Stirling 3 TIER SHOE CABINET User manual

STIRLING - 3 TIER SHOE CABINET
Thank you for purchasing the 3 TIER SHOE CABINET.
Please read the instructions carefully to ensure safe operation of the product.
Page
Batch No : PO# xxxx
Size: (W)600 x (D)240 x
Colour :
Page 1 of 10 V1 10/18
(H)1195mm
1
White / Light Grey / Oak / Espresso

Page 2 of 10
Due to the size of this product we recommend that is assembled in the room intended for use.
When you ready to start, make sure that you have the right tools, plenty of space and a clean, dry area for
assembly
Unwrap all packaging materials and place the components on top of the carton box or not on a clean floor to
prevent it from scratching.
Check the pack and make sure you have all the parts listed.
Ensure that this product is fully assembled as illustrated before use.
Check all screws or bolts are tightened and inspect regularly.
This product should only be used on firm, level ground.
Keep small parts out of reach of children.
Make sure the legs remain in contact with the ground.
Tools not included.
DO NOT use power tools to construct this product.
DO NOT tighten screw until fully assembled.
DO NOT over tighten screw or bolts.
DO NOT use this product if parts are missing, damage or worn.
DO NOT stand or sit on this sideboard.
We recommend the use of the wall safety bracket provided for safety reasons. N.B. Wall fixings suitable for a
solid wall are included although the wall plug provided may not be suitable for other type of walls such as hollow
walls. Fixings suitable for your wall type must be obtained separately..
If in doubt please consult a qualified trade person. Warning: Always ensure the area to be drilled is free from
hidden electrical wires, water and gas pipes.
It is essential that this unit is fixed to a wall with the fixings provided.
Never use scourers, abrasives or chemical cleaners.
To clean wipe with a sponge and soapy water. Do not use solvent based cleaners or detergents as they
can bleach or damage the product.
V1 10/18
The maximum load capacity for each drawer is 5kg. Do not exceed this weight.

Side Panel (L) (15 x 249 x 1180mm)A 1
BSide Panel (R) (15 x 249 x 1180mm) 1
CTop Panel (15 x 250 x 600mm) 1
DBar Support (Back) (15 x 80 x 568mm) 1
EBar Support (Back) (15 x 80 x 568mm) 1
FBar Support (Front) (15 x 80 x 568mm) 1
GBar Support (Back) (15 x 80 x 568mm) 1
HFront Panel (12 x 357 x 564mm) 3
IShoe Rack Panel (Mid) (12 x 138 x 562mm) 3
J
K
Shoe RackPanel (Back) (12 x 138 x 562mm) 3
Shoe Rack Panel (Bottom) (12 x 80 x 562mm) 3
Page 3 of 10 V1 10/18
C
G
D
E
F
H
I
J
K
H
H
A
B

5
3
11x
c
Wooden Dowel
D6 x 30mm
4x
d
Minifix Bolt
M5 x 29mm
4x
g
Nail Leg
5 x 8 x 13.5mm
4x
i
Minifix Cam
D15 x 12mm
1x
n
Allen Key
M4
Page 4 of 15
8x
a
Unitar Screw
D6.3 x 40mm
2x
b
CSK Screw
M4 x 38mm
18x
h
Csk Screw
M3.5 x 15mm
30x
e
Csk Screw
M4 x 25mm
j
Handle PVC
(64hole mm) 3x
m
2 Tier Shoe Rack
6x
f
Tapping
Screw
M10 x 20mm
V1 10/18
2x
k
Wall Plug
3x
m1
m2
m3

STEP 1
26 x
c
Page 5 of 10
c
V1 10/18
Panel (G) 1
Parts Required Qty
Panel (A)
Panel (B)
Panel (D)
1
1
1
Panel (E)
Panel (F)
1
1
c
c
c
c
3 x
m
B
D
E
F
p
m1
c
G
c
m2
m1 m2
m1
m1
m1
m2
m2
m2
m2
m2
m2
m1
m1
m1
A
c

STEP 2
STEP 3
j
4x
d
3 x
Page 6 of 10
n
V1 10/18
Parts Required Qty
Panel (C) 1
d
Panel (K) 3
Parts Required Qty
Panel (H) 3
d
d
d
d
Panel (J) 3
m
e
24 x
18 x
h
h
STEP A
STEP B
STEP C
X3
e
j
e
C
H
H
K
J
H
m
3 x

STEP 4
STEP 5
Page 7 of 10
i
a
V1 10/18
Parts Required Qty
Panel (A) 1
Parts Required Qty
Panel ( B )
Panel ( D )
1
1
4 x
a
n
a
n
a
Panel ( E ) 1
Panel ( F ) 1
Panel ( G ) 1
4 x
n
a
n
B
D
E
F
G
a
n
B
A
G
DF
E
a
n

STEP 6
STEP 7
g
f
Page 8 of 10
Parts Required Qty
Panel (C) 1
Parts Required Qty
1
4 x
i
V1 10/18
k
E
F
A
G
D
B
"TAP
TAP"
A
E
F
B
G
D
C
g
b
i4 x
2 x
2 x
g
C
WALL
b
k

STEP 8
STEP 9
Page 9 of 10 V1 10/18
p
Parts Required Qty
Panel ( I ) 2
p
m3
p
p
e
6 x
C
D
A
B
KH
3x
m
C
A
D
I
B
KH
J
J
6 x
f
f
e
I
H
m3
X3
X3

Your STIRLING 3 TIER SHOE CABINET is now completely assembled
Page 10 of 10 V1 10/18