StyleWell BD8043B/W User manual

Item #1004076399/395
1004076400/396
Model # BD8043B/W
BD8042B/W
USE AND CARE GUIDE
BLACK/WHITE METAL QUEEN/FULL BED
THANK YOU
We appreciate the trust and condence you have placed in Stylewell through the purchase of this Black/White metal queen/full bed.
We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available
for your home improvement needs. Thank you for choosing Stylewell!
Questions, problems, missing parts? Before returning
to the store, Customer Service.
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m.,
EST, Saturday
1-877-527-0313
HOMEDEPOT.COM

2
Table of Contents
Table of Contents..........................................................2
Safety Information.........................................................2
Warranty.........................................................................2
What is Covered .......................................................................2
What is Not Covered ................................................................2
Pre-assembly ..............................................................3
Planning Assembly ................................................................3
Tools required ..........................................................................3
Hardware Included...................................................................3
Package Contents ....................................................................4
.......................................................................... 5
.......................................................................... 6
......................................................................... 7
Safety Information
DANGER
WARNING
CAUTION
Warranty
1 YEAR WARRANTY
WHAT IS COVERED
THD warrants its product to be free from defects in material and workmanship and agrees to remedy any such defect.
This warranty covers 1 year from the date of original purchase. This warranty is valid only upon presentation of proof of purchase.
WHAT IS NOT COVERED
It remanis the customer’s responsiblity for freight and packaging charges to and from the customer service center.Labor and material charges to
remove or replace parts under this warranty are not covered.This warranty does not cover:Furniture used for commercial purposes,failures caused by
improper installation or abusive use, Freeze damage,acts of god,rust,purchased parts or return freight and packaging charges .
Contact the Customer Service Team at 1-800-998-7021 or visit www.HomeDepot.com.
Assembly – 1
Assembly – 2
Assembly
– 3
Maintenance
Care and Cleaning
Assembly
– 4
.......................................................................... 8
............................................................................. 9
1. To avoid danger of suffocation , keep the small parts/bolts away
from babies and children.
2. Make sure all bolts are tightly fastened before the product is used.
3. Please read the assembly instructions carefully prior to assembling
the product.
1. Should this products become damaged, and/or components are broken
or missing, DO NOT USE.
2. To avoid damage, assemble the product on a non-abrasive surface
such as carpet.
3. Please make sure you have all parts before beginning assembly.
4.Do not throw away any packaging material until assembly is
completed
1. Adult assembly required. Assembly may require two people.
2. Please wait until all steps are completed before tightening bolt.
3. Use the long end of the allen wrench to fasten allen bolts loosely and
quickly.
4. Use the short end of the allen wrench for nal tightening.
5. Do nottighten bolts completely unitl all bolts are completelylined up and
inserted into holes /nuts
...................................................................... 9

3
Pre-assembly
PLANNING ASSEMBLY
NOTE: DO NOTuse power tools
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part Hardware list Quantity
AA Bolt1/4x15mm 34
BB Bolt1/4x45mm
CC
DD
EE
AA BB CC DD EE FF GG HH
8
FlatWas
her
8
Nut 8
Open Spanner
1
FF
GG
HH
Alle
n Key
1
AdjustableLev
eler
4
Bracket 4
Ensure all partsand components arepresent before begining assembly.
Do not over tighten screws and boltsto avoid stripping.

4
Pre-assembly (continued)
PACKAGE CONTENTS
Part Part Description Quantity
A Headbord Panel 1
B Footboard 1
C Leg Extension 2
D Slats 2
E Slats 1
F Foot 4
G Center Legs (Short) 4
H Center Legs (Middle) 4
6
I Center Legs (Long)
4
6
J Side Rail
1
6
K Side Rail 1
L Side Rail 1
M Side Rail 1
C
A

5
Assembly
1
AA
AA
F
Put out and discard the end cap on the headboard and attache leg
Extension(C) to the headboard (A) with short bolt(AA)
Attached Foot(F) to headboard with short bolt(AA) and tighten
with Allen Wrench(FF) after all bolts are completely lined up and
inserted into the holes.
2
Attach the foot(F) to the footboard with short bolt (AA)and tighten
with Allen Wrench(FF).
Attaching the headboard Attaching The Footboard
F
C
F
C
A
F
AA
F
F
B

6
Assembly
3
Attaching the Side Rails
Attach the side rails (K) and (M) with bolts (AA).
Attach the side rails (L) and (J) with bolts (AA).
Use Allen Wrench (FF) to tighten
4
Attaching the Side Rails
CAUTION: Two side rails should be same height position
The side rails can beassembled to three heightpositions. Select
the proper position toassemblethe side rail for your desired
mattress height. Attach the pre-assembled side rails to headboard and
footboard with bolts (AA). Use Allen wrench (FF) to tighten
High position
Middle position
Low position AA
AA
K
M
J
L
AA
AA
A
B
J
L
M
K

7
Assembly
5Attaching the Slats
Attach the slats (D)and (E) to side rails with bolts(AA).
Note slat (E) with 2 holes is the center slat.
Tighten with Allen wrench (FF).
AA
AA
6
Attaching the center legs
Attach the adjustable leveler(GG) to the center legs(G,H and I)
Attach the center legs(G,H or I) to the slats (D) and (E) with bolts (BB)
through part(HH). Attach the washer(CC) and nuts(DD),
Tighten with open spanner(EE) and allen key (FF)
Determine the correct center leg height depending on side rail
placement-low position, middle position, or high position.
G
H
I
GG
BB
HH
CC
DD
I
D
E
D
G
G
G
G

8
Assembly
7Finished -Tighten all bolts
Fully tighten all bolts previously installed with Allen Wrench.
Please use hand tools to assemble this product. Do not use power tools.
Tighten all the bolts only on a level surface.
CAUTION: Do not over tighten screws and bolts to avoid stripping.

9
Maintenance
□Check bolts/screws periodically and tighten them ifnecessary
Care and Cleaning
□Dust this item regularly with a soft, lint-freecloth toprevent soil build up.
Wipe away spillsimmediately to prevent staining using a clean cloth dampened with water.
□
□

Questions, problems, missing parts?
Before returning to the store, call Customer Service.
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-877-527-0313
HOMEDEPOT.COM
Retain this manual for future