Summit FFRF24SS User manual

FROST-FREE
REFRIGERATOR-FREEZERS
Models:
FFRF24SS
FFRF24S1S
LFD24S1
BRF241FD
FFRF3070B
FFRF3075W
User Manual
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS.
Write Model and Serial Nos. (on lower left
corner of inside cabinet) here:
Model No.: _______________________
Serial No.: _______________________
Felix Storch, Inc.
An ISO 9001:2015 registered company
770 Garrison Ave
Bronx, New York 10474
www.summitappliance.com

2
TABLE OF CONTENTS
Appliance Safety 3
Important Safeguards 3-4
Location of Parts 5
Installation Instructions 6-8
Before Using your Appliance 6
Installation of your Appliance 6-7
Electrical Connection 7
Installing the Stainless Steel Handle 8
Operating your Appliance 9-11
Control Panel 9
Interior Light 10
Sabbath Mode 10
Temperature Memory Function 10
Defrosting 10
Using the Freezer 10
Temperature Alarm/Door Alarm 11
Door Lock 11
Shelves 11
Care and Maintenance 12
Cleaning your Appliance 12
Power Failure 12
Vacation Time 12
Moving your Appliance 12
Energy-Saving Tips 12
Troubleshooting 13-14
Limited Warranty 16

3
APPLIANCE SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read
and obey all safety messages.
This is the Safety Alert Symbol. The symbol alerts you to potential hazards that
can kill or injure you and others. All safety messages will follow the Safety
Alert Symbol and either the word DANGER or WARNING.
DANGER means that failure to heed this safety
statement may result in severe personal injury or
death.
WARNING means that failure to heed this safety
statement may result in extensive product
damage, serious personal injury, or death.
All safety messages will alert you about the potential hazard, tell you how to reduce the chance of injury,
and let you know what can happen if the instructions are not followed.
IMPORTANT SAFEGUARDS
Before the appliance is used, it must be properly positioned and installed as
described in this manual, so read the manual carefully. To reduce the risk of fire,
electrical shock or injury when using the appliance, follow basic precautions,
including the following:
·Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and do
not use an extension cord.
·Replace all panels before operating.
·It is recommended that a separate circuit serving only your appliance be provided. Use receptacles that
cannot be turned off by a switch or pull chain.
·Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or explosion.
And do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any
other appliance. The fumes can create a fire hazard or explosion.
·Do not connect or disconnect the electric plug when your hands are wet.
·Unplug the appliance or disconnect power before cleaning or servicing. Failure to do so can result in
electrical shock or death.
·Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in
this manual. All other servicing should be referred to a qualified technician.
·This appliance is CFC- and HFC-free and contains small quantities of Isobutane (R600a) which is
environmentally friendly, but flammable. It does not damage the ozone layer, nor does it increase the
greenhouse effect. Care must be taken during transportation and setting up of the appliance that no
parts of the cooling system are damaged. Leaking coolant can ignite and may damage the eyes.

4
·In the event of any damage:
- Avoid open flames and anything that creates a spark,
- Disconnect from the power supply,
- Air the room in which the appliance is located for several minutes, and
- Contact the Service Department for advice.
·The more coolant there is in an appliance, the larger the room it should be installed in. In the event of
a leakage, if the appliance is in a small room, there is the danger of combustible gases building up. For
every ounce of coolant at least 325 cubic feet of room space is required. The amount of coolant in the
appliance is stated on the data plate inside the appliance. It is hazardous for anyone other than an
Authorized Service Person to carry out servicing or repairs to this appliance.
·Take serious care when handling, moving and using the appliance to avoid either damaging the
refrigerant tubing or increasing the risk of a leak.
·Replacing component parts and servicing shall be done by factory authorized service personnel, so as
to minimize the risk of possible ignition due to incorrect parts or improper service.
FOLLOW WARNING CALLOUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL
·Use two or more people to move and install appliance. Failure to do so can result in back or other
injury.
·To ensure proper ventilation for your appliance, the front of the unit must be completely unobstructed.
Choose a well-ventilated area with temperatures above 61°F (16°C) and below 90°F (32°C).
·The appliance should not be located next to ovens, grills or other sources of high heat.
·The appliance must be installed with all electrical, water and drain connections in accordance with
state and local codes. A standard electrical supply (115 V AC only, 60 Hz), properly grounded in
accordance with the National Electrical Code and local codes and ordinances, is required.
·Do not kink or pinch the power supply cord of the appliance.
·The size of the fuse (or circuit breaker) should be 15 amperes.
·It is important that the appliance be leveled in order to work properly. You may need to make several
adjustments to level it.
·All installations must be in accordance with local plumbing code requirements.
·Make certain that the pipes are not pinched, kinked or damaged during installation.
·Check for leaks after connection.
·Never allow children to operate, play with or crawl inside the appliance.
·Do not use solvent-based cleaning agents or abrasives on the interior. These cleaners may damage
or discolor the interior.
·Use this appliance only for its intended purpose as described in this Instruction Manual.
·Keep fingers out of the “pinch point” areas. Clearances between the doors and between the doors
and cabinet are necessarily small. Be careful closing the door when children are in the area.
Risk of child entrapment!
Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are
still dangerous, even if they will “just sit for a few days”.
Before discarding your old refrigerator:
•Take off the doors
•Leave the shelves in place so that children may not easily climb inside.
- SAVE THESE INSTRUCTIONS -

5
LOCATION OF PARTS
MODEL FFRF24SS / FFRF24S1S / LFD24S1 / BRF241FD
LED Light
Wire Shelves (3)
Adjustable Legs
Door
Left Zone
(Freezer)
Handle
Glass Shelves (3)
Right Zone
Digital Control Panel
Security Lock
Ventilation Grille
(Refrigerator)
MODELS FFRF3070B / FFRF3075W
LED Light
Wire Shelves (3) Glass Shelves (3)
Right Zone
Digital Control Panel
Security Lock
Ventilation Grille
Adjustable Legs
Door
LED Light
(Refrigerator)
Left Zone
(Freezer)
Handle
Door Racks (2)

6
INSTALLATION INSTRUCTIONS
Before Using your Appliance
·Remove the exterior and interior packing.
CAUTION: After unpacking you MUST allow this appliance to stand upright for at least 2 hours to
allow the lubricant and refrigerant to drain back into the compressor and stabilize. Failure
to do so may adversely affect performance and the lifetime of the unit.
·Clean the interior surface with lukewarm water using a soft cloth.
·Install the handle on the door, if it is not already attached. (See Installing the Stainless Steel
Handles.)
Installation of your Appliance
·The appliance is designed for built-in, recessed or free standing installation for indoor use.
CAUTION: This appliance is not designed for the storage of medicine or other medical products.
·Place your appliance on a floor that is strong enough to support it when it is fully loaded. To level
the unit, adjust the front leveling legs.
·For free standing installation, 5”(127mm) of space between the back and sides of the unit, and
4” (102mm) at the top, are suggested, which allows the proper air circulation to cool the
compressor and condenser. Even for built-in installation, it is better to keep ¼” (6.35mm) space
on each side and at the top and 2” (51mm) at the rear. Take care that the air vent at the front of
the appliance is never covered or blocked in any way.
NOTE: It is recommended that you do not install the appliance near an oven, radiator or other
heating source. Direct sunlight may affect the acrylic coating and heat sources may increase
electrical consumption. Don’t install in a location where the temperature will fall below 61°F
(16°C). For best performance, do not install the appliance behind a cabinet door or block the
base grille.
·Avoid locating the unit in moist areas.
·Plug the appliance into an exclusive, properly grounded wall outlet.
Built-in Under-counter Instructions
Make sure your installation does not block the front ventilation
grille. The unit is designed to fit under worktops.
If the unit is fully integrated to be installed for fitting kitchen
plinth, make sure that the ventilation gaps in the plinth are at
least 300 square centimeters and remove the ventilation
grilles, so that warm air can disperse unhindered. Otherwise
the appliance has to work harder, resulting in an increase in
electricity consumption.
NOTE: When pushing the appliance into the niche, make sure
that the mains cable does not get trapped.

7
Model No.
a
(Inch/mm)
b
(Inch/mm)
c
(Inch/mm)
A
(Inch/mm)
B
(Inch/mm)
C
(Inch/mm)
FFRF24SS
34" / 864
23½" / 596
23½" / 595
34⅛" / 866
22⅞" / 580
23⅝" / 600
FFRF3070B
34" / 864
23½" / 596
29½" / 750
34⅛" / 866
23⅝" / 600
29¾" / 755
NOTE:
1. Models FFRF24S1S, LFD24S1 and BRF241FD have the same size as FFRF24SS.
2. Model FFRF3075W have the same size as FFRF3070B.
Electrical Connection
This appliance should be properly grounded for your safety. The power cord of this appliance is
equipped with a three-prong plug which mates with standard three-prong wall outlets to minimize the
possibility of electrical shock.
Do not under any circumstances cut or remove the third (ground) prong from the power cord
supplied. For personal safety, this appliance must be properly grounded. Any questions concerning
power and/or grounding should be directed toward a certified electrician or an authorized service
center.
This appliance requires a standard 115/120 Volt AC ~ 60Hz three-prong grounded electrical outlet.
Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly
grounded. When a standard 2-prong wall outlet is encountered, it is your responsibility and obligation
to have it replaced with a properly grounded 3-prong wall outlet.
To prevent accidental injury, the cord should be secured behind the appliance and not left exposed
or dangling.
The appliance should always be plugged into its own individual electrical outlet which has a voltage
rating that matches the rating label on the appliance. This provides the best performance and also
prevents overloading house wiring circuits that could cause a fire hazard from overheating. Never
unplug the appliance by pulling on the power cord. Always grip the plug firmly and pull straight out
from the receptacle. Repair or replace immediately all power cords that have become frayed or
otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at
either end. When moving the appliance, be careful not to damage the power cord.
Extension Cord
Because of potential safety hazards under certain conditions, it is strongly recommended that you do
not use an extension cord with this appliance. However, if you must use an extension cord, it is
absolutely necessary that it be a UL/CUL-Listed, 3-wire grounding type appliance extension cord
having a grounding type plug and outlet and that the electrical rating of the cord be 115 volts and at
least 10 amperes.
WARNING
Improper use of the grounded plug can result in the risk of electrical shock. If the power cord
is damaged, have it replaced by a qualified electrician or an authorized service center.

8
Installing the Stainless Steel Handles
This appliance includes two stainless steel handle that are not
required to operate the unit. To install each handle, follow the
instructions below:
1. Remove the door gasket 2on the side you wish to install the
handle - you can see two holes designated for handle
installation.
2. Install the handle 4 tightly as shown here with two screws 1
and flat washers 3provided.
3. Replace the door gasket.

9
OPERATING YOUR APPLIANCE
It is recommended you install the appliance in a place where the ambient temperature is between
61º and 90ºF (16º to 32ºC). If the ambient temperature is above or below the recommended
temperatures, the performance of the unit may be affected. For example, placing your unit in
extremely cold or hot conditions may cause interior temperatures to fluctuate. The operating
temperature range may not be reached.
Control Panel
ON/OFF Power
To turn the appliance off, press and hold the key for 5 seconds until the temperature display goes
off. To turn the appliance on, press and hold the key for 1 second until the temperature display
lights up.
NOTE: Pressing the POWER key once can switch off the audible alarm when the alarm is on.
UP
Used to increase (warm) the set temperature by 1°C/1ºF.
DOWN
Used to decrease (cool) the set temperature by 1°C/1ºF.
Indicator Light
The indicator light is the dot located at the bottom right corner of the display. The indicator light will
be on when a multi-key function is selected. To perform a multi-key function, press and hold the first
key, then press the second key for at least 5 seconds and then release both keys.
ºF/ºC Selector
Select the temperature display setting in Fahrenheit or Celsius degree.
Setting the Temperature Control
•The unit has two separate temperature compartments. You can set the temperature of the right
compartment (refrigerator) by touching the right UP and DOWN symbols and set the temperature
of the left compartment (freezer) by touching the left UP and DOWN symbols. When you touch
either key for the first time, the LED readout will show the original temperature set previously.
(The temperature preset at the factory is 38°F/3°C for refrigerator compartment and 0°F/-18°C
for freezer compartment.)
•The temperature you are setting will increase by one degree each time you touch the UP symbol
and will decrease by one degree each time you touch the DOWN symbol.
•The range of the temperature control is from 36°F/2°C to 43°F/6°C for refrigerator compartment
and from -11°F/-24°C to 11°F/-12°C for freezer compartment.
•To view the set temperature at any time, touch the UP or DOWN symbol. The set temperature
will temporarily flash in the display window for 5 seconds. Then the display shows the current
inner temperature again.

10
Interior Light
The unit is equipped with the interior LED lights which will be turned ON when a door is opened. The
LED type lights are designed for extremely long life. They are not user serviceable. To change them
please contact the service department.
NOTES: Please use only the original LED light fittings provided by the manufacturer.
Sabbath Mode
Sabbath Mode is available for the observance of certain religious holidays. This mode turns off the
displays, interior light and audible alarms and prevents them from turning on again. Normal cooling
operations will still take place.
To initiate Sabbath Mode, press the POWER and ºC/F keys at the same time for at least 5 seconds.
The displays and interior lights will go off to confirm that the Sabbath Mode is ON.
Sabbath Mode can be canceled by repeating the above process. The Sabbath Mode will
automatically turn off after 96 hours.
Temperature Memory Function
In the event of a power interruption (power surge, breaker switch, etc.), the unit can remember the
previous temperature settings, and when the power is recovered, the cabinet temperature will return
to the same setting temperature as before the power went off.
Defrosting
•The unit defrosts automatically in normal operating conditions.
•The evaporator behind the rear wall of the unit defrosts automatically. The condensate collects in
the drainage channel behind the rear wall of the unit, and flows through the drainage hole into the
drip tray by the compressor where it evaporates.
•However, frost may accumulate on the evaporator if the unit is repeatedly opened in a high heat
or high humidity location. If this frost pattern does not clear within 24 hours, your unit will require
manual defrosting.
Using the Freezer
•The freezer is designed for the long-term storage of frozen food. Storage time is up to three
months.
•The storage life of frozen foods varies and the recommended storage time should not be exceeded.
•Pre-packaged commercially frozen food should be stored in accordance with the frozen foods
manufacturer’s instructions for a three-star frozen food storage compartment or home freezer.
•Place frozen food into the freezer as quickly as possible after purchase. If there are instructions
on the packet, carefully follow these instructions regarding storage times.
NOTES:
•If the unit is unplugged, or power is lost or turned off, you must wait 3 to 5 minutes before
restarting the unit. If you attempt to restart before this time delay, the unit will not start.
•When you use the unit for the first time or restart the unit after it has been shut off for a long
time, there could be a few degrees variance between the temperature you select and the one
indicated on the LED readout. This is normal and is due to the length of the activation time.
There should not be a problem once the unit has been running for a few hours.

11
Temperature Alarm/Door Alarm
•An audible alarm sounds if the storage temperature is not cold enough. The temperature display
flashes at the same time.
•The cause of the temperature being too high may be:
- Warm fresh food was placed inside
- Too much warm ambient air flowed in when rearranging or removing food
- Power failure for some time
- The appliance is faulty
•The audible alarm is automatically silenced and the temperature display stops flashing when the
temperature is sufficiently cold again.
•If a door has been left open for more than 60 seconds, the alarm will sound. Pressing the POWER
key once can switch off the audible alarm.
Door Lock
Your unit is provided with a security lock and key combination. The keys are located inside the
plastic bag that contains the Instruction Manual. Insert the key into the lock and turn it counter-
clockwise to unlock the door. To lock the door, do the reverse operation, making sure the metal pin
is engaged completely. Remove the key and put it in a secure place for safekeeping.
Shelves
To prevent damaging the door gasket, make sure to have the door all the way open when pulling the
shelves out of the rail compartment.
·Any of the shelves can be removed to store larger items.
·When removing the shelf out of the rail compartment,
make sure to remove all items first. Then move the
shelf to the position where the notch of the shelf is
exactly under the plastic post and lift the shelf. In order
to replace the shelf, repeat steps described above in
reverse.

12
CARE AND MAINTENANCE
Cleaning your Appliance
·Turn off the power, unplug the appliance, and remove all items, including shelves.
·Wash the inside surfaces with a solution of warm water and baking soda (about 2 tablespoons of
baking soda to a quart of water).
·Wash the shelves with a mild detergent solution.
·Wring excess water out of the sponge or cloth when cleaning the area where the controls are
located, or any electrical parts.
·Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry
with a clean soft cloth.
·Use an approved stainless steel cleaner to clean the doors and handles. Do not use steel wool
or a steel brush on the stainless steel.
CAUTION: Failure to unplug the appliance during cleaning could result in electrical shock or other
personal injury.
Power Failure
Most power failures are corrected within a few hours and should not affect the temperature of your
appliance if you minimize the number of times the doors are opened. If the power is going to be off
for a longer period of time, you need to take the proper steps to protect the contents.
Vacation Time
·Short vacations: Leave the appliance operating during vacations of less than three weeks.
·Long vacations: If the appliance will not be used for several months, remove all items and turn
off the appliance. Clean and dry the interior thoroughly. To prevent odor and mold growth, leave
the doors open slightly, blocking them open if necessary.
Moving your Appliance
1. Remove all items.
2. Securely tape down all loose items (shelves) inside the appliance.
3. Turn the adjustable legs up to the base to avoid damage.
4. Tape the doors shut.
5. Be sure the appliance stays secure in the upright position during transportation. Also, protect the
outside of the appliance with a blanket or similar item.
Energy-Saving Tips
·The appliance should be located in the coolest area of the room or outdoor location, away from
heat-producing appliances and out of direct sunlight.
·Ensure that the unit is adequately ventilated. Never cover air vents.
·Do not keep the doors open any longer than necessary.
·Let hot foods cool to room temperature before placing in the unit. Overloading the unit forces the
compressor to run longer.
·Be sure to wrap foods properly, and wipe containers dry before placing them in the unit. This cuts
down on frost build-up inside the unit.
·Unit shelves and storage bins should not be lined with aluminum foil, wax paper, or paper toweling.
Liners interfere with cold air circulation, making the unit less efficient.
·Organize and label food to reduce door openings and extended searches. Remove as many items
as needed at one time, and close the door as soon as possible.

13
TROUBLESHOOTING
You can solve many common problems easily, saving you the cost of a possible service call. Try the
suggestions below to see if you can solve the problem before calling the servicer.
PROBLEM
POSSIBLE CAUSE
REMEDY
Appliance
does not
operate.
Appliance is not connected to a power
supply.
The appliance is turned off.
Tripped circuit breaker or a blown fuse.
Connect the appliance.
Switch on the appliance.
Switch on circuit breaker or replace
fuse.
Appliance is
not cold
enough.
The temperature is not set correctly.
The ambient temperature could require
a lower temperature setting.
The doors were opened too often.
A door was not closed completely.
Doors are not hermetically sealed.
The condenser is too dirty.
The ventilation opening is blocked or too
dusty.
Check the set temperature.
Set a lower temperature.
Do not open the doors more often
than necessary.
Close door properly.
Check the door seal and clean or
replace.
Clean the condenser when necessary.
Clear the obstructions and clean the
dust.
Appliance
turns itself on
and off
frequently.
The room temperature is higher than
average.
A large amount of food has been added
to the unit.
The doors are opened too often.
A door is not closed completely.
A door gasket is not sealing properly.
Put the appliance in a cooler place.
Leave the appliance to work for a
while until the set temperature has
been reached.
Do not open the doors more often
than necessary.
Close door properly.
Check the door seal and clean or
replace.
The light does
not work.
Appliance is not connected to a power
supply.
Tripped circuit breaker or a blown fuse.
The light was switched off on the control
panel.
Connect the appliance.
Switch on circuit breaker or replace
fuse.
Switch on the light.
Vibrations
The appliance is not properly leveled.
Level the appliance with the
adjustable feet.
The appliance
seems to
make too
much noise.
A rattling noise may come from the flow of the refrigerant, which is normal. As
each cycle ends, you may hear gurgling sounds caused by the flow of
refrigerant in your appliance.
If temperature fluctuations occur, the contraction and expansion of the inner walls
may cause popping and crackling noises.
The appliance is not properly level.
Level the appliance with the
adjustable feet.
The doors will
not close
properly.
The appliance is not properly level.
The gaskets are dirty.
The shelves are out of position.
Level the appliance with the
adjustable feet.
Clean the door gaskets.
Check the shelves and refit correctly.
Display “E0”,
“E1”. “E2”,
“E0” indicates a communication error for
3-zone models.
Call for service.

14
“E3”, “E4”,
“E5”or “E7”.
“E1” or “E2” indicates that the air
temperature sensor has failed.
“E3” or “E4” indicates that the defrost
sensor in the evaporator has failed.
“E5” indicates a defrost heater failure.
“E7” indicates a door switch failure.
The alarm
sounds and
the
temperature
display
flashes.
Has an appliance door been open for
longer than 60 seconds? If not, then
the temperature has risen higher or
fallen lower than the temperature that
has been set. This could be due to:
The appliance door being opened too
often.
The ventilation opening being covered
or too dusty.
A lengthy interruption in the power
supply.
A large amount of food has been added
to the unit.
If yes, close the door.
Do not open the door more often than
necessary.
Clear the obstructions and wipe off
the dust.
Leave the appliance to work for a
while until the set temperature has
been reached.
The icon “--”
is lit and
flashing in the
temperature
display.
The display temperature is out of range.
Only temperatures within the range
-49~99°F/-45~37°C can be
displayed. If the temperature is not
within this range, the icon “--” will be
displayed instead. This is normal.
If you've checked the table above and find that you still need help with your appliance, call our
Customer Service facility at 800-932-4267 between 9:00AM and 5:00PM ET. We will do our best to
answer your questions.
CALIFORNIA CARB/SNAP DISCLOSURE
This product uses eco-friendly hydrocarbon refrigerant and fully complies with California
CARB regulations.
However, we are required by California Law to provide the following disclosure statement in
every product sold in California.
"This equipment is prohibited from use in California with any refrigerants on the 'List of Prohibited
Substances' for that specific end-use, in accordance with California Code of Regulations, title 17,
section 95374. This disclosure statement has been reviewed and approved by Felix Storch, Inc.
and Felix Storch, Inc. attests, under penalty of perjury, that these statements are true and
accurate."
This product does not use any refrigerants on the 'List of Prohibited Substances'"

15
NOTES

16
LIMITED WARRANTY
ONE-YEAR LIMITED WARRANTY
Within the 48 contiguous United States, for one year from the date of purchase, when this appliance is
operated and maintained according to instructions attached to or furnished with the product, warrantor will
pay for factory-specified parts and repair labor to correct defects in materials or workmanship. Service
must be provided by a designated service company. Outside the 48 states, all parts are warranted for one
year from manufacturing defects. Plastic parts, shelves and cabinets are warranted to be manufactured to
commercially acceptable standards, and are not covered from damage during handling or breakage.
5-YEAR COMPRESSOR WARRANTY
1. The compressor is covered for 5 years.
2. Replacement does not include labor.
ITEMS WARRANTOR WILL NOT PAY FOR:
1. Service calls to correct the installation of your appliance, to instruct you how to use your appliance, to
replace or repair fuses or to correct wiring or plumbing.
2. Service calls to repair or replace appliance light bulbs or broken shelves. Consumable parts (such as
filters) are excluded from warranty coverage.
3. Damage resulting from accident, alteration, misuse, abuse, fire, flood, acts of God, improper
installation, installation not in accordance with electrical or plumbing codes, or use of products not
approved by warrantor.
4. Replacement parts or repair labor costs for units operated outside the United States.
5. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.
6. The removal and reinstallation of your appliance if it is installed in an inaccessible location or is not
installed in accordance with published installation instructions.
DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES
CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE
PRODUCT REPAIR AS PROVIDED HEREIN. IMPLIED WARRANTIES, INCLUDING WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR.
WARRANTOR SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME
STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES OF MERCHANTABILITY
OR FITNESS, SO THESE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU. THIS
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS,
WHICH VARY FROM STATE TO STATE.
For parts and accessory ordering,
troubleshooting and helpful hints, visit:
www.summitappliance.com/support
Felix Storch, Inc.
An ISO 9001:2015 registered company
770 Garrison Ave
Bronx, New York 10474
www.summitappliance.com
WARNING: This product can expose you to chemicals including Nickel
(Metallic) which is known to the State of California to cause cancer.
For more information go to www.P65Warnings.ca.gov
Note: Nickel is a component in all stainless steel and some other metallic compositions.