Studio Assets MegaMast SA1250 User manual

Step 1
Unscrew the head and
place the top plate onto
the MegaMast. Then
Screw the head back
onto the mast.
Step 3
Attach the collar & arms
to the 4th from the
bottom riser section on
the 27.5’ MegaMast or
the 3rd from bottom
riser on the 23’ version.
Step 2
Attach the clips on the
ropes to each of the
three holes on the top
plate.
MegaMast Stabilizer Instructions
Contents
A) Ropes with Pulleys
B) Collar with Arms
C) Top Plate
A
B
C
Step 4
Raise the mast to the
desired height. Then
attach the pulleys to the
hooks on the legs and
pull the ropes snug.
Notes
• The pulleys can be attached to tent stakes
in the ground for greater stability.
• Do not over-tighten the ropes. Pull each
one a little at a time until they are snug.

Step 1
Unscrew the head and
place the top plate onto
the MegaMast. Then
Screw the head back
onto the mast.
Step 3
Attach the collar & arms
to the 4th from the
bottom riser section on
the 27.5’ MegaMast or
the 3rd from bottom
riser on the 23’ version.
Step 2
Attach the clips on the
ropes to each of the
three holes on the top
plate.
MegaMast Stabilizer Instructions
Contents
A) Ropes with Pulleys
B) Collar with Arms
C) Top Plate
A
B
C
Step 4
Raise the mast to the
desired height. Then
attach the pulleys to the
hooks on the legs and
pull the ropes snug.
Notes
• The pulleys can be attached to tent stakes
in the ground for greater stability.
• Do not over-tighten the ropes. Pull each
one a little at a time until they are snug.