STODDART SPPL.HSS.01 User manual

Rev: A - 01/02/2018
Model:
SPPL.HSS.01
Installation Manual
Hand Sanitiser Stand

Due to continuous product research and development,
the information contained herein is subject to change without notice.
Page 1 www.stoddart.com.au
Hand Sanitiser Dispenser Units
Contact Stoddart on 1300 79 1954 to enquire about our Australian manufactured Hand Sanitiser Dispenser or email [email protected]
*Limited Stock

Due to continuous product research and development,
the information contained herein is subject to change without notice.
Page 2
www.stoddart.com.au
SPPL.HSS.01
In the box Assembly
For other company supplied dispensers
1 x Stand Body
1 x Stand Base
1 x 1/9 GN Pan
6 x M5 16mm Mushroom Phillips Head Screws
2 x M5 Flat Washers
2 x M5 Nylock Nuts
• Insert 1/9 GN pan into the stand body
• Using a Phillips head screwdriver, secure the stand body to the
stand base with 4 M5 mushroom head screws • Using a Phillips head screwdriver and shifting spanner, secure
the dispenser to the stand (use the hole locations that best
suited to the dispenser) with the supplied M5 mushroom head
screws, M5 washers and M5 nylock nuts
• For dispenser units supplied with double sided tape, install the
dispenser as per the instructions supplied by the dispenser
manufacterer
1.
3.2.
Hand Sanitiser Dispenser Stand
Tools Required
Phillips Head Screwdriver #2
Socket Set and/or Shifting Spanner

www.stoddart.com.au
International
Sales
Tel: [phone]
Email: [email protected]
Service / Spare Parts
Tel: [phone]
Email: [email protected]
Email: [email protected]
www.stoddart.co.nz
New Zealand Business Number: 6837694
New Zealand
Sales
Tel: [phone]
Email: [email protected]
Service / Spare Parts
Tel: [phone]
Email: [email protected]
Email: [email protected]
www.stoddart.com.au
Australian Business Number: 16009690251
Australia
Sales
Tel: [phone]
Email: [email protected]
Service / Spare Parts
Tel: [phone]
Email: [email protected]
Email: [email protected]