Storm Shell SS-55 Programming manual

ASSEMBLY & INSTALLATION INSTRUCTIONS
SS-55/65/75 Pole Mount
v 3.0
If you have any questions, please contact us at
[e-mail], or call at [phone]
Mon –Fri 9am –5pm (MT)
1
(Storm Shell Hard Cover and pole not Included)

2

3
•If you need any assistance with your new item, please call us or you can
email us your inquiries. We will be happy to assist and walk you
through your assembly process.
•If you are missing any parts, we will ship them to you free of charge.
•Work in a spacious area near where the item will be used.
•Check your item list to make sure all your parts and hardware are
included before you begin the assembly process.
•It is important to follow each step as instructed to avoid any unwanted
obstacles.
STOP
Please do not return to store.
WE CAN HELP
Email: [e-mail]
Call: [phone] M–F 9am –5pm (MT)
For Customer Service

Before getting started, let’s make sure this
Storm Shell Pole Mount will work for you!
Pole Size Requirements
The Storm Shell Pole Mount
allows the Storm Shell Hard
Cover, and TV bracket to be
assembled to a vertical
cylindrical pole.
•Hardware is included to
attach the Storm Shell to a
pole with a diameter
between 1.5 inches and 4.0
inches.
4
The 55/65/75 Storm Shell Pole Mount is designed to be used with the 55, 65
or 75 Storm Shell TV Hard Cover. This instruction manual is a supplement to
the Assembly and Installation Instructions for Storm Shell TV Hard Cover.
Weight Capacity
Maximum TV Weight
(including accessories): CAUTION! 100 LBS MAX


All Installations
Installation Tools (Not Included)
5
Tape Measure Pen/Pencil
Power Drill
Phillips
Screwdriver
Bubble Level Socket Wrench
1/4” (7mm) Drill Bit

Safety Caution
•Prior to installation of this product, the installation instructions
should be read and completely understood to prevent personal injury
and property damage. Keep these installation instructions in an easily
accessible location for future reference.
•This mount and the hard cover contains small parts which can act as a
choking hazard if swallowed.
•CAUTION: The maximum TV load capacity is 100 lbs. (45 kg). Use with
products exceeding the maximum load capacity may cause serious
injury.
•The pole structure must be capable of supporting at least five times
the maximum load capacity as indicated. If not, the pole must be
reinforced.
•Do not install on a structure that is prone to vibration, movement or
chance of impact. Failure to do so could result in damage to the
display and/or damage to the mounting surface.
•Do not install near heater, fireplace, air conditioning or any other
heat producing source. Failure to do so may result in damage to the
display and/or the hard cover and could increase the risk of fire.
•Make sure no water or natural gas lines are present where the mount
is to be installed. Cutting or drilling into water or natural gas lines
could cause personal injury or property damage.
•Proper installation procedure by yourself or a qualified service
technician, as outlined in the installation instructions, must be
adhered to. Failure to do so could result in serious personal injury.
•It is recommended that two people perform the installation. Injury
and/or damage can result from dropping or mishandling the display
or hard cover.
•If you don't understand these installation instructions, please consult
an installation specialist.
6

55/65/75 Pole Mount
Supplied Parts & Hardware
7
Pole Mount (1 PC)
Assembly Hardware
1.5” U-Bolt
L1 (2 PC)
M6 Flange Nut
L7 (4 PC)
2.0” U-Bolt
L2 (2 PC)
3.0” U-Bolt
L3 (2 PC)
4.0” U-Bolt
L4 (2 PC)
M6x16mm
L5 (4 PC)
M8x30mm
L6 (4 PC)
M8 Thin Nut
L8 (8 PC)
M8 Washer
L9 (8 PC)
M8 Spring Washer
L10 (8 PC)
Keyhole Plug
L11 (2 PC)
Round Hole Plug
L12 (2 PC)
CAUTION!
CHOKING
HAZARD

8
Assembly & Installation Video
Scan the QR Code for video link
1-1 Prepare the Storm Shell
Step 1 –Prepare the Storm Shell
•Follow Step 1 in your Storm Shell owner’s manual to assemble
your Storm Shell Back and Storm Shell Front.

9
Step 2 –Attach Storm Shell Back to a Pole using the
55/65/75 Pole Mount
CAUTION!
Two people required for installation
2-1 Mount Storm Shell Back
•Place the Storm Shell Back on a protective cover over the ground
or other smooth surface with the back facing upwards.
•Temporarily attach the Pole Mount to the Storm Shell Back with
L6 screws and L8 nuts.
•Use a bubble level to ensure the Pole Mount is level.
L6 x 4
L8 x 4

2-2 Mount Storm Shell Back
10
2-3 Mount Storm Shell Back
•Mark the Storm Shell Back in the 4 indicated hole locations.
•Remove the Storm Shell Pole Mount and drill the 4 marked
locations with a 1/4” (7mm) drill bit.

11
2-5 Mount Storm Shell Back
•Select the smallest U-bolts that fit the pole and attach the Pole
Mount at the desired location.
2-4 Mount Storm Shell Back
L9 x 4
L10 x 4
L8 x 4
L1 x 2
L2 x 2
L3 x 2
L4 x 2
or
or
or
L7 x 4
L5 x 5

12
2-6 Separate Vertical Brackets from TV Bracket
2-7 Note the TV Bracket Orientation
TV Bracket –
This way up
Note the hole
pattern location
•Rotate the TV bracket joints, if needed, to match this orientation.
•TV bracket from the Storm Shell Cover.

13
2-9 Mount Storm Shell Back
•Install the L11 and L12 hole plugs in the Storm Shell Back in the
unused wall mount holes.
•Attach the TV Bracket.
2-8 Mount TV Bracket
L9 x 4
L10 x 4
L8 x 4
L6 x 4
L11 x 2
L12 x 2

14
3-1 Complete your Storm Shell Assembly
Step 3 –Complete your Storm Shell Assembly
•Follow all steps after Step 2 in your Storm Shell owner’s
manual.