PROAIM P-MWP-D User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything
that is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable
copyright statutes or in wring by the Publisher.
Dynamic Wedge Tilt Levelling Plate (P-MWP-D)
Assembly Manua l
Wedge Plate
Screw Bolt with
Washer (3/8")
Screw Bolt with
Washer (1/4")

2
Wedge Plate Setup
 Remove all screw bolts on the wedge plate.
 To mount the wedge plate on the Orion
geared head, join the thread of the plate with
the screw bolt of the geared head. Secure the
wedge plate by ghtening the screw of the
Orion geared head
 To posion the wedge plate, loosen the knob
on the plate and set the posion as you
desire.
 To mount the camera on the wedge plate,
screw the bolt onto the wedge plate.
 Align together the wedge plate screw and the
camera thread. Then, ghten it with the help
of an Allen key.
 Image showing wedge lt plate setup.

3
YOUR PROAIM DYNAMIC WEDGE TILT LEVELLING PLATE
ALL DRESSED UP AND READY TO GO!
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon and
evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.
(SHOWN WITH OPTIONAL ACCESSORIES)