200
m
/
660
ft
WATER RESISTANT
8
DATE
MINUTE
HAND
SECOND
HAND
HOUR
HAND
SCREW
DOWN
CROWN
USING THE SCREW-DOWN CROWN
DO NOT PULL THE CROWN UNLESS
IT IS UNSCREWED FIRST:
NOTE: Failure to SECURELY screw
down the crown after setting the
watch may affect its water resistance.
TO UNSCREW:
Turn the crown
anti-clockwise until it
turns freely without
tension. GENTLY pull the
crown out to the other
desired positions for
watch setting (see specific
operating instructions on
the following pages).
HOW TO SET THE TIME
1. Unscrew the crown and pull it out
to position [3]-(2nd click).
2. Turn the crown anti-clockwise to set
the correct time.
3. Push the crown in then screw it
securely.
* Take a.m./p.m. into consideration
when setting the hour and minute
hands to the desired time.
* Always be certain that your crown is
SECURELY SCREWED; this will
prevent moisture from entering in.
TO SCREW:
Push the crown ALL THE
WAY IN (towards the
watch) THEN begin to
turn clockwise until it is
securely screwed down.
Laguna
For more details on operating this timepiece
please refer to the enclosed booklet or visit :
UNI-DIRECTIONAL
TURNING BEZEL
HOW TO SET THE DATE
1. Unscrew the crown and pull it out
to position [2]-(1st click).
2. Turn the crown counter-clockwise
to set the correct date.
3. Push the crown in then screw it
securely.
* Do not set the date between 9:00 P.M.
and 4:00 A.M.
0
2
0
PLEASE READ THE FOLLOWING
BEFORE UNSCREWING THE CROWN:
SCREW-DOWN CROWN
Screw-down crowns are used to
ensure water resistance. ALWAYS be
certain that your crown is securely
screwed down (Position [0] is secured.
Positions [1], [2] and [3] are not
secured for water resistance).
Do NOT unscrew your crown while
you are in any environment where
moisture is present.
0 1 2 3
CLOSED
Securely screwed
+ Water Resistance
OPENED
Not secured
For Water Resistance
0
1
2 3 4
1
0
3
2
0
(2nd click)(1st click)
To ensure correct care, please take
some time to review the enclosed
instruction to review how to operate
your watch.
Instruction
Manual
Vol.1.04 EN
