Streamax M1N-TKH0401 User manual

M1N-TKH0401 User Manual
M1N-TKH0401 User Manual
（V1.0）
Streamax Technology Co., Lt

M1N-TKH0401 User Manual
1Overview
《M1N-TKH0401 User Manual》It aims to better understand the powerful functions of the
equipment system and how to guide us to fully understand and use these functions more efficiently.
1.1 System Introduction
M1N-TKH0401 is a cost-effective device specially developed for mobile video surveillance and
remote video surveillance, featuring high functional scalability. It is equipped with a high-speed
processor and an embedded operating system, integrating state-of-the-art H.265 video
compression/decompression technology and GPS/BD positioning technology in the IT industry. It
supports video recording in 1080p, 720p, WD1, WHD1, WCIF, D1, HD1, and CIF formats. In
addition, it supports extended AI intelligent algorithms to report alarms by using the Advanced
Driver Assistance System (ADAS) and implement Blind Spot Detection (BSD) and Driver Status
Monitor (DSM), effectively assisting drivers in safe driving and reducing traffic accidents.
1.2 Functional Overview
M1N-TKH0401 is a cost-effective intelligent device specially developed for remote video and
driving safety monitoring of commercial vehicles. Its functional characteristics are as follows:

M1N-TKH0401 User Manual
Embedded Linux operating system
Extended AI intelligent algorithms
H.265/H.264 encoding/decoding to improve the memory space utilization
Dual SD cards
Good anti-vibration performance, simple design, flexible and easy installation, and high
reliability, providing comprehensive functions
2 Display Operation
The operation of parameter configuration, preview, playback and data export of the host can be
carried out through the CP4 control panel, freight operation and maintenance treasure or IE terminal.
CP4 can be operated by full-screen touch or connected with a mouse.
2.1 Button Control
Button Description
Replay Buttons for reporting stops with special equipment for school buses.
Announce The school bus special equipment report button, press the stop button on the direct
interface to enter the stop report interface.
Number 1-0 Press 1-9 to display channels 1-9 when you are currently in the direct
interface, and press 0 to display the next channel.
Number input key
Arrow Direction selection key
Enter Confirm selection key
Exit Exit the current menu

M1N-TKH0401 User Manual
2.2 Mouse control
You can connect a mouse through the USB port to operate on the CP4 panel, and the mouse
cursor will appear on the screen after connection.
When the device is in four screens/nine screens, double-click the left mouse button to zoom
into a single screen display;
Click the left mouse button to select or perform other operations;；
Click the right mouse button to pop up the bottom menu bar.
2.3 Interface Operation
When using CP4, you can directly click the corresponding option on the screen with your hand,
or you can click with the mouse. To return to the previous interface, click the return button in the
upper right corner of the current interface 。
3 Function Instructions
3.1 Pass-through Interface
After the device is turned on, it enters the video pass-through preview interface by default. In the

M1N-TKH0401 User Manual
pass-through interface, touch the screen (or click the right button of the mouse), and a menu will
pop up at the bottom. [Playback], [Biz Menu], [Login Profile Picture].
 Click anywhere on the screen (or click the right mouse button) to pop up the bottom menu
bar;
 The video through preview interface can be superimposed: time, vehicle speed, license
plate, positioning information, alarm status, channel name, vehicle self-number, ACC
information; whether the superimposed information is displayed and the display position can
be configured in the parameter settings;
 Single screen: Click [Single screen] to switch the video channel;
Four-screen/nine-screen: After selecting the four-screen/nine-screen layout, double-click a
video screen to zoom in to a single-screen display, and click again to return to the
four-screen/nine-screen layout.
3.1.1 Single Screen
Single Screen: Click [Single screen] on the pass-through interface, and the pass-through
interface will display a single channel video. Double-click the screen to return to the four-screen
layout.

M1N-TKH0401 User Manual
3.1.2 Four Screens
Four Screens: Click [Four screens] on the pass-through interface, the pass-through interface
displays 4 channels of video, and only the channel connected to the camera will have the screen
display. As shown below. Double-click a channel on the screen to zoom in and display a channel
individually, and double-click again to return to the four screens.
3.1.3 Nine Screens
Nine Screens: Click [Nine screens] on the direct interface, the direct interface displays 9
channels of video, and only the channel connected to the camera will have the screen display. As
shown below. Double-click a channel on the screen to zoom in and display a channel individually,
and double-click again to return to the nine screens.

M1N-TKH0401 User Manual
3.1.4 Replay
Playback: Click [Playback] on the direct interface to directly enter the playback interface, as
shown in the figure below:
3.1.5 Biz Menu
Biz Menu：Click [Biz Menu] on the direct interface to enter the following interface:
3.1.6 Log in
In the direct interface, touch the screen (or click the right mouse button), a menu will pop up at the
bottom, and click the avatar button on the far right to log in and enter the setting interface:

M1N-TKH0401 User Manual
3.2 System Message
In the direct interface, click [Login Profile]>[System] to enter the following interface:

M1N-TKH0401 User Manual
3.3 Video Search
3.3.1 Video Query
Click [Login Avatar]>[Video Search] on the direct interface to enter the video query interface
(operate when the SD card exists), the interface is as shown in the figure below:
3.3.2 Video Playback
In the video query result interface, click Playback directly to playback the video files of the
selected channel and time period, as shown in the figure below:

M1N-TKH0401 User Manual
3.4 Settings
In the direct interface, click [Login Profile]>[Settings] to enter the setting interface. In the
setting interface, basic settings, recording settings, data collection settings, alarm settings, and
operation and maintenance settings can be performed.

M1N-TKH0401 User Manual
3.5 Sign Out
In the setting interface, video viewing interface or log viewing interface, click the button in the upper
right corner to return the interface to the main setting interface, as shown in the figure below:
Click the [Logout] button and click "YES" in the pop-up confirmation prompt box to log out
and return to the direct interface.

M1N-TKH0401 User Manual
3.6 FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions (1)this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.

M1N-TKH0401 User Manual
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum
distance 20cm between the radiator & your body.