Stirling GYJ70-78F3E User manual

Model Number GYJ70-78F3E
N13275
6.5kg Clothes Dryer
INSTRUCTION MANUAL
AFTER SALES SUPPORT
1300 886 649
[email protected]
AUS MODEL: GYJ70-78F3E PRODUCT CODE: 48141 06/2015
IM Version No: V1.4 Issue Date: 16 December 2014

2
AFTER SALES SUPPORT
1300 886 649
[email protected]
AUS MODEL: GYJ70-78F3E PRODUCT CODE: 48141 06/2015
Welcome
Congratulations on choosing to buy a STIRLING®product.
All products brought to you by STIRLING®are manufactured to the highest standards
of performance and safety and, as part of our philosophy of customer service and
satisfaction, are backed by our comprehensive 3 Year Warranty. We hope you will
enjoy using your purchase for many years to come.

3
AFTER SALES SUPPORT
1300 886 649
[email protected]
AUS MODEL: GYJ70-78F3E PRODUCT CODE: 48141 06/2015
Contents
02 Welcome
04 Warranty Details
05 General Safety Instructions
08 Product Overview
10 Getting Started: Installation
15 Instructions
18 FAQs
19 Other Useful Information
23 Repair and Refurbished Goods or Parts Notice

4
AFTER SALES SUPPORT
1300 886 649
[email protected]
AUS MODEL: GYJ70-78F3E PRODUCT CODE: 48141 06/2015
Warranty Details
The product is guaranteed to be free from defects in workmanship and parts for
a period of 36 months from the date of purchase. Defects that occur within this
warranty period, under normal use and care, will be repaired, replaced or refunded at
our discretion, solely at our option with no charge for parts and labour. The benefits
conferred by this warranty are in addition to all rights and remedies in respect
of the product that the consumer has under the Competition and Consumer Act
2010 and similar state and territory laws.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and to compensation for any other reasonably foreseeable loss or damage. You
are also entitled to have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major failure.
6.5kg Clothes Dryer
YEAR IN HOME
WARRANTY
3

5
AFTER SALES SUPPORT
1300 886 649
[email protected]
AUS MODEL: GYJ70-78F3E PRODUCT CODE: 48141 06/2015
General Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
Read this manual thoroughly before first use, the safety precautions enclosed herein
reduce the risk of fire, electric shock and injury when correctly adhered to. Keep the
manual in a safe place for future reference, along with the completed warranty card
and purchase receipt. If applicable, pass these instructions on to the next owner.
Always follow basic safety precautions and accident prevention measures when
using an electrical appliance, including the following:
Electrical safety and cord handling
• Voltage: Make sure your outlet voltage and circuit frequency correspond to the
voltage indicated on the appliance rating label and your outlet socket is properly
earthed. If this is not the case, do not use the dryer.
• Separate circuit: We strongly recommend you connect the appliance to a separate
circuit serving only this appliance. This provides the best performance and prevents
overloading the house wiring circuits that could cause a fire hazard from overheating.
• Electrical hazard: Do not insert any objects into the appliance.
• No extension cord: Do not use this appliance with a power adaptor or extension
cord. CAUTION: If such a device must be used, the cord or outlet device must be
positioned so that it is not subject to splashing or ingress of moisture.
• Protect the power cord. Do not kink or damage the power cord. Position the cord
out of the way so no one steps on or places anything on the cord or against it. Do
not run the cord under floor coverings. Arrange the cord away from traffic areas
where it will not become a trip hazard.
• Damage: Do not operate the appliance after it malfunctions or has been dropped
or damaged. In case of damage, contact the after sales support line for advice.
• Damaged cord: If the power supply cord is damaged, do not attempt to change
it yourself. A damaged cord or plug must be replaced by the manufacturer or a
qualified person in order to avoid a hazard.
• Disconnect: Unplug the clothes dryer from the power supply after use, before
cleaning, servicing or moving the appliance. To disconnect, turn the appliance off,
switch off the power outlet and remove the plug from the power outlet. Grip the
plug when disconnecting; do not pull on the cord. After disconnection, wait at least
2 minutes before turning the appliance back on again.
• RCD: Unless your home is already fitted with a residual current device (safety
switch), we recommend installing an RCD with a rated residual operating current
not exceeding 30mA to provide additional safety protection when using electrical
appliances. See your electrician for professional advice.
Usage conditions and restrictions
• Domestic use only: This appliance is intended for indoor household use only.
Do not use it outdoors. Do not use it for anything other than its intended purpose
(drying domestic quantities of washing), and only use it as described in this manual.

6
AFTER SALES SUPPORT
1300 886 649
[email protected]
AUS MODEL: GYJ70-78F3E PRODUCT CODE: 48141 06/2015
General Safety Instructions (Cont.)
• Usage restriction: The appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
• Children: Supervise young children to ensure they do not play with the dryer. Close
supervision is necessary when any appliance is used by or near children.
• Installation requirements: Do not install the appliance in a tight fitting cabinet.
Do not install it near heat sources such as radiators, heaters, air ducts or direct
sunlight. If the clothes dryer is not wall-mounted, place it on a flat, firm, dry and
stable floor in a well ventilated area. Use the adjustable legs to assist in levelling the
dryer if required. Do not place it on any soft material such as foam or plastic.
• Ventilation: Do not block any ventilation openings. Ensure that vents are not
covered by newspapers, tablecloths, curtains, carpet, etc.
• Before use: Make sure to remove transport packaging at the rear of the dryer.
WARNING: Before loading the dryer, always ensure no pet or young child has
climbed into it. Do not overload the clothes dryer.
• Suitability for tumble drying: Only load suitable items into the clothes dryer. See
the box on the opposite page for which items and materials are unsuitable for the
clothes dryer and may present a fire risk.
• Preparation: Make sure all pockets of clothing to be dried are empty. Hard, sharp
objects such as coins, safety pins, bra wires, nails, screws, lighters or matches
must be removed as they can cause extensive damage to the dryer.
WARNING: Any damage or malfunction resulting from foreign objects is not
covered by your warranty and may lead to expensive repairs.
• Noopenames:Do not place open flame sources such as candles on the dryer.
• Hot surface: The door window may be hot after a long drying cycle. Always ensure
children are kept away from the machine.
• Cool down: The final part of a clothes dryer cycle occurs without heat (cool down
cycle) to ensure that the items are left at a temperature that will not damage them.
Never stop the clothes dryer before the end of the drying cycle unless all items are
removed quickly and spread out so the heat is dissipated.
• Subsequent cycles: After turning off the power supply to the clothes dryer, wait at
least two minutes before turning it back on again.
• Repair: Except for the filters that require cleaning, this appliance contains no user-
serviceable parts inside. Do not attempt to open, disassemble or repair it yourself;
only have it serviced by qualified personnel, call the after sales support line.
• Liability: Improper use or installation may result in the risk of fire, electric shock
and/or injury. We assume no liability for any eventual damages caused by improper
use or handling, or by any other noncompliance with the instructions in this manual.

7
AFTER SALES SUPPORT
1300 886 649
[email protected]
AUS MODEL: GYJ70-78F3E PRODUCT CODE: 48141 06/2015
General Safety Instructions (Cont.)
CAUTION!
The items listed below are UNSUITABLE for clothes drying.
They can cause fire in the clothes dryer or extensive damage.
DO NOT place the following items into the clothes dryer.
:Items containing foam rubber (also known as latex foam) or similarly textured
rubber-like materials — when heated, these materials can spontaneously
combust and cause a fire.
:Items that have been spotted or soaked with cooking oil, or with highly flam-
mable substances — these substances constitute a fire hazard. Highly flam-
mable substances used in domestic environments include acetone, alcohol,
petrol, kerosene, some stain removers, dry-cleaning solvents, turpentine,
waxes, wax removers and some hair care products. (This also includes items
that have previously been cleaned or spotted with dry-cleaning solvents or
other flammable or explosive substances.)
Washing these items thoroughly beforehand in hot water with an extra amount
of detergent will reduce, but not necessarily eliminate the hazard. The ‘cool
down’ cycle of a clothes dryer should be used to reduce the temperature of the
items. They should not be removed from the clothes dryer or piled or stacked
while hot.
:Undergarments that contain metal reinforcements (such as underwire bras),
which can come loose during drying and damage the clothes dryer.
:Plastic articles such as shower caps or waterproof baby bibs.
:Rubber-backed articles, clothes fitted with foam rubber pads, pillows,
galoshes and rubber coated tennis shoes.
:Fabric softeners or similar products, unless they are specifically recommended
by the product manufacturer for use in a clothes dryer to eliminate the effects
of static electricity.
CAUTION!
• Do not use the tumble dryer if industrial chemicals have been used for cleaning.
• Do not dry unwashed items in the tumble dryer.
• Do not allow lint to accumulate around the tumble dryer. Clean the filter after every use.
• Adequate ventilation has to be provided to avoid the backflow of gases into the
room from appliances burning other fuels, including open fires.
Oil-affected items can ignite spontaneously, especially when exposed
to heat, such as in a clothes dryer. The items become warm, causing an
oxidation reaction in the oil. Oxidation creates heat. If the heat cannot
escape, the items can become hot enough to catch fire. Piling, stacking
or storing oil-affected items can prevent heat from escaping and so
create a fire hazard.

8
AFTER SALES SUPPORT
1300 886 649
[email protected]
AUS MODEL: GYJ70-78F3E PRODUCT CODE: 48141 06/2015
5 6
1 Door
2 Window
3 Control panel
4 Door gasket
5 Stainless steel drum
6 Exhaust connector
7 4 Wall-mounting notches
(on both sides, at the top and
bottom of the back panel)
Product Overview
1 2
4
3
Front view
Back view
7

9
AFTER SALES SUPPORT
1300 886 649
[email protected]
AUS MODEL: GYJ70-78F3E PRODUCT CODE: 48141 06/2015
14
10 12 1311
Product Overview (Cont.)
98
8 Air intake shroud
9 Air intake filter
10 Power button
11 Anti-Crease button
12 Programs button
13 Temperature button
14 Start/Pause button
Air intake
Control panel
Wall-mounting kit
Parts of the Wall-Mounting Kit
Part Illustration Quantity
Hanging brackets 2
Spacers 2
Exhaust Connector 1
12mm Screws 4
25mm Screws 4
16mm Screws 3
Additional Printed
Control Panel 1

10
AFTER SALES SUPPORT
1300 886 649
[email protected]
AUS MODEL: GYJ70-78F3E PRODUCT CODE: 48141 06/2015
Getting Started: Installation
Unpacking
• This product has been packaged to protect it against transportation damage.
When unpacking keep all packaging until you have made sure your new clothes
dryer is undamaged and in good working order. The carton is recyclable. Whenever
possible, reuse the carton and recycle it when disposing of the packaging materials.
• Plastic wrapping can be a suffocation hazard for babies and young children, so
ensure all packaging materials are out of their reach. Dispose of packaging safely.
• Make sure to remove the transport packaging at the rear of the clothes dryer.
• Inspect the cord and plug for damage or wear before each use. Do not use the
appliance if the appliance or its cord have been damaged or are not working
properly. In case of damage, contact our after sales support line.
• Read all instructions in this manual and make sure you understand all warnings.
• Wipe the inside of the drum with a damp cloth to remove any dust from transport.
Important notes regarding installation
• This clothes dryer can be installed on the floor level, upside down, on a rack or wall-
mounted. Detailed instructions for each option are provided on the following pages.
• The appliance must not be installed behind a lockable door, sliding door or a door
with a hinge on the opposite side of the clothes dryer.
• Do not install the appliance in a tight fitting cabinet.
• Make sure that all electrical connections are made by qualified personnel and all
instructions in this manual as well as local safety regulations are observed.
• Place the dryer in a dry, well ventilated area, away from heat and direct sunlight.
• Exhaust air must not be discharged into a flue which is used for exhausting fumes
from appliances burning gas or other fuels.
Floor level installation
• If the dryer is installed on the floor, make sure to place it on a firm, flat, dry and
stable floor, close to an appropriate wall outlet.
• Do not place it on soft material such as foam, plastic or carpet, as this will block
the air intake.
• The dryer comes with legs (that may need to
be assembled) to ensure stability. To avoid
damaging the floor, lay the dryer on a large piece of
cardboard (from the dryer carton) and attach the legs
as illustrated (Fig. 1).
• See points 3 and 4 on page 13 for installation of the exhaust connector.
• Stand the dryer on its feet and slide it into position, leaving a space of at least
10cm between the dryer and any wall. Use the adjustable legs to assist in
levelling the dryer, if necessary. When the dryer is level, tighten the legs.
CAUTION: This appliance is heavy. Use two or more people to move and install it.
Fig. 1

11
AFTER SALES SUPPORT
1300 886 649
[email protected]
AUS MODEL: GYJ70-78F3E PRODUCT CODE: 48141 06/2015
Getting Started: Installation (Cont.)
Upside down installation
The dryer can be installed upside
down, if this suits your setup better.
To prepare the unit for upside down
installation, proceed as follows:
1. Place the dryer upside down on
a firm horizontal surface, such as
on a counter or on top of a front
load washing machine (Fig. 2).
2. Take the additional printed
control panel from the
wall-mounting kit and place it
over the existing panel (Fig. 3).
3. Remove the four legs from the
dryer (Fig. 3).
4. The dryer is now ready for upside
down use (Fig. 4).
Fig. 2
Fig. 4Fig. 3

12
AFTER SALES SUPPORT
1300 886 649
[email protected]
AUS MODEL: GYJ70-78F3E PRODUCT CODE: 48141 06/2015
Wall-mounted installation
• If mounting above a washing machine, allow sufficient room to open the lid of a
top load washer.
• You will need at least 5cm space between the top of the dryer and the ceiling for
ease of installation.
• If you want to mount this dryer directly to your laundry wall, it must be installed
upside down. Use the supplied wall-mounting kit which contains the following
parts:
Parts of the Wall-Mounting Kit
Part Illustration Quantity
Hanging brackets 2
Spacers 2
Exhaust Connector 1
12mm Screws 4
25mm Screws 4
16mm Screws 3
Getting Started: Installation (Cont.)
• Additional tools required (for mounting onto a plasterboard/wood stud wall):
* Drill (with a 3mm drill bit)
* Phillips head screw driver
* 4 Timber screws (ø12x50mm)
* Helper to help lift the dryer onto the wall.
• Wall-mounting instructions follow on the next pages.
Rack-mounted installation
• If the clothes dryer is to be rack mounted, you will need a secure bracket (Fig. 5)
to ensure stability and prevent vibration. (The bracket is not included.)
• Make sure to leave at least 10cm space between the dryer and the wall.
• You will need at least 5cm space between the top of the dryer and the ceiling for
ease of installation.
Bracket
Fig. 5

13
AFTER SALES SUPPORT
1300 886 649
[email protected]
AUS MODEL: GYJ70-78F3E PRODUCT CODE: 48141 06/2015
Step-by-step wall-mounting instructions
When mounting the clothes dryer to a plasterboard wall, make sure to attach the
wall-mounting bracket securely to a timber stud. If the space between two studs is
too wide, fit a timber slat between the studs to mount the brackets securely onto the
studs (Fig. 6).
1. Determine the dryer position on the wall and mark the required bracket position.
2. Fix the two wall-hanging brackets securely
to the timber stud (Fig. 6). Align the hanging
hooks and fasten the screws tightly (Fig. 7).
Getting Started: Installation (Cont.)
3. If wall-mounting upside down, first
convert the appliance for upside
down use (see page 11). Then
install the exhaust connector: push
the connector over the exhaust
vent at the back of the dryer with
the exhaust outlet in the direction
required (Fig. 8).
4. Use the three 16mm screws to fix
the connector firmly in place.
Fig. 7
Fig. 6
Fig 3
16m m long screws
1
1
Fig. 8

14
AFTER SALES SUPPORT
1300 886 649
[email protected]
AUS MODEL: GYJ70-78F3E PRODUCT CODE: 48141 06/2015
Getting Started: Installation (Cont.)
5. Use the four 12mm screws to attach the two spacers (Fig. 9).
Fig 5
Fig 4
12m m long screws
Sp acers
Fig. 9
Spacers
12mm long screws
Mounting notches
6. With assistance, mount the clothes
dryer onto the wall bracket (Fig. 10).
7. Once the clothes dryer is properly
installed, plug the electrical cord into
an appropriately earthed three pin
240V wall socket.
Fig 5
Fig 5
Fig. 10

15
AFTER SALES SUPPORT
1300 886 649
[email protected]
AUS MODEL: GYJ70-78F3E PRODUCT CODE: 48141 06/2015
Instructions
Loading the dryer
• Prior to loading the dryer, check that none of your items have the following
symbols anywhere on them. These symbols indicate that items are UNSUITABLE
for clothes drying.
• Make sure that the items to be dried do not have combustible materials or foreign
objects (such as lighters, hair pins, coins) inside pockets.
• Clean the lint filter before each use (see page 19)
and make sure it is properly in place.
• To avoid items getting tangled up in the dryer, which
results in uneven drying, we recommend placing
items into the dryer one at a time.
• Turn items with zippers inside out and fasten
buckles. This will also help reduce impact noise
when the items hit against the turning drum.
• As the dryer heat may permanently set stains, ensure you check prior to drying.
• Separate dark and light coloured items as you would do when washing.
• For best results, load the dryer with similar fabrics that take a similar period of
time for drying (see page 17 for suggested drying times).
• Place small, delicate items in a mesh bag; do not put too many items into one
bag. (It is not recommended to dry underwire bras
in a clothes dryer.)
• When drying large items such as a blanket or sheets,
open the dryer door and shake out the item from
time to time, then place the item back in the dryer
and close the door. This will ensure even drying.
• CAUTION: Do not overload the dryer: the maximum amount of dry textile material
that can be dried in one load is 6.5kg.
• The clothes dryer is intended only for drying textile
material washed in water.
• When closing the dryer door prior to starting the unit,
ensure that items are not jammed in the door.
• Do not add items into the dryer while it is operating.
CAUTION!
Make sure you read all safety precautions in this manual and are aware of the items
(listed on page 7) that cause a hazard if placed in the clothes dryer.

16
AFTER SALES SUPPORT
1300 886 649
[email protected]
AUS MODEL: GYJ70-78F3E PRODUCT CODE: 48141 06/2015
Instructions (Cont.)
Use the following buttons on the control panel to set a drying program and temperature.
Power Button
Press this button to switch the power on. The unit will beep, the light above the button
will come on, indicating that power is being supplied, and the default settings (Extra
Dry and Regular) will be selected.
Press the button again to switch off the power, the indicator light will go out.
Anti-Crease Button
Press this button to activate the Anti-Crease program. The light above the button will
come on, indicating that the Anti-Crease program has been selected.
When this program is selected, the dryer will add an 8-10 minute air-dry cycle after the
set drying program. During this cycle only cool air (no heat) will be generated to help
prevent creasing of the items just dried.
NOTE: To ensure you get the most out of the anti-crease function, do not overload
the dryer. Remove the dried items from the dryer immediately and hang on
coat hangers or fold.
Programs Button
Press this button, repeatedly, to select one of the following four drying programs. The
respective light above the button will illuminate, indicating which program has been
selected.
• Extra Dry: The drying time for this program is 200 minutes.
• Mild Dry: The drying time for this program is 150 minutes.
• Light Dry: The drying time for this program is 90 minutes.
• 1 hour: The drying time for this program is 60 minutes.
CAUTION: HOT SURFACE!
Do not touch the air intake during
a drying cycle: it will be hot.

17
AFTER SALES SUPPORT
1300 886 649
[email protected]
AUS MODEL: GYJ70-78F3E PRODUCT CODE: 48141 06/2015
Suggested drying times
Drying Capacity Drying Time
Regular Airing
Approximately 2kg Approximately 60min. Approximately 90min.
Approximately 3kg Approximately 90min. Approximately 150min.
Approximately 4.5kg Approximately 150min.
Approximately 6.5kg Approximately 200min.
Drying times can be affected by many factors, such as type of material, bulkiness of
the items, how full the dryer is, etc. The above list is only a guide.
Instructions (Cont.)
CAUTION!
Never stop the clothes dryer before the end of the drying cycle, unless you remove
all items quickly and spread them out so that the heat is dissipated.
Temperature Button
Press this button, repeatedly, to select one of the following three heat settings. The
respective lights above the button will illuminate, indicating which setting has been
selected.
• Regular: Strong heating. On this setting the dryer is working with two sets of
heating elements running simultaneously, providing the strongest hot airflow.
• Half: Medium heating. On this setting the dryer is working with two sets of
heating elements for 10 minutes, then with one set of elements for another 10
minutes, then with two sets again, and so on.
• Airing: Lukewarm. On this setting the dryer is working with only one set of
heating elements running, providing the weakest hot airflow.
Start/Pause Button
Press this button to start the set drying program. The light above the button will
illuminate, indicating that the dryer has started running.
NOTE: The dryer will not work until this button is pressed. You will have to press the
Start/Pause button again, after closing the door, if you opened the dryer’s
door during operation.
Lock
When the dryer is running, press the Programs and Temperature buttons
simultaneously and hold for 3 seconds to lock all buttons. In locked state, the
buttons’ programming functions will not work if pressed.
To unlock the buttons, press the Programs and Temperature buttons
simultaneously and hold for 3 seconds.

18
AFTER SALES SUPPORT
1300 886 649
[email protected]
AUS MODEL: GYJ70-78F3E PRODUCT CODE: 48141 06/2015
Problem Possible cause Solution
There is no
response
when pressing
buttons.
Is the power plug inserted firmly into
the wall socket?
Insert the power plug firmly.
The drum
does not turn.
Is the door closed?
Is the power plug firmly inserted?
Does the wall socket have power?
Close the door.
Insert the power plug firmly.
If power is switched on at the
wall socket, check the socket
with another appliance.
Hot air is not
blowing out.
Is the temperature incorrectly set to
airing?
Set the temperature to Half or
Regular heat.
The washing is
not thoroughly
dried.
Are the front and back filters clogged?
Is there too much washing in the
dryer?
Have items been added while the
dryer is in operation?
Has the washing been twisted while
drying?
Is the dryer operating in a small and
poorly ventilated area?
Have you set the dryer to the Light
Dry program?
Check and clean the filters.
Reduce the amount of
washing in the dryer.
Dry damp items again for a
little longer.
Untwist the items and dry
them for a little longer.
Place the dryer in a well-
ventilated area.
Try using the Mild Dry or
Extra Dry settings instead.
The dryer does
not start.
Is there a power failure?
Is the power plug inserted firmly?
Is the door closed?
Have you selected a drying program
and temperature?
Is the power switched on at the wall
socket?
Check and try again when the
power is back.
Insert the power plug firmly.
Close the door securely.
Set a drying program and
temperature.
Switch on power at the wall
socket.
Troubleshooting guide
If your clothes dryer has a fault, is not working properly, or you think it should work
better, use the list below to identify and solve any problems. If you cannot solve the
problem, contact our after sales support line. Do not attempt to dismantle or repair the
dryer yourself.
FAQs

19
AFTER SALES SUPPORT
1300 886 649
[email protected]
AUS MODEL: GYJ70-78F3E PRODUCT CODE: 48141 06/2015
Other Useful Information
Maintenance
To prolong the service life of your clothes dryer, keep it in good condition and clean
the filters regularly.
Cleaningthelintlter
The lint filter must be in place whenever drying. It must be cleaned before each use.
1. To remove the filter, insert your fingers into the four holes around the exhaust vent
shroud and pull out the filter assembly. It consists of three parts: the exhaust vent
shroud, the lint filter and the exhaust filter (Fig. 11).
CAUTION: Before cleaning or maintenance, unplug the dryer from the wall socket.
2. Take off the exhaust filter, then separate the lint filter from the exhaust vent
shroud, pulling gently at the edges. Using a soft brush, cloth or vacuum cleaner
attachment, clean the filter parts, taking care not to damage the filters (Fig. 12).
3. After cleaning, assemble the parts in the sequence of exhaust filter - lint filter
- exhaust vent shroud (Fig. 13), aligning the recesses in the centre with the
projection in the centre of the drum. Make sure that the filter assembly is firmly
inserted. It should audibly click into place.
NOTE: The fixed metal grid fixed at the rear of the drum should also be cleaned
with a soft cloth or brush.
Fig. 13
The filter is affixed to
the back of the drum.
Fig. 11
Exhaust Lint Exhaust
vent shroud filter filter
Fig. 12
Lint filter Lint Exhaust filter Dust cleaner

20
AFTER SALES SUPPORT
1300 886 649
[email protected]
AUS MODEL: GYJ70-78F3E PRODUCT CODE: 48141 06/2015
Other Useful Information (Cont.)
Cleaning the interior and exterior of the dryer
• To clean the exterior surfaces of the clothes dryer, only use a dry cloth, or a cloth
dampened with water and a little mild detergent.
• Do not wash exterior or interior surfaces directly with water.
• Do not use solvents, thinner, alcohol based or harsh or abrasive cleaners on any
of the dryer surfaces.
• Do not use any type of spray cleaner when cleaning the interior. If the dryer drum
becomes stained, clean the drum with a damp cloth.
• If cleaning the drum has left any residues on the drum, make sure to remove it
before drying the next load.
Cleaningtheairintakelter
• The air intake filter at the front of the unit should be cleaned about once a month.
• To remove the filter, hold the upper and lower ends of the air intake shroud and
pull it outwards (Fig. 14).
• Remove the filter inside the shroud and clean it with a soft brush.
• Reassemble and push the filter back until it clicks into place.
Slightly push the shroud
upwards with your
thumb until the latch
hook disconnects, then
remove.
Fig. 14