Stiga MCS 470 Li 60 series User manual
IT
Tosaerba a batteria con conducente a piedi
MANUALE DI ISTRUZIONI
ATTENZIONE: prima di usare la macchina, leggere attentamente il presente libretto.
BG
.
BS
Kosilica na bateriju na guranje
UPUTSTVO ZA UPOTREBU
CS
DA
BRUGSANVISNING
DE
GEBRAUCHSANWEISUNG
EL
EN
OPERATOR’S MANUAL
ES
MANUAL DE INSTRUCCIONES
ET
KASUTUSJUHEND
FI
KÄYTTÖOHJEET
FR
MANUEL D’UTILISATION
HR
HU
LT
NAUDOJIMO INSTRUKCIJOS
LV
LIETOŠANAS INSTRUKCIJA
MK
NL
Lopend bediende grasmaaier met batterij
GEBRUIKERSHANDLEIDING
NO
INSTRUKSJONSBOK
171506288/2 02/2020
MCS 470 Li 60 series
PL
PT
MANUAL DE INSTRUÇÕES
RO
RU
SK
SL
SR
SV
BRUKSANVISNING
TR
KULLANIM KILAVUZU
ITALIANO -
...................................................................................................
IT
........................................................................... BG
BOSANSKI - Prijevod originalnih uputa
........................................................................................ BS
.......................................................................... CS
DANSK - Oversættelse af den originale brugsanvisning
............................................................... DA
DEUTSCH - Übersetzung der Originalbetriebsanleitung
............................................................... DE
..................................................................... EL
ENGLISH - Translation of the original instruction
.......................................................................... EN
ESPAÑOL - Traducción del Manual Original
................................................................................ ES
..................................................................................... ET
.................................................................................... FI
FRANÇAIS - Traduction de la notice originale
.............................................................................. FR
HRVATSKI - Prijevod originalnih uputa
......................................................................................... HR
........................................................................... HU
............................................................................... LT
................................................................... LV
............................................................... MK
.................................................... NL
........................................................... NO
................................................................................. PL
............................................................................... PT
............................................................................. RO
...................................................................... RU
............................................................... SK
...................................................................................... SL
SRPSKI - Prevod originalnih uputstva
........................................................................................... SR
.................................................................. SV
.................................................................................... TR
A
B
C
D
E
HI
J
F
G
14
2
3
6 8
5 7
11
W
12
10
9
Type:
- s/n
Art.N.
d.c.
1
2
3
4 5
A
A
B
6
7
8
A
B
A
A
A
A
A
A
A
I
II
III
A
A
C
B
9 10
11 12
13
B
A
A
B
A
C
14
A
B
15 16
17 18
A
B
B
DATI TECNICI
MCS 470 Li 60
Series
W 1300
-1 2900
V / d.c. 60
V / d.c.
23÷27
Codice dispositivo di taglio
Livello di pressione acustica
dB(A)
dB(A) 70
0,85
dB(A)
dB(A) 82
1,07
Livello di potenza acustica garantito dB(A) 83
Livello di vibrazioni
2
21,7
1,28
ACCESSORI A RICHIESTA
-
BT 60 Li 5.0
CG 60 Li
[1]
[3]
[12]
[13]
[1]
NOMINAL
[9] Šifra rezne glave
[11] Mjerna nesigurnost
[1]
CS - TECHNICKÉ PARAMETRY
[5]
stroje.
[1] DA - TEKNISKE DATA
NOMINAL
[7] Klippebredde
-
[1] DE - TECHNISCHE DATEN
[5] Versorgungsspannung und -frequenz
NOMINAL
[7] Schnittbreite
[13] Garantierter Schallleistungspegel
[17] Batterien, Mod.
[18] Batterieladegerät, Mod.
[1]
[3]
NOMINAL
[1] EN - TECHNICAL DATA
NOMINAL
[10] Acoustic pressure level
[15] Accessories available on request
[1] ES - DATOS TÉCNICOS
NOMINAL
[9] Código dispositivo de corte
[15] Accesorios bajo pedido
-
[1] ET - TEHNILISED ANDMED
[5] Toite pinge ja sagedus NOMINAL
[1] FI - TEKNISET TIEDOT
[12] Mitattu äänitehotaso
[13] Taattu äänitehotaso
[15] Tilattavat lisävarusteet
tunnuslaatassa annettuihin tietoihin.
[1] FR - CARACTÉRISTIQUES
TECHNIQUES
NOMINAL
[7] Largeur de coupe
[9] Code organe de coupe
[10] Niveau de pression acoustique
[12]
[13]
Niveau de puissance acoustique garanti
[1]
NOMINAL
[11] Mjerna nesigurnost
[15] Dodatni pribor na upit
-
[1]
-
MINAL
[1] LT - TECHNINIAI DUOMENYS
[1] LV - TEHNISKIE DATI
NOMINAL
[1]
NOMINAL
[12]
[1]
NL - TECHNISCHE GEGEVENS
[5] Spanning en frequentie voeding
NOMINAL
[7] Maaibreedte
[9] Code snij-inrichting
[15] Optionele accessoires
[1] NO - TEKNISKE DATA
[7] Klippebredde
[16] Mulching-sett
[1] PL - DANE TECHNICZNE
NOMINAL
-
-
[1] PT - DADOS TÉCNICOS
NOMINAL
[9] Código dispositivo de corte
[15] Acessórios a pedido
[1] RO - DATE TEHNICE
[3]
NOMINAL
[15] Accesorii la cerere
[1]
[3]
NOMINAL
[1] SK - TECHNICKÉ PARAMETRE
NOMINAL
[1]
napajanja NOMINAL
[7] Širina reza
[9] Šifra rezalne naprave
[11] Merilna negotovost
[1]
NOMINAL
[9] Šifra rezne glave
[11] Merna nesigurnost
[1] SV - TEKNISKA SPECIFIKA-
TIONER
[3]
[1]
-
NAL
EN - 1
1. GENERAL INFORMATION
1.1 HOW TO READ THE MANUAL
NOTE OR IMPORTANT these give details or
further information on what has already been said,
and aim to prevent damage to the machine.
The
1.2 REFERENCES
1.2.1 Figures
1.2.2 Titles
2. SAFETY REGULATIONS
2.1 TRAINING
Become acquainted with the controls and the
proper use of the machine. Learn how to stop the motor
quickly. Failure to follow the warnings and instructions
may result in re and/or serious injury.
WARNING!: READ THOROUGHLY THE INSTRUCTION BOOKLET
EN
INDEX
1. GENERAL INFORMATION .......................................... 1
...................................... 1
1.2 References.......................................................... 1
2. SAFETY REGULATIONS ............................................. 1
2.1 Training................................................................ 1
....................................... 2
2.3 During operation ................................................. 2
......................................... 2
..................................... 3
.................................... 3
3. GETTING TO KNOW THE MACHINE.......................... 3
..... 3
.........................................................
...............................................
................................................
................................................................... 5
....................................... 5
................................................ 5
5. CONTROLS.................................................................. 5
........................ 5
5.2 Handle ................................................................ 5
................................... 5
6. USING THE MACHINE................................................. 6
....................................... 6
...................................................... 6
6.3 Start-up ............................................................... 6
............................................................ 6
6.5 Stop7
6.6 After operation..................................................... 7
7. ROUTINE MAINTENANCE .......................................... 7
............................................ 7
................................................................. 8
7.3 Cleaning .............................................................. 8
..................................................... 8
........................................... 9
8. OCCASIONAL MAINTENANCE................................... 9
..................................................... 9
9. STORAGE..................................................................... 9
............................................ 9
............................................... 9
10. HANDLING AND TRANSPORTATION ........................ 9
11. ASSISTANCE AND REPAIRS ...................................... 9
12. WARRANTY COVERAGE.......................................... 10
13. Maintenance table............................................. 10
........................................11
15. ATTACHMENTS ON REQUEST ................................ 12
15.1 Batteries............................................................ 12
EN - 2
•
•
•
•
for accidents or unexpected events occurring to other
•
2.2 PRELIMINARY PROCEDURES
•
open sandals. Wear hearing protection devices.
•
•
•
•
•
2.3 DURING OPERATION
•
•
•
•
•
•
(hills, dips), slopes, hidden hazards and
•
•
•
•
before and during operations in reverse gear.
•
•
•
•
•
If something breaks or an accident occurs during
mowing, turn o the motor immediately and move the
machine away to prevent further damage; if an accident
occurs with injuries or third parties are injured, carry
out the rst aid measures most suitable for the situa-
tion immediately and contact the medical authorities
for any necessary health care. Carefully remove any
debris which could cause damage or injury to persons
or animals if ignored.
Use limitations
•
side discharge guards rear discharge guards).
•
tools are not installed in their seats.
•
•
2.4 MAINTENANCE, STORAGE
Maintenance
•
be replaced and never repaired.
•
The noise and vibration levels shown in these
instructions are the maximum levels for use of the
machine. The use of an unbalanced cutting element,
the excessive speed of movement, or the absence of
maintenance have a signicant inuence on noise
emissions and vibrations. Consequently, it is necessary
to take preventive steps to eliminate possible damage
due to high levels of noise and stress from vibration.
Maintain the machine well, wear ear protection devices,
and take breaks while working.
EN - 3
Storage
•
2.5
IMPORTANT The following safety instructions
are in addition to the safety requirements
provided in the specic battery and battery
charger manual delivered with this machine.
•
•
•
•
•
•
2.6 ENVIRONMENTAL PROTECTION
• Avoid being a disturbance to the neighbourhood.
•
•
•
According
to the European Directive 2012/19/UE on
Batteries contain
3. GETTING TO KNOW THE MACHINE
3.1 DESCRIPTION OF THE MACHINE
AND PLANNED USE
This machine is pedestrian controlled lawnmower.
3.1.1 Intended use
for cutting (and collecting) grass in gardens and
1.
2.
3.1.2 Improper use
cutting vegetation other than grass.
IMPORTANT Improper use of the machine will
invalidate the warranty, relieve the Manufacturer from
all liabilities, and the user will consequently be liable
for all and any damage or injury to himself or others.
3.1.3
i.e. non-professional operators.
IMPORTANT The machine must
be used by one operator.
3.2 SAFETY SIGNS
Warning. Read the instructions
put hands or feet near or under the
cutting means. Do not put hands
or feet near or under the opening
IMPORTANT Any damaged or illegible
decals must be replaced. Order replacement
decals from an authorised service centre.
3.3 IDENTIFICATION LABEL
1.
2.
3.
4.
5.
6.
7. Article code.
8.
9.
10.
11. Electrical protection rating.
12.
IMPORTANT Quote the information on
the product identication label whenever you
contact an authorised service workshop.
IMPORTANT The example of the Declaration of
Conformity is provided on the last pages of the manual.
3.4 MAIN COMPONENTS
A. Chassis: this is the casing that houses
B. Motor: the driving force for the cutting
C. Cutting means:
designed to cut the grass.
D. Handle:
It is long enough to ensure the operator
E.
F. starts/stops the
G. the lever
H.
I.
EN - 5
4. ASSEMBLY
The safety regulations to follow are described in
chap. 2. Strictly comply with these indications to avoid
serious risks or dangers.
Unpacking and completing the assembly should
be done on a at and stable surface, with enough spa-
ce for moving the machine and its packaging, always
making use of suitable equipment. Do not use the ma-
chine until all the indications provided in the “ASSEM-
BLY” section have been carried out.
4.1 ASSEMBLY COMPONENTS
4.1.1
1.
2.
including these instructions.
3.
4.
Before assembling, make sure the safety key is
not inserted in its housing.
4.2 HANDLE ASSEMBLY
5. CONTROLS
5.1
IMPORTANT Remove the safe key whenever
the machine is unused or left unattended.
5.2 HANDLE
5.2.1
1. Run.
2.
Ignition of the motor simultaneously
engages the cutting means.
3. Stop.
lever (Fig.5.B) is released.
5.2.2
1.
(Fig.6.B).
1. Maximum speed
2. Minimum speed
NOTE The last speed level selected
remains set after the machine shutdown.
IMPORTANT The motor must always be
running with the drive disengaged.
IMPORTANT To prevent damage to
the transmission, do not pull the machine
backwards with the drive engaged.
NOTE Drive can also be engaged at
machine switched o, with battery and
safety key inserted in their housing.
5.3
Do this when the cutting means is stationary.
EN - 6
6. USING THE MACHINE
The safety regulations to follow are described in
chap. 2. Strictly comply with these indications to avoid
serious risks or dangers.
6.1 PRELIMINARY PROCEDURES
position on the ground.
6.1.1
6.1.2 Cutting height adjustment
Adjust the cutting height as indicated in (par. 5.3).
6.2 SAFETY CHECKS
results correspond to those outlined on the tables.
Always carry out the safety checks before use.
6.2.1
Object Result
Grips
Handle
Control lever
Drive lever
forcing and should
the neutral position.
(not loose).
Cooling air ducts Not clogged.
Machine
6.2.2 Machine operating test
Action Result
1. Start the machine
(par. 6.3).
2. Release the control
lever (Fig.27.A).
1. The cutting means
should move.
2. The lever should return
-
-
-
1. Start the machine
(par. 6.3).
2. Engage the drive
lever (par. 5.2.2).
3. Disengage the
drive lever.
2. The wheels should
move the machine
forward.
3.
Test driving
If any of the results fail to match the indications
provided in the tables, do not use the machine! Contact
a service centre to have it checked and repaired if ne-
cessary.
6.3
NOTE Start up the machine on a at
surface without obstacles or high grass.
1. Open the hatch for accessing the battery com-
partment (Fig.8.A).
2. -
position, in ensuring the electrical contact.
3. .
4.
5.
pull the control lever (Fig.9.B).
6.4 OPERATION
IMPORTANT When working, always keep
a safe distance from the cutting means,
given by the length of the handle.
IMPORTANT If the motor stops because
it is overheated while mowing, you must wait
approximately 5 minutes before restarting it.
EN - 7
6.4.1 Grass cutting
1.
2.
3.
1.
total grass height per single pass (Fig.11).
2.
3.
4.
6.4.2
•
•
and the second cut at the height desired.
•
•
•
•
6.5 STOP
1. Release the control lever (Fig.12.A).
2.
When you have stopped the machine, it will take a
few seconds for the cutting means to stop.
IMPORTANT Always stop the machine.
• When moving between work areas.
• When driving on grass free surfaces.
• Every time it is necessary to overcome an obstacle.
• Before adjusting the cutting height.
6.6 AFTER OPERATION
1. Stop the machine (par. 6.5).
2. Open the battery housing hatch and remove the
safety key (Fig. 13.A).
3.
4. Recharge it (par 7.2.3).
5. -
ring in an enclosed space.
6. Clean (par. 7.3).
7. -
-
or contact the authorised service centre.
IMPORTANT Remove the safe key whenever
the machine is unused or left unattended.
7. ROUTINE MAINTENANCE
7.1 GENERAL INFORMATION
The safety regulations to follow are described in
chap. 2. Strictly comply with these indications to avoid
serious risks or dangers.
Before conducting any inspections, cleaning or
maintenance/adjustment interventions on the machine:
• Stop the machine.
• Remove the safety key, (never leave the
key in the ignition or within reach of
children or unauthorised persons).
• Remove the battery.
• Make sure that all moving parts have
come to a complete stop.
• Allow the motor to cool before
storing in an enclosed space.
• Read the relevant instructions.
• Use suitable clothing, protective
gloves and goggles.
•
•
EN - 8
•
IMPORTANT Any maintenance and adjustment
operations not described in this manual must be carried
out by your dealer or Authorised Service Centre.
7.2 BATTERY
7.2.1
a.
b.
c.
Setting a cutting height that is too
NOTE During use, the battery is protected against
total drainage with a protective device that switches
o the machine and stops it from working.
7.2.2
1. Open the battery housing hatch and remove the
safety key (Fig.13.A)
2.
3. -
4.
5. -
NOTE The battery is equipped with a guard
that inhibits recharging if the environmental
temperature is not between 0 and +45 °C.
NOTE The battery can be recharged at any
time, even partially, with no risk of damaging it.
7.2.3
1.
2.
3. -
-
4.
5.
7.3 CLEANING
7.3.1 Cleaning the machine
•
•
• Do not use aggressive liquids to clean the chassis.
•
leaves, or excessive grease.
7.3.2
7.4 NUTS AND BOLTS
7.5 CLEANING THE TRANSMISSION
Other manuals for MCS 470 Li 60 series
6
Table of contents
Other Stiga Lawn Mower manuals
Stiga
Stiga SCM 240 R User manual
Stiga
Stiga PA409 User manual
Stiga
Stiga MULTICLIP 50 RENTAL User manual
Stiga
Stiga NTL 434-R User manual
Stiga
Stiga TURBO 8211-0208-08 User manual
Stiga
Stiga Multiclip User manual
Stiga
Stiga VILLA Series User manual
Stiga
Stiga E 300 Li 20 Series User manual
Stiga
Stiga Villa 2WD Series User manual
Stiga
Stiga COLLECTOR 45 COMBI EL User manual
Stiga
Stiga PARK RANGER User manual
Stiga
Stiga Multiclip User manual
Stiga
Stiga E 300 Li 20 Series User manual
Stiga
Stiga Park series User manual
Stiga
Stiga EW 330 User manual
Stiga
Stiga F 72 FL User manual
Stiga
Stiga Villa Royal User manual
Stiga
Stiga MULTICLIP 46 ELECTRIC User manual
Stiga
Stiga MJ 66 User manual
Stiga
Stiga SILEX 87 G User manual
