-28 8220102 Lock Shaft Nut 1
PM207AC-29-QQ-29 8220202 Putters Bolt 2
PM207AC-30-QQ-30 8331901 Blade Fix Stand 1
PM207AC-3 I-QQ-31 8321001 Left back cover Spring 1
PM207AC-32-QQ-32 8238301 Flange Nut M10 4
PM207AC-33-QQ-33 8331101 Support Plate Right 1
PM207AC-34-QQ-34 8331001 Support Plate Left 1
PM207AC-35-QQ-35 8412701 Fan 1
PM207AC-36-QQ-36 8410101 Motor Housing 1
PM207AC-37-QQ-37 8330401 Fan Gasket 1
PM207AC-38-QQ-38 8220302 Hexagon Bolt M8 x 20 3
PM207AC-39-QQ-39 8410601 Motor Bracket 1
PM207AC-40-QQ-40 8330601 Shaft For Rear Cover 1
PM207AC-41-QQ-41 8227502 Flange Nut M8 3
PM207AC-42-QQ-42 8320901 Tension Springs 1