
PRODUCT PART DESCRIPTION:
OPERATING INSTRUCTIONS:
1. Clean the surface you wish you stick the fan to.
2. Ensure the fan is OFF.
3. Loosen swivel nut on rear of fan, push fan into the connector of suction cup and
secure loosely.
4. Position fan where you are sticking on windscreen. Push suction cup lever firmly
down. This should now secure the fan in place.
4. You can now rotate the fan head to desired angle and tighten the swivel nut in
place.
3. Start the vehicle and plug 12V plug into the power socket. Using the 2-speed
control, select the desired speed.
4. To turn the fan off, move control switch to ‘0’ position. Fan can be left on
windscreen but remove 12V plug from power socket when not in use.
WARNINGS:
1. After opening the packaging, please dispose or handle bags properly in order
to avoid children or pets suffocation.
1. Do not insert fingers into fan when in operation.
2. Do not use fan in dusty or dirty surfaces as the suction mount will not stick.
3. Do not point the fan directly at fire or gas.
4. Do not put any metal or flammable items into the product.
5. Do not use near fires or high temperatures.
6. Do not submerge the fan into water when cleaning.
7. Do not use outdoors if there is thunder to avoid shock/fire.
8. Please keep children away from the electrical parts.
9. When cleaning, do not spray detergent directly onto fan.
CLEANING & MAINTENANCE
Before cleaning, please ensure fan is unplugged and turned off. Use a damp
cloth to wipe clean the exterior. Do not submerge fan into water. Avoid scratching.
PROBLEM SOLVING:
Problem Cause Solution
Does not start. Plug not inserted into
socket correctly.
Insert plug into
socket.
Does not start. Cigarette lighter has poor
contact with socket.
Check both plug and
lighter socket contact.
Sound but not
movement on start up.
Motor fault. Send for repair.
Works only once after
start up.
Voltage of fan and
vehicle do not match.
Choose right fan with
correct voltage for
your vehicle.
Fan
Lever
12V Power plug