STILFORD STDMRFWE User manual

ASSEMBLY INSTRUCTIONS
This design and instruction booklet is subject to copyright.
4 Carton
www.officeworks.com.au
STILFORD DUAL MOTOR ELECTRIC HEIGHT ADJUSTABLE
2 PIECE CORNER WORKSTATION
1/18
WEIGHT
CAPACITY
120
FRAME: STDMDFWE/ STDMDFBK/ STDMRFWE/ STDMRFBK
DESKTOP: S2EDT157/ 187WE, WO, WB, OA, WN
S2ERT756/106 WE, WO, WB, OA, WN
For spare parts or hardware call 1300 OFFICE(1300 633 423).

Furniture Assem bly Ins c
Estimated Assembly Time:
Assembly Video
•To view an assembly video, go to https://www.officeworks.com.au/
•Search the product by item code or name:
•Click on the icon to watch the video.
70minutes
Furniture Assem bly Ins c
Estimated Assembly Time: 50minutes
2/18
Customer Service Contact Details
Spare Parts & Hardware
1300 OFFICE
People Required
General Advice
(1300 633 423).

2 of 62 of 6
2 of 72 of 72 of 7
3/18
Tools Required
CAUTION: Do not use tools other than those required, as this
can damage your new item.
Officeworks Ltd. | 236-262 East Boundary Road | Bentleigh East VIC 3165 | AUSTRALIA
NOTE
•Please check you have all hardware before assembling.
•
Please ensure you have the name of the item, required hardware part and quantity.
Please retain your receipt as proof of purchase to validate your warranty.
•
•
CAUTION
•Do not tighten screws before all screws are in the right place.
•Do not use this product unless all bolts and screws are firmly secured.
•Check that all bolts and screws are securely tightened at least every 4 months.
WARNING
•If parts are missing, broken, damaged or worn, stop using the product until all repairs
are made using manufacturer authorised parts.
•Failure to follow these warnings could result in serious injury.
DANGER
•CHILDREN MUST BE SUPERVISED.
If you are missing any hardware, please contact 1300 OFFICE (1300 633 423).

Safety and Warnings
•Thistablecomplieswiththeprescribedsafetyregulations.Inappropriateusemaycausedamage to personsand
table.
•Pleasereadtheoperationmanualprior to startusingthetable. It providesyouwithimportantinformation
aboutsafety,use,installation and maintenance of thetable,andthusprotectingyouandyourchildrenandavoiding
damage on thetable.
•Pleaseguardthisoperationmanualandpass it on to anyfutureowner!
•70kgweightneed uniformdistribution on thetop.
•Do notplaceanyobjectsabove cm underneaththetable.
•In memoryfunctionsetting, 1 cm errors is allowablewiththemeasurements.
•
•Theappliance is only to be usedwiththeunitprovided(Powersupply).
Usage
Theelectromotive,height-adjustabletablesaredesignedforworkstations in dryworkenvironmentsonly.Thetableheight is infinitely
adjustable, so that it can be set to themostergonomicallysuitableworkinglevel.
Theyhavenotbeendesignedforotherpurposesthanthoseincluded in thismanual,e.g.theyarenot to be used in areas of highhumidity
or dampness, norforliftingpeople.
Anyotheruse is at one’sownrisk!
Liability:Themanufactureracceptsunder no circumstanceswarrantyclaims or liabilityclaimsfordamagesarisingfromimproperuse or
handling of thetableframeotherthanthatdescribed in thisoperationmanual.
Do not crawl, lie or move around under the table frame, and do not sit or stand on the table frame.
62
120
4/18

5/18
This Assembly instruction covers both 1500mm and 1800mm sizes
1
2pcs
7
2pcs 1pc 1pc
73756
74
Parts Located in Carton -
1pc
77
1pc
72
2pcs
STDMDFWE,STDMDFBK
Attention:
Do not tighten the screws before all of
the screws are in the correct place.
Spare Parts number -
1pc
75
HWSTDMDFTR Spare Parts number -
6
1pc
HWSTDMDFCP

6/18
This Assembly instruction covers both 1500mm and 1800mm sizes
1pc
797
10 11
78
Parts Located in Carton -
1pc
1pc
STDMRFWE,STDMRFBK
1pc
Parts Located in Carton
1pc1pc
Attention:
Do not tighten the screws before all of
the screws are in the correct place.
- S2ERT756/106 WE,WO,OA,WB,WN
Parts Located in Carton-
1pc
S2EDT157/187 WE,WO,WB,OA,WN

7/18
Hardware located in carton-STDMDFWE,STDMDFBK
Hardware Spare Parts number -HWSTDMDFMO

8/18
Hardware located in carton-STDMRFWE,STDMRFBK
Hardware Spare Parts number - HWSTDMRFMO

Step 1
9/18
Loosen the screws before unfolding the legs.
Fasten once legs are unfolded.
Please ensure the longer part of the leg is facing
the same direction as the front of the desk.
Front

Step 2 Beam adjustment for 1800mm
10/18
PRE Assembled L=1400 for L shape 1500mm desk.
L=1700 for L shape 1800mm desk.
L
corner workstation as follow:
Front

Step 3
For the left hand side workstation.
11/18
The longer side of part 11 faces the front of the desk.
For right hand side workstation.
Loosen the screws before unfolding the leg.
Fasten once leg are unfolded.

Step 4
12/18
Pre-assembled L=1140 for L shape 1500mm desk.
L=1440 for L shape 1800mm desk.
L
Beam adjustment for 1800mm
corner workstation as follow:
Front

Step 5 Remove this D screw from part 2 before using screw to
13/18
Left hand side assembly
Right hand side assembly
attach the corner frame to the straight desk frame.

Step 6
14/18

Step 7
15/18
-M1
-M2
-M3
6
Connect part 8 from the
return frame into M3.

16/18
Step 8
Step 8
Before proceeding to the next steps, please ensure the frames are operating correctly and in sync.
3. If the display doesn't show "2-3" and when pressing the up arrow the straight frame raises but the return
4. If "E10" is displayed power the desk off and complete Step 1 and 2 above.
as per Step 7. Then power on and complete Step 1 and 2 above.
frame doesn't raise immediately stop and disconnect the power and make sure all connections and correct
1. Press and hold up button for 1 second, will display "2-3". Press and hold the down
2. Display will show "067" and then press the up button until "072" is displayed for normal use.
button for 5 seconds to finish the learning process.

Step
17/18
First fasten the connectors
Part O,then fix B screws.
9

2 of 62 of 6
2 of 72 of 72 of 7
18/18
Warranty 15 years
Product Warranty – valid for Australian customers only
Officeworks Ltd warrants that this product will be free from defects and work as
If the product has any defects or does not work as intended during the Warranty Period,
This warranty does not apply:
-To cosmetic damage;
-To damage caused by consumables used in connection with the
-Where the product has not been used in accordance with all provided instructions;
-To damage arising from fair wear and tear;
-Where the product has not been subject to reasonable use;
-Where the product has been intentionally or negligently damaged; and/or
if the customer has attempted to repair the product.
To make a claim under this warranty, please return your product with your receipt or
This warranty is provided in addition to any rights you may be entitled to under
Our goods come with guarantees that cannot be excluded under the Australian
intended for 15 years from the date of purchase by the original customer.
Officeworks will, at its election and at its expense, repair or replace the product.
product (such as cleaning products);
proof of purchase to your nearest Officeworks store or contact 1300 633 423.
the Competitions & Consumer Act 2010.
entitled to a replacement or refund for a major failure and
entitled to have the goods repaired or replaced if the goods fail to be of acceptableloss or damage. You are also
quality and the failure does not amount to a major failure.
Consumer Law. You are
compensation for any other reasonably foreseeable
Thank you for your purchase. Please retain your receipt to validate warranty.
If you would like to know more about our furniture products, please visit www.officeworks.com.au