SunEyes SP-V1810W User manual

Quick Start Guide
1/ 12
Quick Start Guide
Of Household
HD IP Cameras
V 2.1
More information can be downloaded at www.ipcam.xin

Quick Start Guide
2/ 12
This manual applies to our household series IP cameras.
Please download the correct product CD information at www.ipcam.xin
before operating the camera.
Recommended operating the IP camera according to the content below.
Content
1. About camera 3
2. Connect camera 3
3. View via mobile phone 6
4. View via PC 7
5. Set WIFI 9
6. Set Micro SD card records 9
7. Reboot and restore factory setting 11
8. More info 12

Quick Start Guide
3/ 12
1.About camera
1.1 Product introduction.
This is a digital HD IP camera for monitoring. It connects to the Internet to
send and receive data, and you can use it to remotely view real-time images
from your mobile phone, computer or other device anytime and anywhere, it
can save surveillance videos in the Micro SD card, computer or other device
such as an NVR, The camera also supports alarm functions such as sending
alarm emails, alarming cell phone message push and other functions.
1.2 Product should contain：
IP Camera*1 Power adapter*1
User manual*1 Network cable*1
Bracket*1 Screws bag*1
1.2 Interface.
Micro SD Card Slot
Reset Button
RJ45 Interface
Power

Quick Start Guide
4/ 12
2.Connect camera
2.1 Plug in power adapter and connect to camera, you can not connect the
network cable.
2.2 Camera will self test for one minute, then insistently give out the "ding-
ding-ding…" sound.
2.3 Download “CamHi” from Google Play Store / Apple App Store or scan the
QR code below to get APP information.
If you don't hear “ding-ding-ding…”
sound, please reset the camera
until hear the sound.
If you use a network cable to connect the camera to the router(The
router must be able to connect to the Internet), you can jump directly
to “3. View via mobile phone”.

Quick Start Guide
5/ 12
Android IOS
2.4 Run APP and configure the WIFI of camera then follow the steps below.
1. click “Add
camera”
2. click “WIFI
Installation”
4. click “YES”
3. enter WIFI
password
and click
“Set”
Make sure your phone is connected to WIFI and can connect to the
internet.
Your WIFI name must be english and can not contain special characters.

Quick Start Guide
6/ 12
3.View via mobile phone
3.1 Run APP then follow the steps below.
5. wait until camera
WIFI connection
completed
1. click “Add
camera”
2. Click here to
Search camera
And you can quickly enter
the UID by scanning the
QR code on the camera's
label, as shown below
When the camera sends a “Dong—” tone, it
means that the camera is connected to your
WIFI, and the operation will jump to “3.
View via mobile phone” step 3 of 3.1.

Quick Start Guide
7/ 12
4.View via PC
4.1 Install the “Search tool” from the CD, then run it to find the cameras.
4.2 Access to the camera through browser on windows PC.
Detailed instructions for CamHI are available in the CD.
3. click UID to
add camera
4. click
“Done”
5. click online
camera to monitor
2. double click camera
information to run browser to
access the camera
1. Click "Refresh" to
find the camera

Quick Start Guide
8/ 12
4.3 Connect and manage the multiple cameras via CMS on windows PC!
In browser you can view image and configure all parameters of camera.
if you do not use IE browser some settings will be missing.
CMS installation packages and instructions are available in the CD.

Quick Start Guide
9/ 12
5.Set WIFI
5.1 Set WIFI on phone.
6.Set Micro SD card record
6.1 Set motion detection alarm recording on the phone.
WIFI name must be english and can not contain special characters.
After the WIFI setting, if the camera is not connected to the network
cable, it will automatically switch to WIFI connection.
1. click here then
into setting page
2. click “WI-FI
Setting”
3. select WIFI
and enter
password

Quick Start Guide
10 / 12
6.2 Set schedule recording on phone.
1. open the
“Motion Detection”
2. open the
“Alarm SD REC”
3. check the SD
card is available
1. open “Enable
Record”
2. check the SD
card is available
Motion detection alarm recording is recommended when the
memory of Micro SD card is small.

Quick Start Guide
11 / 12
6.3Playback record on phone.
7.Reboot and restore factory settings
7.1 Reconnect the power to restart the camera.
7.2 Press and hold the reset button for 5 seconds and the camera will restore
1. click here to
enter record page
2. click online
camera
3. Play or download
video files
These parameters can be set in more detail via IE browser on the PC!

Quick Start Guide
12 / 12
to factory settings.
8.More info
This manual is to help customers to know and use the camera quickly, For
detailed instructions and video tutorials please refer to the content of CD
information at www.ipcam.xin.
This manual may have descriptions and operations that do not match the
product, If you have any questions or need technical support Please feel free
to contact us or our dealers.
Reset Button
Reset Button
Also you can restart or reset the camera via mobile phone or PC.