Stiga Escalade Sports T8530F User manual

1. Read this manual carefully before starting assembly. Read each step completely before beginning
each step.
2. Some smaller parts may be shipped inside larger parts. Check inside all parts and cartons before
assembling or ordering parts.
3. If hardware is tightened too soon, mounting holes may not align and parts may not easily fit together.
Leave bolts slightly loose until you are instructed to tighten them.
4. Tools required for assembly: Wrenches or adjustable wrenches (not provided) are helpful.
5. To make assembly as easy as possible, place all parts of the table tennis in a cleared area and
remove the packaging material. Organize all parts as per parts identifier in the assembly manual.
Do not dispose of the packing material until assembly is completed.
6. Avoid scratching table tennis top and metal tube parts during the assembly process.
7. Assemble product on clean, level and flat surface.
8. Take time to correctly orientate parts exactly as per each assembly diagram.
9. Save this instruction in the event that the manufacturer has to be contacted for replacement parts.
O W N E R ’ S M A N U A L
Please visit our website at: www.escaladesports.com
ON-LINE TROUBLE SHOOTING TECHNICAL ASSISTANCE
ON-LINE PARTS REQUESTS FREQUENTLY ASKED QUESTIONS
ADDITIONAL ESCALADE SPORTS PRODUCT INFORMANTION
R
Escalade Sport products may be manufactured and/or licensed under the following patents.
6120397 , 5816957 , 5769744 , 5119741 , 4911085 , 4717157 , D460140 , D420563
Additional patents may be pending. One or more of the listed patents and/or pending patents may cover specific product.
R
P
Thank you for buying our product. We try hard to ensure that our products are of high quality and free of problems, such as
Manufacturing defects or missing parts. However, if you have any problems with your new product, please DO NOT RETURN IT
TO THE STORE!
Be sure to write your model number and serial number here
for future reference. You can find these numbers printed on
the bottom of the table.
MODEL NO.: T8530F/W
DATE CODE : CPSIA#2-T8530F/W-________SY
PURCHASE DATE : _______________________
Please provide model number and/or part number of the product and/or part when you call or write. These numbers can be found on the
product, packaging, and/or in this Owner’s Manual.
READ ASSEMBLY, OPERATING AND SAFETY INSTRUCTIONS
CAREFULLY! AT LEAST TWO CAPABLE ADULTS ARE NEEDED TO
PUT THIS TABLE TOGETHER!
NOTICE:
2023 Escalade Sports
R
C
lease Do Not Return This Product To The Store!
Contact Escalade Sports customer service department at:
Phone: [phone] Toll-Free!
Fax: [phone] Toll-Free!
E-mail: [e-mail]
R
Mailing Address
(correspondence only):
Escalade Sports
PO Box 889, Evansville, IN 47706
Physical Location:
Escalade Sports
817 Maxwell Ave.
Evansville, IN 47711

CARE AND MAINTENANCE
You have purchased a quality product that will give you years of enjoyment. By following these simple
maintenance steps, you will add to the life of your new table.
The top (playing surface) of your table is made of Mid-Density Board. Like all products made of wood, it
can be affected by atmospheric changes in both temperature and humidity. This may cause a slight
sag or distortion as the top expands or contracts. This is normal and should not cause concern as it
does not detract from the play or utility value of the table. After assembly of the table, you can minimize
the effects of temperature and humidity changes by storing the table in a dry area when table is not
in use.
This table must be stored indoors to prevent damage to the playing surface. Dampness and extreme
temperature changes can cause the wood to warp, swell, crack or blister. When your table is not in
use, it should be stored in a dry area. Due to the nature of particle board, table top may bow.
Damp and humid conditions will amplify this. This is normal and will not affect playability of table.
THE TABLE TOP
STORAGE OF YOUR TABLE
To clean your table use a soft, damp (NOT WET) cloth only. To prevent damage to your table’s playing
surface, DO NOT USE ANY CHEMICALS, ABRASIVE OR CLEANING PRODUCTS on your table’s playing
surface.
CLEANING YOUR TABLE
Be sure to oil all moving parts of your table including the pivot points. This will insure the safety and ease
of use of your table.
MAINTENANCE OF YOUR TABLE
If table does not seem level, it is probably due to uneven or unlevel floors. Set the table in its PLAYING
POSITION and move table several inches in different directions to find the best location for the table.
If the floor is extremely unlevel, table may not play or operate properly.
I
The table has leg levelers - Adjust leg levelers as required.
f table is high in the center, shim up under the outer legs.
UNLEVEL FLOORS
This table must be kept indoors to prevent damage to the playing surface. Dampness and extreme
temperature changes which occur on patios or similar areas can cause wood to warp, swell, crack or
blister.
- 2 -

- 3 -
HARDWARE IDENTIFIER (To Scale)
H1 - 8mm x 65mm
Hex Head Bolt
(4 pcs)
H2 - 8.5mm x 20mm
Flat Washer
(72 pcs)
(Not to Scale)
H3 - M8 Nylock Nut
(36 pcs)
H4 - 8mm x 80mm
Hex Head Bolt
(8 pcs)
H5 - M8 Lock Washer
(36 pcs)
H6 - 8mm x 130mm
Hex Head Bolt
(8 pcs)
H7 - 8mm x 55mm
Hex Head Bolt
(16 pcs)
H8 - 3.5mm x 20mm
Phillips Round Head Screw
(16 pcs)
H9 - 3.5mm x 14mm
Phillips Round Head Screw
(16 pcs)
H11 - 6mm x 35mm
Allen Head Bolt
(12 pcs)
H10 - 4mm x 63mm
Phillips Round Head Screw
(28 pcs)
H12 - 6.5mm x 18mm
Flat Washer
(12 pcs)
T1 - Allen Wrench
(1 pc)
(Not to Scale) (Not to Scale)
T2 - 13mm Wrench
(1 pc)
T3 - 14mm Wrench
(1 pc)

- 4 -
PARTS IDENTIFIER (Not to Scale)
P1 - Half Table Tennis
Top Assembled
(2 pcs)
P2 - Left Leg
Side Panel
(2 pcs)
P3 - Right Leg
Side Panel
(2 pcs)
P6 - Cross Support Tube
(2 pcs)
P7 - Triangle Leg
Support Block
(8 pcs)
P8 - Long Side Leg
Support Panel
(2 pcs)
P9 - Short End Leg
Support Panel
(2 pcs)
P10 - Triangle Leg
End Cap
(4 pcs)
P13 - Net Post
(2 pcs)
P4 - Left Leg
Front Panel
(2 pcs)
P5 - Right Leg
Front Panel
(2 pcs)
P11 - Leg Support
Bracket
(4 pcs)
P12 - Leg Leveler
(4 pcs)
P14 - Net
(1 pc)

- 5 -
IMPORTANT NOTE: Place table half top with playing surface face down on a CLEAN flat surface
for ease of correct assembly and to prevent any scratches or blemishes to the playing surface.
PARTS REQUIRED
2 pcs - P1 Half Table Tennis Top Assembled 4 pcs - H3 M8 Nylock Nut 1 pc - T2 13mm Wrench
4 pcs - H1 8mm x 65mm Hex Head Bolt 4 pcs - H5 M8 Lock Washer 1 pc - T3 14mm Wrench
8 pcs - H2 8.5mm x 20mm Flat Washer
STEP 1:
Attach both P1 Half Table Tennis Top Assembled using H1 Bolts, H5 Lock Washers, H2 Flat Washers and H3 Nylock Nuts as shown
in FIGURE 1 and DETAIL A. IMPORTANT NOTE! Make sure table halfs are aligned and flat before moving to STEP 2.
FIGURE 1
DETAIL A
PARTS REQUIRED
2 pcs - P6 Cross Support Tube 28 pcs - H10 4mm x 63mm Phillips Round Head Screw
STEP 2:
Make sure table halfs are aligned and flat before attaching P6 Cross Support Tubes.
Attach two P6 Cross Support Tube using H10 Screws as shown in FIGURE 2. Do not strip out H10 screws.
NOTICE:
METAL BADGE FACES
OUTWARD ON END OF
TABLE.
NOTICE:
MAKE SURE TABLE HALFS ARE
ALIGNED AND FLAT BEFORE
MOVING TO STEP 2.
H1 H5
H2
H2
H3
NOTICE:
是非成败转头空，青山依旧在，惯看
秋月春风。一壶浊酒喜相逢，古今多
NOTICE:
MAKE SURE TABLE HALFS ARE
ALIGNED AND FLAT BEFORE ATTACHING
P6 CROSS SUPPORT TUBES.
P1
P1
P6 P6 H10
FIGURE 2
是非成败转头空，青山依旧在，惯看
秋月春风。一壶浊酒喜相逢，古今多
NOTICE:
MAKE SURE TABLE HALFS ARE
ALIGNED AND FLAT BEFORE ATTACHING
P6 CROSS SUPPORT TUBES.

- 6 -
PARTS REQUIRED
2 pcs - P2 Left Leg Side Panel 12 pcs - H11 6mm x 35mm Allen Head Bolt 1 pc - T1 Allen Wrench
2 pcs - P3 Right Leg Side Panel 12 pcs - H12 6.5mm x 18mm Flat Washer
2 pcs - P4 Left Leg Front Panel
2 pcs - P5 Right Leg Front Panel
STEP 3:
Attach P2 Left Leg Side Panels to P4 Left Leg Front Panels using H11 Bolts and H12 Flat Washers as shown in FIGURE 3.
Tighten H11 Bolts using T1 Wrench.
Attach P3 Right Leg Side Panels to P5 Right Leg Front Panels using H11 Bolts and H12 Flat Washers as shown in FIGURE 3.
Tighten H11 Bolts using T1 Wrench.
P2
(Left Leg
Side Panel)
P4
(Left Leg
Front Panel)
P3
(Right Leg
Side Panel)
P5
(Right Leg
Front Panel)
H11
H12
H11
H12
FIGURE 3
PARTS REQUIRED
4 pcs - P10 Triangle Leg End Cap 16 pcs - H8 3.5mm x 20mm Phillips Round Head Screw
4 pcs - P11 Leg Support Bracket 16 pcs - H9 3.5mm x 14mm Phillips Round Head Screw
STEP 4:
Attach P10 Triangle Leg End Caps onto each Leg Assembly from STEP 3 using pre-drilled holes with H8 Screws as shown in
FIGURE 4 and DETAIL B. DO NOT STRIP OUT H8 SCREWS.
Attach P11 Leg Support Brackets onto each Leg Assembly from STEP 3 using pre-drilled holes with H9 Screws as shown in
FIGURE 4 and DETAIL C. DO NOT STRIP OUT H9 SCREWS.
FIGURE 4
DETAIL C
DETAIL B
P10
H8
P11
H9
H9
P11
H9
P10
H8
NOTICE:
秋月春风。一壶浊酒喜相逢，古今多
NOTICE:
MAKE SURE TWO LEG PANELS ARE
ALIGNED AND FLAT BEFORE ATTACHING
NOTICE:
秋月春风。一壶浊酒喜相逢，古今多
NOTICE:
MAKE SURE TWO LEG PANELS ARE
ALIGNED AND FLAT BEFORE ATTACHING

- 7 -
PARTS REQUIRED
8 pcs - P7 Triangle Leg Support Block 32 pcs - H2 8.5mm x 20mm Flat Washer 1 pc - T2 13mm Wrench
8 pcs - H4 8mm x 80mm Hex Head Bolt 16 pcs - H3 M8 Nylock Nut 1 pc - T3 14mm Wrench
8 pcs - H6 8mm x 130mm Hex Head Bolt 16 pcs - H5 M8 Lock Washer
STEP 5:
Attach leg assembly from STEP 4 onto the table table tennis frame
using P7 Triangle Leg Support Blocks with H4 Bolts, H6 Bolts,
H5 Lock Washers, H2 Flat Washers and H3 Nylock Nuts as shown
in FIGURE 5, DETAIL D and DETAIL E.
DO NOT TIGHTEN H4 & H6 BOLTS
ON THIS TIME.
FIGURE 5
P7
(Triangle Leg
Support Block)
P7
(Triangle Leg
Support Block)
H2 H5 H6H2H3
H2 H3
H2H5H4
DETAIL E
DETAIL D
PARTS REQUIRED
2 pcs - P8 Long Side Leg Support Panel 32 pcs - H2 8.5mm x 20mm Flat Washer 1 pc - T2 13mm Wrench
2 pcs - P9 Short End Leg Supoort Panel 16 pcs - H3 M8 Nylock Nut 1 pc - T3 14mm Wrench
4 pcs - P12 Leg Leveler 16 pcs - H5 M8 Lock Washer
16 pcs - H7 8mm x 55mm Hex Head Bolt
STEP 6:
Attach P8 Long Side Leg Support Panels and P9 Short End Leg Supoort Panels to Legs using H7 Bolts, H5 Lock Washers, H2 Flat
Washers and H3 Nylock Nuts as shown in FIGURE 6, DETAIL F and DETAIL G.
TIGHTEN ALL H4 & H6 (FROM STEP 5) AND H7 BOLTS ON THIS TIME.
Thread P12 Leg Levelers on the Legs as shown in FIGURE 6.
P12
H7 H5 H2
H2 H3
P9
P9
(Short End Leg
Support Panel)
P8
(Long Side Leg
Support Panel)
P9
(Short End Leg
Support Panel)
H2 P8H3
H2 H5 H7
DETAIL F DETAIL G
FIGURE 6

- 8 -
STEP 7:
Attach P13 Net Posts and P14 Net as shown in FIGURE 7.
FIGURE 7
PARTS REQUIRED
2 pcs - P13 Net Post
1 pc - P14 Net
CAUTION:
AT LEAST FOUR OR MORE ADULTS ARE NEEDED TO LIFT
AND ROTATE THIS TABLE INTO PLAYING POSITION.
P13
P14
P14
P13
T8530 TABLE TENNIS TABLE SPARE PARTS
Key# Part Description Qty
H1 T8530SYH1 8 mm x 65 mm
Hex Head Bolt 4
H2 T8530SYH2 8.5 mm x 20 mm
Flat Washer 72
H3 T8530SYH3 M8 Nylock Nut 36
H4 T8530SYH4 8 mm x 80 mm
Hex Head Bolt 8
H5 T8530SYH5 M8 Lock Washer 36
H6 T8530SYH6 8 mm X 130 mm
Hex Head Bolt 8
H7 T8530SYH7 8 mm x 55 mm
Hex Head Bolt 16
H8 T8530SYH8 3.5 mm x 20 mm
Phillips Round Head Screw 16
H9 T8530SYH9 3.5 mm x 14 mm
Phillips Round Head Screw 16
H10 T8530SYH10 4 mm x 63 mm
Phillips Round Head Screw 28
H11 T8530SYH11 6 mm x 35 mm
Allen Head Bolt 12
H12 T8530SYH12 6.5 mm x 18 mm
Flat Washer 12
Key# Part Description Qty
T1 T8530SYT1 Allen Wrench 1
T2 T8530SYT2 13 mm Wrench 1
T3 T8530SYT3 14 mm Wrench 1
P1 T8530SYP1 Half Table Tennis
Table Assembled 2
P2 T8530SYP2 Left Leg Side Panel 2
P3 T8530SYP3 Right Leg Side Panel 2
P4 T8530SYP4 Left Leg Front Panel 2
P5 T8530SYP5 Right Leg Front Panel 2
P6 T8530SYP6 Cross Support Tube 2
P7 T8530SYP7 Triangle Leg
Support Block 8
P8 T8530SYP8 Long Side Leg Support
Panel 2
P9 T8530SYP9 Short End Leg Support
Panel 2
P10 T8530SYP10 Triangle Leg End Cap 4
P11 T8530SYP11 Leg Support Bracket 4
P12 T8530SYP12 Leg Leveler 4
P13 T8530SYP13 Net Post 2
P14 T8530SYP14 Net 1
K1 T8530SYK1 Hardware Kit 1
M1 T8530SYM1 Owner’s Manual 1
WARNING:
DO NOT CLIMB, STAND OR JUMP ON TABLE!
SERIOUS OR FATAL INJURY MAY RESULT!
THIS IS NOT A TOY!

- 9 -
90 DAY LIMITED WARRANTY
This consumer warranty extends to the original consumer purchase of any ESCALADE SPORTS Product
(hereinafter referred as the “Product”).
WARRANTY DURATION: This Product is warranted to the original consumer purchase of a period of
ninety (90) days from the original purchase.
WARRANTY PERFORMANCE: During the above ninety (90) day warranty period, ESCALADE SPORTS shall
repair or replace withacomparable model, and Product, or component thereof, which may prove
defective under normal use and proper care, and which our examination shall disclose to our
satisfaction to be thus defective, please contact our Warranty Dept.
R
WARRANTY COVERAGE: ESCALADE SPORTS warrants to the original Consumer Purchaser that any
Product of its manufacture is free from defects in material and workmanship when used for the intended
purpose under normal use and conditions. THIS WARRANTY IS VOID IF THE PRODUCT HAS BEEN DAMAGED
BY ACCIDENT, UNREASONABLE USE, NEGLIGENCE, IMPROPER SERVICE, FAILURE TO FOLLOW INSTRUCTIONS
PROVIDED WITH THE PRODUCT OR OTHER CAUSES NOT ARISING OUT OF DEFECTS IN MATERIAL AND
R
WORKMANSHIP.
R
1-800-467-1421 / Warranty Dept.
Or Write us at:
Escalade Sports, Inc. - P.O. Box 889, Evansville, IN 47706 - Attn: Warranty Dept.
Or E-mail us at:
[e-mail]
Other than shipping requirements no charge will be made for such repair or replacement of in-warranty
Produts. ESCALADE SPORTS strongly recommends that the Product is insured for value prior to mailing.
R
R
WARRANTY DISCLAIMERS: ANY IMPLIED WARRANTIES ARISING OUT OF THIS SALE, INCLUDING BUT NOT
LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
ARE LIMITED IN DURATION TO THE ABOVE NINETY (90) DAY WARRANTY PERIOD. ESCALADE SPORTS SHALL
NOT BE LIABLE FOR LOSS OF USE OF THE PRODUCT OR OTHER CONSEQUENTIAL OR INCIDENTAL COSTS,
EXPENSES OR DAMAGES INCURRED BY THE CONSUMER OF ANY OTHER USE.
R
Some states do not allow the exclusion or limitation of implied warranties or consequential or incidental
damages, so the above limitations or exclusions may not apply to you.
LEGAL REMEDIES: This warranty give you specific legal rights and you may also have other rights which
may vary from state to state.
NOT COVERED BY THIS WARRANTY:
- Product not intended to be in places of public assembly, such as, but not limited to, schools, parks,
public or private recreational facilities.
- Any product subjected to Non-residential abuse, negligence, improper installatin, vandalism, acts
of God, alteration of product, or any other events beyond the control of ESCALADE SPORTS.