SunEyes H Series User manual

P2P IP/Network Camera
SunEyes H Series
Quick Installation Guide

1．Hardware Installation
First connect the Power Supply and then connect the IP camera and router via
network cable.
Warm: Please use the provided power adapter. Unauthorized
power adapter may damage the IP Camera
Note: The IP camera can be reset to factory setting by pressing the reset button for
about 10 seconds when the power is on. The reset button can be found on the
bottom of the camera.
For the First Time Settings,The IP Camera ,PC and phone should be in the
same LAN,use the same router.
LAN Cable
connect with
Router LAN Port
LAN Cable
connect to the
Camera RJ45

2．View via Android mobile phone or Iphone/Ipad .
Install the App(there are three way can find suneyes app)：
Android APP:
①Search “ SunEyes ” from the GooglePlay App Store.
②Visit the URL: http://cd.suneyes.hk/H/en/index.htm
③ Scan follow the instruction to download the SunEyes APP.
Iphone/Ipad APP:
①Search “ SunEyes ” from the iTunes App Store.
②Visit the URL: http://cd.suneyes.hk/H/en/index.htm
③ Scan follow the instruction to download the SunEyes APP.

" SunEyes " will be shown on the phone Run the software and click “Add”
Click “scan”, and then point the phone camera towards to the UID sticker.

The UID can be found on the label on the bottom of the camera. After a “beep”
sound, the UID is scanned successfully.
You also can click “search” to add cameras in the LAN.
You also can write it into it manually
The default password is: (no password,leave it blank) .
Live Video Functions:
①If the camera has Pan/Tilt function, users can slide up and down the video screen
to control the camera rotate.
② Control the auto Pan/Tilt(Camera Should Support Pan/Tilt)
③ Control the Image Mirror
④ Control the two way audio functions.
⑤ Take Photo of the camera.

⑥ Record Video to the Phone.
⑦ Control the Camera Resolution and Smooth.
⑧ Control Camera Preset Postio

WIFI Setup
Click the icon “Setting” and “Wifi Setting”, then the Manage the Wifi
Network. Click Your SSID, and input WIFI password, click "OK". Then unplug
the camera's network cable, the camera will restart, then can connect to the WiFi.
Note: Other functions you can test and try yourself , like the password
change,alarms setting,time settings,tf card settings,and other settings,etc

1. Visit WIFI Setup http://cd.suneyes.hk/H/doc/SunEyes%20PC.exe to
download and Install PC client.
2. Click "Device Set", to connect camera.
Add cameras in LAN: click “Search” button and select the cameras.
Double Click the Camera ,then Click OK to ADD.
Add cameras in WAN: Input DID Manually(DID can be found on the bottom of
the camera or Color Box Label)
Default password: (blank)
4．View via PC

3. Click "OK" to confirm add camera.
Use mouse drag the camera to the windows will be ok.