stilum silva 2 User guide

© stilum GmbH, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved State: 16.02.2018 p. 1
Mounting instruction large play equipment „silva 2“
Item-No. 51 5521 601
Diagram 1: Overall view of play equipment with description of individual elements
climbing arc
House
climbing eye
Wobble bridge
slide
post
sliding bar

© stilum GmbH, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved State: 16.02.2018 p. 2
Mounting instruction large play equipment „silva 2“
Item-No. 51 5521 601
1. Select the play equipment location in consideration of the required safety
area (see Diagram 3: 8400x7000mm).
2. Carry out excavation work for 6 foundations as shown in Diagram 2.
After excavation, compress the foundation oor.
Note: Cover the foundation holes with the safety cover required for the height
of fall indicated.The combination equipment is built in on the play level. Pay
attention to items marked „game level” of play equipment!
3. Setup the two main foundations (LxBxH 1400x1400x300mm), and the foun-
dations for climbing eye, sliding bar and climbing arc (LxBxH 600 x 600 x
300mm), the foundation for the slide (LxBxH 1000x600x300mm) acc. to the
dimensions indicated in diagram 2a and 2b the quality class C 20/25 with
horizontal reinforcement.
4. After a setting period of 10-14 days, depending on weather conditions and
foundation size - clean the surface of the foundations and start with the instal-
lation of the combination equipment.
Diagram 2a: Rear view with dimension details „silva 2“
3500
8400
7000
1800
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
Oberflächen nach DIN ISO 1302 Reihe 2
Zul. Abweichung DIN 2768 - mH
1
silva 1
Benennung
Gepr.
Werkstoff
Blatt
Datum
Projekt
Gez.
Zuschnitt
Zeichnungsnummer
Rev Änderung Datum
1:50
A3
Gewicht
Name
Name
Draufsicht
1016-00-00
712.6
Maßstab
Behnke 24.03.2017
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
Diagram 3: Minimum space
Reinforcement plan:
Concrete foundation with reinforcement
Main foundation: BSt 500S
Ever 4 stirrups Ø 8 mm lengthwise and cross
Concrete cover h´= 3 cm
Concrete quality class C 20/25
Foundations for attachment parts are no-reinforced
300 450
Füllung
filling
Erde/Grund
Ground
Beton
Concrete
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
Oberflächen nach
DIN ISO 1302
Reihe 2
Zul. Abweichung
DIN 2768 - mH
2
silva2
Benennung
Gepr.
Werkstoff
Blatt
Datum
Projekt
Gez.
Zuschnitt
Zeichnungsnummer
Rev Änderung Datum
1:30
A3
Gewicht
Name
Name
Fundamentplan
1017-00-00
13938.4 Maßstab
Behnke 24.03.2017
A Rechteckanbdg.Fuß gedreht 21.12.17 ES
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
300 450
Füllung
filling
Erde/Grund
Ground
Beton
Concrete
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
Oberflächen nach
DIN ISO 1302
Reihe 2
Zul. Abweichung
DIN 2768 - mH
2
silva2
Benennung
Gepr.
Werkstoff
Blatt
Datum
Projekt
Gez.
Zuschnitt
Zeichnungsnummer
Rev Änderung Datum
1:30
A3
Gewicht
Name
Name
Fundamentplan
1017-00-00
13938.4 Maßstab
Behnke 24.03.2017
A Rechteckanbdg.Fuß gedreht 21.12.17 ES
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland

© stilum GmbH, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved State: 16.02.2018 p. 3
Mounting instruction large play equipment „silva 2“
Item-No. 51 5521 601
Diagram 2b: Top view with foundations „silva 2“
Foundation
5. Place the premounted construction of the posts as described in dia-
gramm 4b and 2b on the foundation.
Note: Do not screw the base plates onto the foundations yet!
6. Place the pre-mounted house on the connection plate. The connection
elements for the wobble bridge have to face each other. The closed walls
have to be on the outside. Fix it.
7. Connect the climbing eye, the sliding bar, the slide and the climbing arc
with the towers as described in diagram 1 and 4b and x it (screws inclu-
ded in delivery).
8. Mount the wobbly bridge with the towers at the intended locations. Ple-
ase fasten the parts using the shackles (18 pcs.) including in the delive-
ry.
9. Align the play equipment more on the foundations.
Note: Avoid sagging of the wobbly bridge.
10. Drill holes into all foundations and screw the play equipment into the
foundations with the included heavy-duty dowels.
11. Fill up and compress the holes between the foundation and the foundati-
on hole with the excavation.
12. Seal the foundation with the safety cover required for the height of fall
indicated.
Critical drop height: 1500 mm.
Recommended surface material: sand, wood chip, gravel, synth. fall
protection.
13. Do not allow children to use the equipment before the installation has
been nished.
14. After 3 months, check the screws at the joints and retighten them if
necessary.
300
950
A A
1280 1400
305 600
335 600
17801400 1400
3500
600
600
910
1400 1588
600
1000
320
600
600335
120
280
A-A
Füllung
filling
Erde/Grund
Ground
Beton
Concrete
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
Oberflächen nach
DIN ISO 1302
Reihe 2
Zul. Abweichung
DIN 2768 - mH
1
silva2
Benennung
Gepr.
Werkstoff
Blatt
Datum
Projekt
Gez.
Zuschnitt
Zeichnungsnummer
Rev Änderung Datum
1:30
A3
Gewicht
Name
Name
Fundamentplan
1017-00-00
13938.4 Maßstab
Behnke 24.03.2017
A Rechteckanbdg.Fuß gedreht 21.12.17 ES
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland

© stilum GmbH, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved State: 16.02.2018 p. 4
Mounting instruction large play equipment „silva 2“
Item-No. 51 5521 601
Addition of the single elements
Diagram 4b: climbing arc, climbing eye, slide, sliding bar
Diagram 4a: wobble bridge
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
Oberflächen nach
DIN ISO 1302
Reihe 2
Zul. Abweichung
DIN 2768 - mH
1
silva 1
Benennung
Gepr.
Werkstoff
Blatt
Datum
Projekt
Gez.
Zuschnitt
Zeichnungsnummer
Rev Änderung Datum
1:10
A3
Gewicht
Name
Name
Fundamentplan
1016-00-00
13888.6 Maßstab
x xx.xx.xx
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland

© stilum GmbH, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved State: 16.02.2018 p. 5
Mounting instruction large play equipment „silva 2“
Item-No. 51 5521 601
Attention: If the play equipment has been incompletely installed or partly dis-
mantled when carrying out maintenance and repair work, this may lead to
particular risks of injury for the user. For this reason, make clearly visible that the
equipment shall not be used in such cases.
NOTE: Play equipment, which contain components made of stainless steel
should not come with „normal“ steel parts in contact. Those steel parts may rub
off and leave small steel particles in combination with moisture brown rust stains.
If such corrosion occur on stainless steel parts, they are ne to remove with an
abrasive (240 grit).
Please take care when transporting and setting up the fact that the components
are made of stainless steel with no „normal“ steel parts in contact.
In order to preserve a good visual appearance of your stilum playground equip-
ment over a long period one should take care of maintenance of the stainless
surface even despite of their corrosion resistance. Especially areas, which can
not be reached by rainfall, should be frequently cleaned from dirt and deposits
due to air pollution and dirt caused by the atmosphere. Light soiling can easily be
removed by using a high pressure cleaner. For persistent deposits use a clean
cloth moistened with a special liquid cleaner (e.g. on phosphoric acid) and rinse
off with clear water after a short application time. During cleaning with mild abra-
sive components, only wipe over stainless steel surface in polishing direction. For
heavily soiled surfaces, polishes can be used (e.g. for cleaning chrome on cars)
or for greasy and oily dirt alcoholic cleaning agents and solvents (e.g. ethyl alco-
hol, isopropyl alcohol or acetone). However, it should be noted that the dissolved
soiling is not spread over the surface again. Do not use any chloride or hydro-
chloric containing cleaning products nor scouring powder, bleaching - or silver
polish cleaner. Cleaning intervals depend on type and degree of soiling as well as
on demands made on optical characteristics. Therefore cleaning is advisable at
intervals of six to twelve months – whereby in
the case of strong soiling it is appropriate to clean the playground equipment at
intervals of 3 to 6 months.
MAINTENANCE OF WOODEN ELEMENTS
To ensure a long life of stilum playground equipment, wooden surfaces should be
regularly re-glazed. This provides the wooden surfaces with the necessary protec-
tion and preserves the look. Areas which are not exposed to rain should be regularly
freed from deposits.
The cleaning intervals depend on the degree and type of soiling as well as on the
exigencies on cleanliness. It is recommended to clean and / or glaze at every 6 to 12
months, or to shorten the cleaning interval to 3 to 6 months if the wheather condi-
tions are bad.
LASUR APPLICATION
Use a soft and at brush or / and a glaze application roll to paint.
The wood should be cleaned a few hours before glazing. That can be done with mild
javel water, which should in any case be rubbed off afterwards. For resistant dirt use
a wood cleaner. Eventually a light abrasion is necessary. If water-based detergents
are used for cleaning, please ensure that the wood elements are thoroughly dried
before the glazing is done.
Always brush in one direction, so that the glaze can spread evenly. Apply very thinly!
Remove glaze with a soft cotton cloth.
Then let the freshly glazed wood dry for at least one day and prohibit the use of the
equipment for this duration.