STERNGLAS Chrono User manual

1 2 3
Button A
24 hour hand
Chronograph second hand
Chronograph minute hand
Hour hand
Button B
Minute hand
Manual Chrono
Remove the lock from the crown.
To set the correct time, pull the crown to
position 3 and wind until the correct time is
displayed.
To set the date, push the crown in by one
position so that it is in position 2. Turn the
crown clockwise until the correct date is
displayed. Now you can push the crown
back in to its original position (position 1).
Note: Your date changes at noon? This is
because the movement does not “know”
whether it is noon or midnight. Simply wind
your timepiece forward by 12 hours.
→
01
02
03
How to setup your timepiece

1 2 3
Button A
24 hour hand
Chronograph second hand
Chronograph minute hand
Hour hand
Button B
Minute hand
Manual Chrono
Your chronograph can measure time in
1-second units - up to 59 minutes and 59
seconds. Press button A to start and stop
the timekeeping. When you press button
B, the chronograph second hand and
chronograph minute hand return to the zero
position.
Note: The chronograph second hand is not
at the 12 o’clock position when you reset
it? Pull the crown to position 3 and press
pusher A repeatedly until the chronograph
seconds hand is at the 12 o’clock position.
04
How to setup your timepiece