Summit LX85 User manual

OPERATOR
MANUAL
L 85
X
TM
www.summittractors.com
LOADER’S

OPERATOR’S MANUAL
Publication No.:
Revision: 00, Released: DEC-21
Summit Tractors LLC
3379 Peachtree Road NE Suite 555
Atlanta GA 30326
Summit LX85 Front End Loader

CONTENTS
1
2
3
4
14
15
18
22
22
23
24
25
26
28
35
44
1
Troubleshooting( for 3rd function valve)

The model and serial number is stamped on a plate on the outside of the right hand loader arm.
Please quote both numbers when ordering spare parts or accessories.
IDENTIFICATION
2
Location of Loader Serial Number

DESCRIPTION OF FRONT END LOADER
3
Level Indicator
7. Self leveling rods
8. Middle rockers
9. Front rockers
10. Front link
11. Parking legs
The front end loader is an attachment to a tractor, used for lifting & moving the loads. The front end loader is
activated by hydraulic cylinders powered by the tractor's hydraulic system and controlled by the operator. The
front end loader is attached to or detached from the tractor quickly & effortlessly by quick change system. The
support legs ensure that the detached front end loader is stable. The implements are connected to the front
end loader via quick change frame enable fast and safe implement change.
The front end loader consists of :
1
2
3
4
5
6
7
8
9
10
11
12
13
12. Parking leg storage
13. Cylinder lock

SAFETY INSTRUCTIONS
4
prevent

SAFETY INSTRUCTIONS
5
o
l
loader
o
om
m
Do not operate the loader with bare feet in any circumstance.
.
Danger -
a
Warning - Read and follow all instructions in the operators manual before
attempting to operate the tractor and the loader. failure to comply with the
instructions may result in the death or personal injury.

SAFETY INSTRUCTIONS
6
Summit Tractors
the Summit TX25 model.
Always keep the tractor and loader clean. Dust, grease or clipping accumulated
on tractor can lead to fire accidents, or personal injury
.
Make sure that the attachment is properly installed, adjusted and is in good
operating condition.
in
Do not modify the loader under any circumstance. Modification can drastically impact the
getting
meet the requirements in the operator’s manual or
o
section
protective gloves and necessary equipment required by local laws and

SAFETY INSTRUCTIONS
7
Only drive backwards with the bucket in this position.
See illustration.
contents
a
Max 10 km/h
Max 6 mile/h
6 mph/
the bucket.
Use left pedal as a brake.
.
ayour surroundings
If you have questions regarding the operating manual or require
additional information, contact www. Summittractors.com or
the Summit Connect APP.

8
SAFETY INSTRUCTIONS
front end loader
While traveling on road, please ensure that SMV( slow moving vehicle) emblem placed in

9
SAFETY INSTRUCTIONS
All gears and PTO should be in neutral position.
the loader h
front end loader is used.
eliminate falling
system.
ing pipes or connections unattended. Replace these parts with genuine

10
SAFETY INSTRUCTIONS
Left side view
Right side view
85
LX
85
LX

11
SAFETY INSTRUCTIONS
towards operator side.
Top view

12
SAFETY INSTRUCTIONS
.

SAFETY INSTRUCTIONS
This product can expose you to chemicals which is known to the state of California to cause cancer
and reproductive harm.
For more information got to www.P65Warnings.ca.gov
d.
9.
stop
13
.

A
SAFE WORKING LOADS
14
Summit
Summit
The control valve supplied with your loader with factory preset pressure. All the warranties will be voided
if the preset pressure is tampered.
.
Use cylinder lock at position “A” while maintenance or troubleshoot.

OPERATION
15
.
,
w
w
z
z
While operating on loose soil, slippery surface or on descending slope, follow the
below steps:-
in

16
OPERATION
LX85 551-661 Lbs (250-300 Kgs)
n
n
PS
front end loader
.
should be leak free.
attached with hitch.
The control lever of the loader is located at the right
side of operator’s seat. The preceding lever is used to
control the movement of the loader.
The
If

17
OPERATION
Oil top up is not required for this tractor on a loader assembly.
85
LX
Part description Torque
Grease nipple 12 Lbft / 16 Nm
Pin bolts 16 Lbft / 22 Nm