SunEyes p2p User manual

P2P IP/Network Camera
SunEyes
Quick Installation Guide

1．Hardware Installation
First connect the Power Supply and then connect the IP camera and router via
network cable.
Warm: Please use the provided power adapter. Unauthorized
power adapter may damage the IP Camera
Note: The IP camera can be reset to factory setting by pressing the reset button for
about 10 seconds when the power is on. The reset button can be found on the
bottom of the camera.
For the First Time Settings,The IP Camera ,PC and phone should be in the
same LAN,use the same router.
LAN Cable
connect with
Router LAN Port
LAN Cable
connect to the
Camera RJ45

2．View via Android mobile phone or Iphone/Ipad .
Install the App(there are three way can find suneyes app)：
Android APP:
①Search “ SunEyes T ” from the GooglePlay App Store.
②Visit the URL: http://cd.suneyes.hk/TP/en/index.htm；
③ Scan follow the instruction to download the SunEyes T APP.
Iphone/Ipad APP:
①Search “ SunEyes T ” from the iTunes App Store.
②Visit the URL: http://cd.suneyes.hk/TP/en/index.htm；
③ Scan follow the instruction to download the SunEyes T APP.

" SunEyes T" will be shown on the phone Run the software and click “Add”
Click “scan”, and then point the phone camera towards to the UID sticker.
The UID can be found on the label on the bottom of the camera. After a “beep”
sound, the UID is scanned successfully.
You also can click “search” to add cameras in the LAN.
You also can write it into it manually
The default password is: 888888 .

Live Video Functions:
①If the camera has Pan/Tilt function, users can slide up and down the video screen
to control the camera rotate.
② Control the auto Pan/Tilt(Camera Should Support Pan/Tilt)
③ Control the Brightness, contrast, mirror, reset, frequency, IR switch
④ Control the preset functions.
⑤ Control the Two Way Audio (Camera should support audio)
⑥ Snapture and Record Video to the Phone.
⑦ Control Optical Zoom(Camera Should Support Zoom)
⑧ Control Camera Resolutions.

WIFI Setup
Click the icon “Setting” and “Wifi Setting”, then the Router SSID list will
pop up. Click the right SSID, and input WIFI password, click "OK". Then unplug
the camera's network cable, the camera will restart, then can connect to the WiFi.
PlayBack Video from TF Card
Click the icon “check Camera TF Record” and then the App will Get the
TF Card Recording Video
Note: Other functions you can test and try yourself , like the password
change,alarms setting,time settings,tf card settings,and other settings,etc

1. Visit http://cd.suneyes.hk/TP/en/index.htm to download and Install PC client.
2. Click "Add Camera", to connect camera.
Add cameras in LAN: click “Find” button and select the cameras.
Add cameras in WAN: Input UID Manually(UID can be found on the bottom of
the camera or Color Box Label)
Default password: 888888
3. Click "OK" to confirm add camera.
4．View via PC

4.Right click the windows and click the “Start”
5. Right Click the Video,Enter: Camera Options,The you can find the “SetWifi”
Remarls: Left Click the Video Can appear the PTZ Control Panel