Streetwize SWINV150 Specification sheet

Information for use
SWINV150
300WPEAK
150WInverter
Modified Sine Wave

Health & Safety Guidelines
IMPORTANT: This inverter is only suitable for use with 12V batteries only.
This appliance is primarily designed for operating Class 2 appliances.
Warning! Electric Hazard. Keep away from children
1. This inverter is not a toy, and it should never be used by children.
2. This inverter generates the same voltage as a UK 3-pin plug socket.
Please operate it as if you are using any other AC mains socket.
3. Never insert any kind of foreign object into the inverter’s plug sockets,
fan or vent openings.
4. Do operate or expose the inverter to water, rain, snow or spray
5. Never connect the inverter to an AC power source. This inverter is only
designed to accept a DC power supply.
Warning! Heated Surface
6. The inverter’s outer casing may become hot after prolonged use or
overloading. During operation, ensure there is atleast a 5cm (2 inches)
gap between the inverter and any other walls.
7. Please keep any ammable materials away from the inverter during
operation.
Warning! Explosion Hazard
8. Never use the inverter in the presence of ammable substances
Caution!
9. Do not connect a live AC power source to the inverter’s AC output
sockets. This will damage the inverter, even if the inverter is switched
off.
10. Do not expose the inverter to temperatures over 40oC.
Caution! Do not use the inverter with the following equipment:
11. Class 1 appliances. See Class 1/Class 2 section.
Recommended battery Running time at rated continuous rated power
12V/45Ah 3 hour

Intention For Use
Thank you for purchasing this 800W modied sine wave inverter from Streetwize.
This inverter safely converts your vehicle’s 12V DC battery into a 240V AC power
supply for using standard UK electrical appliances that require up to 800W.
It is intended for people who require access to an AC power supply in areas where
there is restricted access to power. They’re suitable for caravan/campervan users as
well as tradespeople.
This modied sine wave inverter is not suitable for use with appliances with AC
motors (i.e. microwaves, refrigerator), medical equipment, laser printers and
ourescent lights.
In addition, this inverter is primarily designed for operating a wide range of Class
2 appliances. Class 2 appliances are double insulated and do not require earth
connections. Most computers, laptops, photocopiers, cordless power tools, and
plastic-cased appliances are identied as Class 2 appliances.
Class 1 appliances, on the other hand, are protected by basic insulation and
earthing provision and most typically come in a metal casing. This product is not
suitable for operating Class 1 appliances. Typical Class 1 appliances include
toasters, kettles, washing machines and irons.
IMPORTANT: This inverter is primarily designed for powering appliances up to its stated
continuous output. The stated peak output is only available for a limited time.
Class 1 / Class 2
As mentioned in the Intention For Use section, this product is primarily
designed for operating Class 2 appliances, which don’t require earthing
Class 1 Class 2
Symbol
Earth Wiring Present Yes No
Insulation Basic Insulation Double Insulation
Appliance casing Metal Plastic
Appliance examples
Toasters, kettles,
washing machines
and irons
Hedge trimmers, lawn
mowers and drill

Product Elements
Pure Sine Wave & Modied Sine Wave Inverters
Operating Instructions
1. Modied sine wave inverter
2. 12V connection cables
3. Battery clamp connection cables
There are two types of inverters: Pure Sine Wave & Modied Sine Wave.
The gure below shows a graphical comparison of modied sine wave inverters and pure
sine wave inverters.
Modied sine wave inverters provide a cost-effective option of powering 230V AC
appliances from a 12V battery. However, a pure sine wave inverters provide even ow of
electric output where a modied sine wave inverter is staggered.
The gure below shows a graphical comparison of modied sine wave inverters and pure
sine wave inverters.
PLEASE NOTE: There are two ways of operating the inverter. The rst way is to power the
inverter via your vehicle’s 12V socket. This is ideal for power appliances that require less
than 150W. The second way is through direct connection to the battery, via the supplied
battery clamp connection cables. This is ideal for powering appliances more than 150W.
Modied Sine Wave
Sine Wave
Optimum Working Conditions
For safe & optimum performance, please install the inverter in a location that is:
• Dry - The inverter should not be near any liquid or moisture.
• Cool - Keep it away from any high heat source.
• Well-ventilated - Allow for atleast 5cm of space on all sides.

• Clean - To prevent any dust or unwanted elements from getting inside the inverter.
• Away from ammable substances - To prevent re or explosion.
12V Socket
To use the inverter via your vehicle’s 12V socket, simply connect the O-rings of the 12V
connection cable to the inverter’s terminals, with the black cable going to the negative
terminal and the red cable going to the positive terminal. Plug the 12V plug into the 12V
socket, then switch on your vehicle.
WARNING: Only use the 12V plug for powering appliances that require less than 150W.
Do NOT power an appliance that requires more than 150W as this will risk damaging your
vehicle’s fuse.
Direct Battery Connection
This operating method is ideal for powering appliances more than 150W.
To use the inverter through direction to your 12V battery, rst ensure that your vehicle is
fully switched off.
Then, connect the black (negative) battery clamp connection cable to the negative termi-
nal of the inverter via the O-ring rst, and then connect the clamp to the negative battery
terminal of your 12V battery. Then, connect the red (positive) battery clamp connection
cable to the positive terminal of the inverter via the O-ring and then connect the clamp to
the positive battery terminal of your 12V battery.
IMPORTANT: When starting your vehicle’s engine, please disconnect the inverter rst
before starting the engine.
Operating Appliances
Operating an Appliance Through The 3-Pin Plug
Once the inverter is connected to your battery, just plug in your appliance via the 3 pin
socket, and then turn ON the power switch.
Operating an Appliance Via The USB
Once the inverter is connected to your battery, just plug in the device via the USB socket,
and then turn ON the power switch.
Peak Output
This inverter provides a continuous output of 150W as well as a peak output of 300W.
Meaning, when you try to power appliances that total more than 150W, the inverter has
the capability to automatically adjust the wattage up to 300W.
IMPORTANT: When operating appliances that require more than the specied continu-
ous power wattage, the inverter will operate for a very limited amount of time and it will
automatically shut-down.
For long lasting performance, we recommend that you use this inverter for appliances
requiring less than specied continuous power wattage.

After Use
After you have nished using the inverter (or when the inverter is not in use), turn off the unit and
make sure your vehicle’s fully switched off.
Then, turn the unit off and then disconnect the inverter from the 12V power supply. When discon-
necting from the battery, disconnect the negative cable rst, followed by the positive cable.
Best Practices for Protecting Your 12V Battery
• To prevent your vehicle’s 12V battery from being depleted. We recommend running the engine for 10 to
20 minute to recharge the battery after using the inverter for 2 to 3 hours. Important: Before starting your
vehicle’s engine, please disconnect the inverter from your battery/power supply.
• When connecting the inverter to your battery’s terminals, it is important that you connect it via the correct
polarity (i.e. Connect + from inverter to + of battery terminal and connect – from inverter to – of battery
terminal) to prevent reverse polarity.
• When you are using the inverter and you hear a beeping sound coming from the inverter, this means your 12V
battery is low. To recharge, disconnect the inverter from your battery and turn on the engine for 2 to 3 hours.
• When charging your 12V battery using a battery charger, please disconnect the inverter.
Troubleshoot/Problem Possible Cause Suggested Solution
Inverter is not working Poor battery connection Turn off the inverter and disconnect
it from the battery. Then reconnect
the inverter to the battery and
check to see if the connection is
correct.
Short circuit Turn off the inverter and disconnect
it from your 12V battery. Reconnect
the inverter to the battery’s termi-
nals and check to see if terminal
connections are correct.
DC input is below 10V Turn off the inverter and disconnect
it from your 12V battery. Please
check the Voltage of your battery.
This inverter is only suitable for 12V
batteries only.
DC input is above 10V Turn off the inverter and disconnect
it from your 12V battery. Please
check the Voltage of your battery.
This inverter is only suitable for 12V
batteries only.
Blown Fuse Check and replace the fuse. See
opposite how to replace the fuses.
Measuring The AC Voltage
Safety Features
The output waveform of the AC output is a MODIFIED SINE WAVE. To measure the AC
output voltage, you must have a TRUE RMS VOLTMETER.

How to Replace the Fuse
If in rare circumstances, the inverter
does not operate properly, you will
need to replace the fuse. To replace
the fuse, loosen and remove the
screws located on the base of the
unit, then remove the base plate to
reveal inside the inverter.
Locate the fuse as shown in the
image below, and replace with a
blade style 35 Amp
Fig. 1
Troubleshooting
What To Do When The Inverter Is Not Working
Troubleshoot/Problem Possible Cause Suggested Solution
Inverter gets really hot Overheat Turn off the inverter and
disconnect it from your 12V
battery and allow the inverter
to fully cool down. Ensure your
inverter is operating in a cool
area.
Inverter shuts down after
operating for a short time.
Overload The total Wattage is exceed-
ing the inverter’s specied
continuous power output. Turn
off the inverter and disconnect
it from your 12V battery. Then
disconnect any appliances that
are not required to reduce the
Wattage load.
Fuse

Technical Support
If you require any technical support for your product within the warranty period, please contact
us on suppor[email protected] and provide the product name and supplier code
(see Technical Specications) along with the technical query and proof of purchase.
Technical Specications
Product Name
Max Contiuous Power
Peak Power
Input Voltage
Output Voltage
Output Waveform
USB output
No load current
Battery low shutdown
Battery low alarm
Thermal shutdown
Fuse
Product dimensions
Streetwize 150W Modied Sine Wave Inverter
150W
300W
230V AC
12V (10 to 15V) DC
Modied Sine Wave
5V DC 1000mA
<0.3A
10+/-0.5V DC
11+/-0.5V DC
60+/-5°C
35A (x1)
16.4 x 12.6 x 5.5cm
Streetwize, Ashburton Road West,
Trafford Park, Manchester, M17 1RY
www.streetwizeaccessories.com
EU Regd. Address: Ace Supply Co (Europe) Ltd. D02 A098, ROI
For Product Support:
E: suppor[email protected]
T: [phone]
For Trade Enquiries:
E: [email protected]
T: [phone]