sundays DIN-SH-006-024 User manual

EASY EDGE DINING TABLE
ASSEMBLY INSTRUCTIONS
DIN-SH-006-024

No. Description
PARTS AND HARDWARE LIST
Image Qty
1 8
4
1
1
2
3
A
B
C
D
TABLE TOP BOLT M8x35
BOLT M8x15
ALLEN WRENCH M4BASE
SEMI TOP
METAL PLATE
1
1
1
No. Description Image Qty
*** CAUTION
STEP 1:
Please check and make sure correct side of component is in place before tightening the bolts .
Attach the semi Top to the corresponding
pre-drilled holes on the base, using bolts (1)
and allen key turning in a clockwise direction
until tight .
STEP 3:
Attach the metal plate to the corresponding pre-drilled holes on the base, using bolts (2)and allen key
turning in a clockwise direction until tight .
WWW.SUNDAYS-COMPANY.COM
STEP 2:
Turn over the base into the table top .Then attached
to the corresponding pre-drilled holes on table top.
Using bolts (1) and allen key turning in a clockwise
direction until tight .
B
C
Top
Top
Bottom
A
Bottom
D