Subaru 2004 LEGACY User manual

2004 Model Year
PDF Service Manual
GENERAL INFORMATION SECTION (Pub.No.G2320GE1)
ENGINE SECTION 1 (Pub.No.G2320GE2)
ENGINE SECTION 2 (Pub.No.G2320GE3)
ENGINE SECTION 3 (Pub.No.G2320GE4)
TRANSMISSION SECTION (Pub.No.G2320GE5)
CHASSIS SECTION (Pub.No.G2320GE6)
BODY SECTION (Pub.No.G2320GE7)
WIRING SYSTEM SECTION (Pub.No.G2320GE8)

FUJI HEAVY INDUSTRIES LTD. G2320GE1
2004 LEGACY SERVICE MANUAL QUICK REFERENCE INDEX
GENERAL INFORMATION
SECTION
This service manual has been prepared
to provide SUBARU service personnel
with the necessary information and data
for the correct maintenance and repair
of SUBARU vehicles.
This manual includes the procedures
for maintenance, disassembling, reas-
sembling, inspection and adjustment of
components and diagnostics for guid-
ance of experienced mechanics.
Please peruse and utilize this manual
fully to ensure complete repair work for
satisfying our customers by keeping
their vehicle in optimum condition.
When replacement of parts during
repair work is needed, be sure to use
SUBARU genuine parts.
All information, illustration and specifi-
cations contained in this manual are
based on the latest product information
available at the time of publication
approval.
FOREWORD FW
HOW TO USE THIS MANUALS HU
SPECIFICATIONS SPC
PRECAUTION PC
NOTE NT
IDENTIFICATION ID
RECOMMENDED MATERIALS RM
PRE-DELIVERY INSPECTION PI
PERIODIC MAINTENANCE SERVICES PM

FOREWORD FW
Page
1. Foreword....................................................................................................2

FW-2
FOREWORD Foreword
1. Foreword
A: FOREWORD
These manuals are used when performing mainte-
nance, repair, or diagnosis of Subaru LEGACY.
Applied model:
BL*****, BP***** from 2004MY
The manuals contain the latest information at the
time of publication. Changes in specifications,
methods, etc. may be made without notice.

HOW TO USE THIS MANUALS HU
Page
1. How to Use This Manuals...........................................................................2

HU-2
HOW TO USE THIS MANUALS How to Use This Manuals
1. How to Use This Manuals
A: HOW TO USE THIS MANUALS
1. STRUCTURE
Each section consists of SCT that are broken down
into SC that are divided into sections for each com-
ponent. The specification, maintenance and other
information for the components are included, and
the diagnostic information has also been added
where necessary.
2. CONTENTS
The first page has an index with tabs.

HU-3
HOW TO USE THIS MANUALS
How to Use This Manuals
3. COMPONENT
Illustrations are provided for each component. The information necessary for repair work (tightening torque,
grease up points, etc.) is described on these illustrations. Information is described using symbol.
To order parts, refer to parts catalogue.
Example:
HU-00017
(14)
(9)
(8)
(7)
(6)
(10)
(4) (10)
(22)
(11)
(19)
(17)
(15)
(13)
(12)
(18)
(16)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(11)
(10)
(9)
(12)
(13)
(19)
(18)
(20)
(17)
(16)
(24)
(10)
(25)
(5)
(4)
(4)
(4)
(3)
(3)
(3)
(2)
(1)
(21)
(15)
(23)
T7
T2
T2
T2
T2
T2
T2
T4
T5
T5
T8
T6
T6
T6
T11
T10
T1
T1
T3
T3
T3
T1
T9
T4
T5
T5 T3
T4
T3
T2
T4
T2
T1
T3
(20)
(21)
(23)
(22)
(10)
(24)
(25)
(26)
(35)
(34)
(27)
(14)
(28)
(29)
(31)
(32)
(37)
(30)
(33)
(36)
T3
T2
T1
:Selective part
:Replacement part
:Should be lubricated with grease.
:Should be lubricated with oil.
:Sealing point
:Tightening torque
....
,

HU-4
HOW TO USE THIS MANUALS How to Use This Manuals
4. SPECIFICATION
If necessary, specifications are also included.
5. INSPECTION
Inspections to be carried out before and after maintenance are included.
6. MAINTENANCE
• Maintenance instructions for serviceable parts describe work area and detailed step with illustration.It also
describes the use of special tool, tightening torque, caution for each procedure.
• If many serviceable partsare included in one service procedure,appropriate reference isprovided for each
parts.
Example:
(A) Component (D) Cautions (G) Tightening torque
(B) Process (E) Tool number of special tool (H) Illustration
(C) Reference (F) Name of special tool
HU-00020
1) Remove the manual transmission assembly
from vehicie. <Ref. to MT-33, REMOVAL, Manual
Transmission Assembly.>
15.Main Shaft Assembly for Sin-
gle-Range
A: REMOVAL
11) Tighten the lock nuts to the specified torque us-
ing ST1 and ST2.
NOTE:
Secure the lock nuts in two Places affer tightening.
ST2 499987003 SOCKET WRENCH
ST1 498937000 TRANSMISSION HOLDER
(A)
(B)
(C)
(D)
(G)
(E) (F)
(H)
Tightening torque:
118 N m (12.0 kgf-m, 86.8 ft-lb)
ST1
ST2

HU-5
HOW TO USE THIS MANUALS
How to Use This Manuals
7. DIAGNOSIS
Tables showing a step-by-step process make it
easy to conduct diagnosis.
8. SI UNITS
Measurements in these manuals are according to
the SI units. Metric and yard/pound measurements
are also included.
Example:
Tightening torque:
44 N
⋅ m (4.5 kgf-m, 33 ft-lb)
The figure used in these manuals are described in the SI units and conventional units are described in ( ).
Item SI units Conventional unit Remarks
Force N (Newton) kgf 1 kgf = 9.80655 N
Mass (Weight) kg, g kg, g
Capacity 2, m2or cm32or cc 1 cc = 1 cm3= 1 m2
Torque N⋅m kgf-m, kgf-cm 1 kgf-m = 9.80655 N⋅m
Rotating speed rpm rpm
Pressure kPa (kilopascal) kgf/cm21 kgf/cm2= 98.0655 kPa
mmHg 1 mmHg = 0.133322 kPa
Power W PS 1 PS = 0.735499 kW
Calorie W⋅h cal 1 kcal = 1.16279 W⋅h
Fuel consumption rate g/kw⋅hg/PS⋅h1g/PS⋅h=1.3596 g/kW⋅h

HU-6
HOW TO USE THIS MANUALS How to Use This Manuals
9. EXPLANATION OF TERMINOLOGY
•List
AAI : Air Assist Injection M/B : Main Fuse & Relay Box
A/B : Airbag MD : Mini Disc
ABS : Antilock Brake System MPI : Multi Point Injection
A/C : Air Conditioner MP-T : Multi-Plate Transfer
A/F : Air Fuel Ratio MT : Manual Transmission
ALT : Generator Non-turbo : Natural Aspiration
ASSY : Assembly NC : Normal Close (Relay)
AT : Automatic Transmission NO : Normal Open (Relay)
ATF : Automatic Transmission Fluid OP : Option Parts
BATT : Battery P/S : Power Steering
CD-R/RW : CD Recordable/Rewritable P/W : Power Window
CPU : Central Processing Unit PCD : Pitch Circle Diameter
DOHC : Double Overhead Camshaft PCV : Positive Crankcase Ventilation
DVD : Digital Versatile Disc RH : RH (Right Hand)
ECM : Engine Control Module (ECM) Rr : Rear
EGR : Exhaust Gas Recirculation SOHC : Single Overhead Camshaft
ELR : Emergency Locking Retractor SRS : Supplemental Restraint System
EX : Exhaust SSM : Subaru Select Monitor
F/B : Fuse & Joint Box ST : Special Tool
FL : Fusible Link SW : Switch
Ft : Full-time AWD TCS : Traction Control System
FWD : Front Wheel Drive TGV : Tumble Generated Valve
GPS : Global Positioning System T/M : Transmission
H/U : Hydraulic Unit ViS-C : Viscous Coupling
IG : Ignition VSV : Vacuum Switching Valve
INT : Intermittent VTD : Variable Torque Distribution
ISC : Idle Speed Control W/H : Wiring Harness
LH : LH (Left Hand) Pr : Primary
LSD : Limited Slip Differential 2ndr : Secondary

SPECIFICATIONS SPC
Page
1. LEGACY......................................................................................................2

SPC-2
SPECIFICATIONS LEGACY
1. LEGACY
A: DIMENSION
1. SEDAN MODEL
★1: With sunroof
2. WAGON MODEL
★1: With sunroof
3. OUTBACK MODEL
★1: With sunroof
Model 2.0 L SOHC 2.0 L DOHC turbo 2.5 L SOHC 3.0 L DOHC
Overall length mm (in) 4,665 (183.7)
Overall width mm (in) 1,730 (68.1)
Overall height (at C.W.) mm (in) 1,425 (56.1)
Compartment Length mm (in) 1,900 (74.8)
Width mm (in) 1,445 (56.9)
Height mm (in) 1,165 (45.9), 1,100 (43.3)★1
Wheelbase mm (in) 2,670 (105.1)
Tread Front mm (in) 1,495 (58.9)
Rear mm (in) 1,490 (58.7)
Minimum road clearance mm (in) 150 (5.9)
Model 2.0 L SOHC 2.0 L DOHC turbo 2.5 L SOHC 3.0 L DOHC
Overall length mm (in) 4,720 (185.8)
Overall width mm (in) 1,730 (68.1)
Overall height (at C.W.) mm (in) 1,470 (57.9)
Compartment Length mm (in) 1,840 (72.4)
Width mm (in) 1,445 (56.9)
Height mm (in) 1,190 (46.9), 1,145 (45.1)★1
Wheelbase mm (in) 2,670 (105.1)
Tread Front mm (in) 1,495 (58.9)
Rear mm (in) 1,485 (58.5)
Minimum road clearance mm (in) 150 (5.9) 155 (6.1) 150 (5.9)
Model 2.0 L SOHC 3.0 L DOHC
Overall length mm (in) 4,730 (186.2)
Overall width mm (in) 1,770 (69.7)
Overall height (at C.W.) mm (in) 1,545 (60.8)
Compartment Length mm (in) 1,840 (72.4)
Width mm (in) 1,445 (56.9)
Height mm (in) 1,190 (46.9), 1,145 (45.1)★1
Wheelbase mm (in) 2,670 (105.1)
Tread Front mm (in) 1,495 (58.9)
Rear mm (in) 1,485 (58.5)
Minimum road clearance mm (in) 200 (7.9)

SPC-3
SPECIFICATIONS
LEGACY
B: ENGINE
C: ELECTRICAL
★1: EC, EK model
Model 2.0 L SOHC 2.0 L DOHC turbo 2.5 L SOHC 3.0 L DOHC
Engine type Horizontally opposed, liquid cooled, 4-cylinder, 4-stroke gas-
oline engine
Horizontally
opposed, liquid
cooled, 6-cylin-
der, 4-stroke gas-
oline engine
Valve arrangement Overhead camshaft
Bore ×Stroke mm (in) 92 ×75 (3.62 ×2.95) 99.5 ×79.0
(3.917 ×3.110) 89.2 ×80.0 (3.512 ×3.150)
Displacement cm3(cu in) 1,994 (121.67) 2,457 (149.9) 3,000 (183.06)
Compression ratio 10.0 9.5 10.0 10.7
Ignition order 1 — 3 — 2 — 4 1 — 6 — 3 — 2 —
5 — 4
Idle speed at Park or Neutral
position rpm 650 650 650 650
Maximum output kW (PS)/rpm 101 (137)/5,600 180 (245)/6,400 121 (165)/5,600 180 (245)/6,600
Maximum torque N⋅m (kgf-m, ft-lb)/rpm 187 (19.1, 137.9)/
4,400 310 (31.6, 228.6)/ 2,400 226 (23.0, 166.7)/ 4,400 297 (30.3, 219.1)/ 4,200
Model 2.0 L SOHC 2.0 L DOHC turbo 2.5 L SOHC 3.0 L DOHC
Ignition timing (at idling) BTDC 13°14°13°15°
Spark plug Type and manufacturer CHAMPION:
RC10YC4 NGK:ILFR6B
CHAMPION:
RC10YC4
NGK:
PFR5B-11★1
NGK:ILFR6B
Generator 12V — 110A
Battery Type and capacity
(5HR)
EC,
EK,
K4
MT 12V — 48AH
(55D23L) —12V — 48AH
(55D23L) —
AT 12V — 52AH
(65D23L) —12V — 52AH (75D23L) 12V — 52AH (75D23L)
KA — 12V — 48AH
(55D23L) 12V — 27AH
(34B19L) 12V — 48AH (55D23L)
KS 12V — 27AH
(34B19L) —

SPC-4
SPECIFICATIONS LEGACY
D: TRANSMISSION
5MT: 5-forward speeds with synchromesh and 1-reverse
4AT: Electronically controlled fully-automatic, 4-forward speeds and 1-reverse
Model
SEDAN, WAGON
2.0 L SOHC 2.0 L DOHC
turbo 2.5 L SOHC 3.0 L
DOHC
Transmission type 4AT 5MT 5AT 4AT 5MT 5AT
Clutch type TCC DSPD TCC TCC DSPD TCC
Gear ratio
1st 2.785 3.454 3.540 2.785 3.454 3.540
2nd 1.545 1.947 2.264 1.545 2.062 2.264
3rd 1.000 1.366 1.471 1.000 1.448 1.471
4th 0.694 0.972 1.000 0.694 1.088 1.000
5th — 0.738 0.834 — 0.825,
0.780★10.834
Rev. 2.272 3.333 2.370 2.272 3.333 2.370
Auxiliary transmission gear
ratio★2High — 1,000 — — 1,000 —
Low — 1,447 — — 1,196 —
Reduction gear
(Front)
1st reduc-
tion Type of gear Helical — Helical Helical — Helical
Gear ratio 1.000 — 1.000 1.000 — 1.000
Final
reduction
Type of gear Hypoid Hypoid Hypoid Hypoid Hypoid Hypoid
Gear ratio 4.111 4.111 3.272 4.111 3.700,
4.111★13.083
Reduction gear
(Rear)
Transfer
reduction Type of gear — Helical — — Helical —
Gear ratio — 1.000 — — 1.000 —
Final
reduction
Type of gear Hypoid Hypoid Hypoid Hypoid Hypoid Hypoid
Gear ratio 4.111 4.111 3.272 4.111 3.700,
4.111★13.083
Model OUTBACK
2.5 L SOHC 3.0 L
DOHC
Transmission type 4AT 5MT 5AT
Clutch type TCC DSPD TCC
Gear ratio
1st 2.785 3.454 3.540
2nd 1.545 2.062 2.264
3rd 1.000 1.448 1.471
4th 0.694 1.088 1.000
5th — 0.825 0.834
Rev. 2.272 3.333 2.370
Auxiliary transmission gear
ratio★2High — 1,000 —
Low — 1,196 —
Reduction gear
(Front)
1st reduc-
tion Type of gear Helical — Helical
Gear ratio 1.000 — 1.000
Final
reduction
Type of gear Hypoid Hypoid Hypoid
Gear ratio 4.444 3.900,
4.111★13.272
Reduction gear
(Rear)
Transfer
reduction Type of gear — Helical —
Gear ratio — 1.000 —
Final
reduction
Type of gear Hypoid Hypoid Hypoid
Gear ratio 4.444 3.900,
4.111★13.272

SPC-5
SPECIFICATIONS
LEGACY
5AT: Electronically controlled fully-automatic, 5-forward speeds and 1-reverse
DSPD: Dry Single Plate Diaphragm
TCC: Torque Converter Clutch
★1: KA, K4 model
★2: Dual range model only
E: STEERING
F: SUSPENSION
G: BRAKE
H: TIRE
★1: KA model
Model SEDAN, WAGON
2.0 L SOHC 2.0 L DOHC turbo 2.5 L SOHC 3.0 L DOHC
Type Rack and Pinion
Turns, lock to lock 3.2 2.8 3.2 2.8
Minimum turning
diameter m (ft)
Center of tire
width to center of
tire width 10.8 (35.4)
Wall to wall 11.6 (38.1)
Model OUTBACK
2.5 L SOHC 3.0 L DOHC
Type Rack and Pinion
Turns, lock to lock 3.2
Minimum turning
diameter m (ft)
Center of tire
width to center of
tire width 10.8 (35.4)
Wall to wall 11.6 (38.1)
Front Macpherson strut type suspension
Rear Multi-link type suspension
Model Except for 2.0 L DOHC turbo 2.0 L DOHC turbo
Service brake system Dual circuit hydraulic with vacuum suspended power unit
Front Ventilated disc brake
Rear Disc brake Ventilated disc brake
Parking Brake Mechanical on rear brakes
Model SEDAN, WAGON OUTBACK
2.0 L SOHC 2.0 L DOHC
turbo 2.5 L SOHC 3.0 L DOHC 2.5 L SOHC 3.0 L DOHC
Wheel size 16 ×6 1/2JJ 17 ×7JJ 16 ×6 1/2JJ
17 ×7JJ 17 ×7JJ 16 ×6 1/2JJ 17 ×7JJ
Tire size 205/55 R16 89V 215/45 R17 87W 205/55 R16 89V
215/45 R17 87W 215/45 R17 87W 215/60 R16 95V
215/60 R16
95H★1
215/55 R17 94V
215/55 R17
93H★1
Type Steel belted radial, Tubeless

SPC-6
SPECIFICATIONS LEGACY
I: CAPACITY
★1: With ATF cooler (with warmer function)
★2: Dual range model only
Model 2.0 L SOHC 2.0 L DOHC turbo 4AT 5MT 5AT
LHD RHD LHD RHD
Fuel tank 2(US gal, Imp gal) 64 (16.9, 14.1)
Engine oil
Capacity(at
overhaul) 2(US qt, Imp qt) 4.5 (4.8, 4.0) 5.0 (5.3, 4.4)
Filling
amount of
engine oil
(at replace)
2(US qt, Imp qt) 4.0 (4.2, 3.5)
Transmission gear oil 2(US qt, Imp qt) — 3.5 (3.7, 3.1)
4.0 (4.2, 3.5)★2—
ATF 2(US qt, Imp qt) 8.4 (8.9, 7.4) — 9.8 (10.4, 8.6)
Front differential gear oil 2(US qt, Imp qt) 1.2 (1.3, 1.1) — 1.4 (1.5 1.2)
Rear differential gear oil 2(US qt, Imp qt) 0.8 (0.8, 0.7)
Power steering fluid 2(US qt, Imp qt) 0.8 (0.8, 0.7)
Engine coolant 2(US qt, Imp qt)
6.3
(6.7, 5.5)
6.7
(7.1, 5.9)★1
6.4
(6.8, 5.6)
6.8
(7.2, 6.0)★1
6.4
(6.8, 5.6) 6.5 (6.9, 5.7) 7.3 (7.7, 6.4)
Model 2.5 L SOHC 3.0 L DOHC 4AT 5MT 5AT
LHD RHD LHD RHD LHD RHD
Fuel tank 2(US gal, Imp gal) 64 (16.9, 14.1)
Engine oil
Capacity(at
overhaul) 2(US qt, Imp qt) 4.5 (4.8, 4.0) 7.2 (7.6, 6.3)
Filling
amount of
engine oil
(at replace)
2(US qt, Imp qt) 4.0 (4.2, 3.5) Approx. 5.5 (5.8, 4.8)
Transmission gear oil 2(US qt, Imp qt) — 3.5 (3.7, 3.1)
4.0 (4.2, 3.5)★2—
ATF 2(US qt, Imp qt) 9.3 (9.8, 8.2) — 9.8 (10.4, 8.6)
Front differential gear oil 2(US qt, Imp qt) 1.2 (1.3, 1.1) — 1.4 (1.5, 1.2)
Rear differential gear oil 2(US qt, Imp qt) 0.8 (0.8, 0.7)
Power steering fluid 2(US qt, Imp qt) 0.8 (0.8, 0.7)
Engine coolant 2(US qt, Imp qt)
6.3
(6.7, 5.5)
6.7
(7.1, 5.9)★1
6.4
(6.8, 5.6)
6.8
(7.2, 6.0)★1
6.4
(6.8, 5.6) 6.5 (6.9, 5.7)
7.2 (7.6, 6.3)
7.7
(8.1, 6.7)★17.8
(8.2, 6.9)★1

SPC-7
SPECIFICATIONS
LEGACY
J: WEIGHT
1. SEDAN MODEL
• LHD model
★1: For option code, refer to ID section. <Ref. to ID-5, MODEL NUMBER PLATE, IDENTIFICATION, Identification.>
Option code★1EC
Model
2.0 L SOHC
AWD
2.0 i
5MT (Single range)
Curb weight
(C.W.)
Front kgf (lb) 740 (1,631) 755 (1,664) 760 (1,676) 760 (1,676) 765 (1,686) 775 (1,709)
Rear kgf (lb) 590 (1,301) 590 (1,301) 590 (1,301) 590 (1,301) 605 (1,334) 615 (1,356)
Total kgf (lb) 1,330 (2,932) 1,345 (2,965) 1,350 (2,976) 1,350 (2,976) 1,370 (3,020) 1,390 (3,064)
Maximum
permissible
axle weight
(M.P.A.W.)
Front kgf (lb) 1,040 (2,293) 1,040 (2,293) 1,040 (2,293) 1,040 (2,293) 1,040 (2,293) 1,040 (2,293)
Rear kgf (lb) 1,060 (2,336) 1,060 (2,336) 1,060 (2,336) 1,060 (2,336) 1,060 (2,336) 1,060 (2,336)
Maximum
permissible
weight (M.P.W.) Total kgf (lb) 1,900 (4,189) 1,900 (4,189) 1,900 (4,189) 1,900 (4,189) 1,900 (4,189) 1,900 (4,189)
Option
Vehicle Dynamics
Control ——————
Cruise control — — — ❍❍❍
McIntoshaudio——————
Leather interior — — — — — —
Winter pack — — — ❍❍❍
15inchtire ——————
17inchtire —————❍
A/C — ❍❍❍❍❍
Side airbag ❍❍❍❍❍❍
Curtain airbag — — — — ❍❍
Sunroof ————❍❍
Navigation system — — ❍——❍
Selflevelizer——————

SPC-8
SPECIFICATIONS LEGACY
★1: For option code, refer to ID section. <Ref. to ID-5, MODEL NUMBER PLATE, IDENTIFICATION, Identification.>
Option code★1EC
Model
2.0 L SOHC
AWD
2.0 i
4AT
Curb weight
(C.W.)
Front kgf (lb) 760 (1,676) 775 (1,709) 780 (1,720) 780 (1,720) 785 (1,731) 795 (1,753)
Rear kgf (lb) 590 (1,301) 590 (1,301) 590 (1,301) 590 (1,301) 605 (1,334) 615 (1,356)
Total kgf (lb) 1,350 (2,976) 1,365 (3,009) 1,370 (3,020) 1,370 (3,020) 1,390 (3,064) 1,410 (3,109)
Maximum
permissible
axle weight
(M.P.A.W.)
Front kgf (lb) 1,040 (2,293) 1,040 (2,293) 1,040 (2,293) 1,040 (2,293) 1,040 (2,293) 1,040 (2,293)
Rear kgf (lb) 1,060 (2,336) 1,060 (2,336) 1,060 (2,336) 1,060 (2,336) 1,060 (2,336) 1,060 (2,336)
Maximum
permissible
weight (M.P.W.) Total kgf (lb) 1,900 (4,189) 1,900 (4,189) 1,900 (4,189) 1,900 (4,189) 1,900 (4,189) 1,900 (4,189)
Option
Vehicle Dynamics
Control ——————
Cruise control — — — ❍❍❍
McIntoshaudio——————
Leather interior — — — — — —
Winter pack — — — ❍❍❍
15inchtire ——————
17inchtire —————❍
A/C — ❍❍❍❍❍
Side airbag ❍❍❍❍❍❍
Curtain airbag — — — — ❍❍
Sunroof ————❍❍
Navigation system — — ❍——❍
Selflevelizer——————

SPC-9
SPECIFICATIONS
LEGACY
★1: For option code, refer to ID section. <Ref. to ID-5, MODEL NUMBER PLATE, IDENTIFICATION, Identification.>
Option code★1EC
Model
2.5 L SOHC
AWD
2.5 i
5MT (Single range)
Curb weight
(C.W.)
Front kgf (lb) 760 (1,676) 770 (1,698) 765 (1,686) 770 (1,698) 765 (1,686) 775 (1,709)
Rear kgf (lb) 600 (1,323) 605 (1,334) 600 (1,323) 605 (1,334) 605 (1,334) 610 (1,345)
Total kgf (lb) 1,360 (2,998) 1,375 (3,031) 1,365 (3,009) 1,375 (3,031) 1,370 (3,020) 1,385 (3,053)
Maximum
permissible
axle weight
(M.P.A.W.)
Front kgf (lb) 1,040 (2,293) 1,040 (2,293) 1,040 (2,293) 1,040 (2,293) 1,040 (2,293) 1,040 (2,293)
Rear kgf (lb) 1,060 (2,336) 1,060 (2,336) 1,060 (2,336) 1,060 (2,336) 1,060 (2,336) 1,060 (2,336)
Maximum
permissible
weight (M.P.W.) Total kgf (lb) 1,930 (4,255) 1,930 (4,255) 1,930 (4,255) 1,930 (4,255) 1,930 (4,255) 1,930 (4,255)
Option
Vehicle Dynamics
Control ——————
Cruise control ❍❍❍❍❍❍
McIntoshaudio——————
Leather interior — — — — ❍❍
Winter pack — — — — ❍❍
15inchtire ——————
17 inch tire — ❍—❍—❍
A/C ❍❍❍❍❍❍
Side airbag ❍❍❍❍❍❍
Curtainairbag——————
Sunroof ——————
Navigation system — — ❍❍❍❍
Selflevelizer——————