stilum Ascendo 1A User manual

© stilum GmbH, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved State: 09.08.2019 p. 1
Mounting instructions for multiplay equipment
„ascendo 1A“ Robinia
Item-No. 517501601
sliding bow
tower
climbing slant
reman‘s pole
Diagram 1: Overall view of play equipment with description of individual elements
climbing net

© stilum GmbH, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved State: 09.08.2019 p. 2
Mounting instructions for multiplay equipment
„ascendo 1A“ Robinia
Item-No. 517501601
1. Select the play equipment location in consideration of the required safety
area (see diagram 3: 7500 x 5200mm).
2. Carry out excavation work for foundations as shown in diagram 2. After exca-
vation, compress the foundation oor.
Note: The combination equipment is built in on the play level. Pay attention
to items marked „play level” of play equipment!
3. Set up the 2 main concrete foundations (U-form) and the smaller founda-
tions (sliding bow and the climbing slant) acc. to the dimensions indicated in
diagram 2.
4. After a setting period of 10-14 days, depending on weather conditions and
foundation size - clean the surface of the foundations and start with the instal-
lation of the combination equipment.
5. Place the tower as shown in diagram 2 at the main foundations and do a
rough aligning. Please take care that the connections for the climbing net are
positioned at the bigger foundation. Rotate the robinia posts so, that there is
a distance of ≤89mm between the stainless steel tube on the platform and
the robinia post, to avoid traps.
Note: Do not screw the base plates onto the foundations yet!
Diagram 2: Foundation plan with dimension details „ascendo 1A“ Robinia
Reinforcement plan:
Concrete foundation with reinforcement
Main foundation: BSt 500S
Ever 4 stirrups Ø 8 mm lengthwise and cross
Concrete cover h´= 3 cm
Concrete quality class C20/25-C25/30
4682
450400
850
2921
A A
600
600
600
625
500
800
1050
400
1850
1750
1750
2285
800
550
875
300
A-A
2147
450
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
Oberflächen nach
DIN ISO 1302
Reihe 2
Zul. Abweichung
DIN 2768 - mH
1
ascendo 1A
Benennung
Gepr.
Werkstoff
Blatt
Datum
Projekt
Gez.
Zuschnitt
Zeichnungsnummer
Rev Änderung Datum
1:30
A3
Gewicht
Name
Name
Fundamentplan
1026-00-00
511.4 Maßstab
Mattheis
28.03.17
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
Beton
Concrete
Füllmaterial
Filling
Erde
Ground
Legende

© stilum GmbH, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved State: 09.08.2019 p. 3
Mounting instructions for multiplay equipment
„ascendo 1A“ Robinia
Item-No. 517501601
6. Connect the climbing net with the tower at the intended location and
place the at steel on top of the foundation. Please fasten the parts
using the screws including in the delivery.
7. Place the climbing slant at the shafts and x it with the screws and the
adapter for the pipes which are included in the delivery (diagram 4a).
8. Connect the climbing bow and the reman‘s pole according to diagram
4b at the adapters and screw it.
9. Align the whole play equipment once more at the foundation and take
care that every base plate is positioned in the center of the foundation.
10. Drill holes into all foundations and screw the play equipment into the
foundations with the included heavy-duty dowels.
11. Fill up and compress the holes between the foundation and the found-
ation hole with the excavation.
12. Seal the foundation with the safety cover required for the height of fall
indicated acc. to EN 1176-1.
Critical drop height: 1700 mm.
Recommended surface material: sand, wood chip, gravel, synth. fall
protection.
13. Do not allow children to use the equipment before the installation has
been nished.
14. After 3 months, check the screws at the joints and retighten them if
necessary.
5200
7500
1500 1718
1500
1554
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
Oberflächen nach
DIN ISO 1302
Reihe 2
Zul. Abweichung
DIN 2768 - mH
1
ascendo 1A
Benennung
Gepr.
Werkstoff
Blatt
Datum
Projekt
Gez.
Zuschnitt
Zeichnungsnummer
Rev Änderung Datum
1:30
A3
Gewicht
Name
Name
Draufsicht
1026-00-00
510.3 Maßstab
Mattheis 29.03.17
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
Diagram 3: Minimum space

© stilum GmbH, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved State: 09.08.2019 p. 4
Mounting instructions for multiplay equipment
„ascendo 1A“ Robinia
Item-No. 517501601
Diagram 4b: connection of the reman‘s
pole and the sliding bow
pipe adapter
Diagram 4a: Connection of the
climbing slant
Rev.:
Projekt:
BESTELL-NR:
ZG-NR:
BENENNUNG:
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI + KAISER GMBH DARF DIESE TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT
NOCH DRITTEN MITGETEILT ODER ZUGÄNGLICH GEMACHT WERDEN NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VERWENDET
WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
FREIG:
GEPR:
GEZ:
DATUM: NAME:
WERKSTOFF

MAßSTAB:
OBERFLAECHEN NACH
DIN ISO 1302 REIHE 2
ZUL. ABWEICHUNG
DIN 2768 - mH
+0,3
-0,3
WERKSTUECKKANTEN
NACH DIN 6784
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
A3
0201-00-00
29.04.2016
Abmaße:
Fertigung:
x
x
Gewicht:
1573587.9
ascendo robinie2
Rev.:
Projekt:
BESTELL-NR:
ZG-NR:
BENENNUNG:
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI + KAISER GMBH DARF DIESE TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT
NOCH DRITTEN MITGETEILT ODER ZUGÄNGLICH GEMACHT WERDEN NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VERWENDET
WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
FREIG:
GEPR:
GEZ:
DATUM: NAME:
WERKSTOFF

MAßSTAB:
OBERFLAECHEN NACH
DIN ISO 1302 REIHE 2
ZUL. ABWEICHUNG
DIN 2768 - mH
+0,3
-0,3
WERKSTUECKKANTEN
NACH DIN 6784
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
A3
0201-00-00
29.04.2016
Abmaße:
Fertigung:
x
x
Gewicht:
1573590.1
ascendo robinie2
Attention: If the play equipment has been incompletely installed or partly
dismantled when carrying out maintenance and repair work, this may lead
to particular risks of injury for the user. For this reason, make clearly visible
that the equipment shall not be used in such cases.
STAINLESS STEEL
NOTE: Play equipment, which contain components made of stainless steel
should not come with „normal“ steel parts in contact. Those steel parts
may rub off and leave small steel particles in combination with moisture
brown rust stains.
MAINTENANCE: If such corrosion occur on stainless steel parts, they are
ne to remove with an abrasive (240 grit).
Please take care when transporting and setting up the fact that the compo-
nents are made of stainless steel with no „normal“ steel parts in contact.
In order to preserve a good visual appearance of your stilum playground
equipment over a long period one should take care of maintenance of the
stainless surface even despite of their corrosion resistance.
Especially areas, which can not be reached by rainfall should be frequently
cleaned from dirt and deposits due to air pollution and dirt caused by the
atmosphere.
Light soiling can easily be romoved by using a high pressure cleaner.
For persistent deposits use a clean cloth moistened with a special liquid
cleaner (e.g. on phosphoric acid) and rinse off with clear water after a short
application time. During cleaning with mild abrasive components, only wipe
over stainless steel surface in polishing direction.

© stilum GmbH, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved State: 09.08.2019 p. 5
Mounting instructions for multiplay equipment
„ascendo 1A“ Robinia
Item-No. 517501601
For heavily soiled surfaces, polishes can be used (e.g. for cleaning chrome on cars)
or for greasy and oily dirt alcoholic cleaning agents and solvents (e.g. ethyl alcohol,
isopropyl alcohol or acetone).
However, it should be noted that the dissolved soiling is not spread over the surface
again.
Do not use any chlorid or hydrochloric containing cleaning products nor scouring
powder, bleaching - or silver polish cleaner. Cleaning intervals depend on type and
degree of soiling as well as on demands made on optical characteristics. Therefore
cleaning is advisable at intervals of six to twelve months – whereby in the case of
strong soiling it is appropriate to clean the playground equipment at intervals of three
to six months.
WOOD
NOTE: For all play equipment with wooden elements, it cannot be ruled out that dry
cracks may develop. These natural changes of wood are dependent on climate con-
ditions as well as on the age and usage of the play equipment. Longer dry periods
may lead to more dry cracks.
This development, however, does not represent a quality defect. Static properties of
the equipment are not impaired.
See EN 1176 Bbl 1:2019-01 4.2.7.6: Dry cracks in wood elements as a consequence
of weather conditions are not to be considered as dangerous openings in terms
of the standard due to the fact that the shape of the cracks (tapering towards the
inside) makes it almost impossible for ngers to get trapped in them.
MAINTENANCE: To ensure a long life of stilum playground equipment, wooden
surfaces should be regularly re-glazed. This provides the wooden surfaces with the
necessary protection and preserves the look. Areas which are not exposed to rain
should be regularly freed from deposits.
The cleaning intervals depend on the degree and type of soiling as well as on the
exigencies on cleanliness. It is recommended to clean and / or glaze at every 6
to 12 months, or to shorten the cleaning interval to 3 to 6 months if the wheather
conditions are bad.
LASUR: Use a soft and at brush or / and a glaze application roll to paint.
The wood should be cleaned a few hours before glazing. That can be done with
mild javel water, which should in any case be rubbed off afterwards. For resistant
dirt use a wood cleaner. Eventually a light abrasion is necessary. If water-based de-
tergents are used for cleaning, please ensure that the wood elements are thorough-
ly dried before the glazing is done.
Always brush in one direction, so that the glaze can spread evenly. Apply very
thinly!
Remove glaze with a soft cotton cloth.
Then let the freshly glazed wood dry for at least one day and prohibit the use of the
equipment for this duration.