Sunny Health & Fitness SF-XF920025 User manual

MULTIFUNCTION WEIGHT
& DUMBBELL RACK
SF-XF920025
USER MANUAL
IMPORTANT! Please retain owner’s manual for maintenance and adjustment
instructions. Your satisfaction is very important to us,PLEASE DO NOT RETURN
UNTIL YOU HAVE CONTACTED US:[e-mail] or 1- 877 -
90SUNNY (877-907-8669).

1
IMPORTANT SAFETY INFORMATION
We thank you for choosing our product. To ensure your safety and health, please use this
equipment correctly. It is important to read this entire manual before assembling and using
the equipment. Safe and effective use can only be achieved if the equipment is assembled,
maintained, and used properly. It is your responsibility to ensure that all users of the
equipment are informed of all warnings and precautions.
1. Before starting any exercise program, you should consult your physician to determine if
you have any medical or physical conditions that could put your health and safety at risk
or prevent you from using the equipment properly. Your physician’s advice is essential if
you are taking medication that affects your heart rate, blood pressure, or cholesterol
level.
2. Be aware of your body’s signals. Incorrect or excessive exercise can damage your
health. Stop exercising if you experience any of the following symptoms: pain, tightness
in your chest, irregular heartbeat, shortness of breath, lightheadedness, dizziness, or
feelings of nausea. If you do experience any of these conditions, you should consult
your physician before continuing with your exercise program.
3. Keep children and pets away from the equipment. The equipment is designed for adult
use only.
4. Use the equipment on a solid, flat level surface with a protective cover for your floor or
carpet. To ensure safety, the equipment should have at least 2 feet (60 CM) of free
space all around it.
5. Ensure that all nuts and bolts are securely tightened before using the equipment. The
safety of the equipment can only be maintained if it is regularly examined for damage
and/or wear and tear.
6. Always use the equipment as indicated. If you find any defective components while
assembling or checking the equipment, or if you hear any unusual noises coming from
the equipment during exercise, discontinue use of the equipment immediately and do
not use until the problem has been rectified.
7. Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may
become entangled in the equipment.
8. Do not place fingers or objects into the moving parts of the equipment.
9. The maximum weight capacity of this stand is 2645 pounds (1200 KG). The equipment
is not suitable for therapeutic use.
10.To avoid bodily injury and/or damage to the product or property, proper lifting and
moving are required.
11.Your product is intended for use in cool and dry conditions. You should avoid storage in
extreme cold, hot or damp areas as this may lead to corrosion and other related
problems.
12.This equipment is designed for indoor and home use only; it is not intended for
commercial use.

2
EXPLODED DIAGRAM
1
2
2
2
2
2
2
2
2
3
4
5
5
6
7
7
7
7
8
8
8
9
9
9
10
10
11
11
11
11
12
12
12
13
13
13
14
14
14
15
15
15
16
16
16
17
17
17
17
17
17
17
17
17
17
17
17
18
18
18
18
18
18
18
18
18
18
18
18
18
23
20
19
19
23
20
16
18
16
18
25
25
27
26
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
22
22 22
22
22
22
22
22
22
22
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24

3
PARTS LIST
NO. Description Spec Qty. NO. Description Spec Qty.
1 Lower Connecting
Frame 1 15 Cushion ￠80*￠50*16 3
2 Fixed Frame 8 16 Round Inner Pipe
Plug ￠25 3
3 Right Shelf 1 17 Hex Bolt M12*30 12
4 Left Shelf 1 18 Hex Bolt M12*75 13
5 Middle Frame 2 19 Hex Bolt M8*20 16
6 Upper Connecting
Frame 1 20 Flat Washer ￠8.4*￠16*1.6 16
7 Ball Rack 4 21 Flat Washer ￠13*￠24*2.0 40
8 Counterweight
Hanging Rod 3 22 Big Flat Washer ￠13*￠37*2.0 10
9 Fixed Piece 82*45*3.0 3 23 Spring Washer ￠8.1*￠12.3*2.1 16
10 Rectangular Pipe
Plug 75*50*2.0 2 24 Lock Nut M12 25
11 Hollow Sleeve ￠60*t1.5*￠
50*152 4 25 Open-End
Wrench S16-S18 2
12 Barbell Support
Bar ￠100*￠50*200 3 26 Allen Wrench 5mm 1
13 Screw M8*8 3 27 Allen Wrench 4mm 1
14 Spring Clip ￠50 3

4
HARDWARE PACKAGE
Ordering Replacement Parts (U.S. and Canadian Customers only)
Please provide the following information in order for us to accurately identify the part(s)
needed:
The model number (found on cover of manual)
The product name (found on cover of manual)
The part number found on the “EXPLODED DIAGRAM” and “PARTS LIST” (found near
the front of the manual)
Please contact us at [e-mail] or 1-877-90SUNNY
(877-907-8669).
#18 M12*75 13PCS #17 M12*30 12PCS
#21 ￠13*￠24*2.0 40PCS #22 ￠13*￠37*2.0 10PCS
#24 M12 25PCS
#27 4mm 1PC
#26 5mm 1PC
#25 S16-S18 2PCS
16
18
#19 M8*20 16PCS #20 ￠8.4*￠16*1.6 16PCS #23 ￠8.1*￠12.3*2.1 16PCS

5
ASSEMBLY INSTRUCTIONS
We value your experience using Sunny Health and Fitness products. For assistance with
parts or troubleshooting, please contact us at [e-mail] or
1-877-90SUNNY (877-907-8669).
STEP 1:
Attach 8 Fixed Frame (No. 2) onto the
Lower Connecting Frame (No. 1),
using 16 Flat Washers (No. 20)
, 16
Spring Washers (No. 23), and 16 Hex
Bolts (No. 19). Tighten and secure with
Allen Wrench (No. 26).
STEP 2:
Attach the Left Shelf (No. 4) onto the
left side of the
Lower Connecting
Frame (No. 1), using 3Big Flat
Washers (No. 22),3 Hex Bolts (No.
18),3 Flat Washers (No. 21) and 3
Lock Nuts (No. 24). Secure with 2
Open-End Wrenches (No. 25)
. Do not
tighten the Hex Bolts (No. 18) during
this step.
Attach the Right Shelf (No. 3) onto the
right side of the
Lower Connecting
Frame (No. 1), using 3Big Flat
Washers (No. 22),3 Hex Bolts (No.
18),3 Flat Washers (No. 21) and 3
Lock Nuts (No. 24). Secure with 2
Open-End Wrenches (No. 25)
. Do not
tighten the Hex Bolts (No. 18) during
this step.
16
18
#25 S16-S18 2PCS
1
3
4
18 22
22
22
18
18
18
18
18
22
22
22
21 24
21
24
21 24
21
24
21
24
21
24
#18 M12*75 6PCS
#21 ￠ 13* ￠ 24*2.0 6PCS
#24 M12 6PCS
#22 ￠ 13* ￠ 37*2.0 6PCS
#19 M8*20 16PCS
#20 ￠8.4*￠16*1.6 16PCS
#23 ￠8.1*￠12.3*2.1 16PCS #26 5mm 1PC
1
2
2
2
2
2
2
2
2
23
20
19
19
23
20

6
#17 M12*30 12PCS
#21 ￠
13*
￠ 24*2.0 24PCS
17
21
17
21
17
21
17
21
17
21
17
21 17
21
17
21
17
21
17
21
17
21
17
21
21 24
24 21
24
21
24 21
24
21
24
21
24
21
21 24
21 24
21 24
21 24
21 24
3
4
5
5
6
#24 M12 12PCS
16
18
#25 S16-S18 2PCS
We value your experience using Sunny Health and Fitness products. For assistance with
parts or troubleshooting, please contact us at [e-mail] or
1-877-90SUNNY (877-907-8669).
STEP 3:
Attach the 2 connecting plates of the
Middle Frame (No. 5) onto the
connecting plates of the Left Shelf
(No. 4) and Right Shelf (No. 3), using
16 Flat Washers (No. 21), 8 Lock
Nuts (No. 24) and 8 Hex Bolts (No.
17). Secure with 2 Open-End Wrenches
(No. 25). Do not tighten the Hex Bolts
(No. 17) during this step.
Attach the connecting plates of the
Upper Connecting Frame (No. 6)
onto connecting plates of the Left
Shelf (No. 4) and Right Shelf (No. 3),
using 8 Flat Washers (No. 21) and 4
Lock Nuts (No. 24) 4 Hex Bolts (No.
17). Secure with 2 Open-End Wrenches
(No. 25).Then you can
tighten all the
Hex Bolts (No. 17) during this step.
Now you can tighten all the Hex Bolts
(No. 18) from STEP 2.

7
We value your experience using Sunny Health and Fitness products. For assistance with
parts or troubleshooting, please contact us at [e-mail] or
1-877-90SUNNY (877-907-8669).
STEP 4:
Attach the 4 Ball Racks (No. 7) onto the
Left Shelf (No. 4), using 4 Flat Washers
(No. 21), 4 Big Flat Washers (No. 22), 4
Lock Nuts (No. 24) and 4 Hex Bolts (No.
18). Tighten and secure with 2 Open-End
Wrenches (No. 25).
STEP 5:
Attach the 3 Counterweight Hanging
Rod (No. 8) and 3Fixed Pieces (No. 9)
onto the Right Shelf (No. 3), using 6
Flat Washers (No. 21), 3 Lock Nuts
(No. 24),and 3 Hex Bolts (No. 18).
Tighten and secure with 2 Open-End
Wrenches (No. 25).
16
18
#25 S16-S18 2PCS
#18 M12*75 4PCS
#21 ￠ 13* ￠ 24*2.0 4PCS
#24 M12 4PCS
#22
￠
13* ￠
37*2.0 4PCS
2124
24
24
24
7
7
7
7
18
22
18
22
18
22
21
21
21 3
18
22
#21 ￠13*￠24*2.0 6PCS
#24 M12 3PCS
16
18
#25 S16-S18 2PCS
4
#18 M12*75 3PCS
8
8
8
9
9
9
18
21
18
21
18
21
21
24
21
24
21
24

8
We value your experience using Sunny Health and Fitness products. For assistance with
parts or troubleshooting, please contact us at [e-mail] or
1-877-90SUNNY (877-907-8669).
#27 4mm 1PC
#13 M8*8 3PCS
8
8
12
12
12
13
13
13
14
14
14
15
15
15
8
STEP 6:
Attach the 3 Cushions (No. 15) and 3
Barbell Support Bars (No. 12) onto 3
Counterweight Hanging Rods (No.
8), using 3 Screws (No. 13) to fix and
lock 3 Barbell Support Bars (No. 12),
then install 3 Spring Clips (No. 14)
into 3Barbell Support Bars (No. 12).

9
MAINTENANCE INSTRUCTIONS
DAILY MAINTENANCE
Inspect and tighten all parts regularly. (Nuts, Bolts, Rubber Pads, Steel Brackets, etc.)
Replace any worn or torn parts immediately.
Check and ensure the equipment is leveled at all time.
Check and tighten all adjustment pins/knobs regularly.
WEEKLY MAINTENANCE
Use damp cloth on plastic parts only, use dry cloth on metal frames.
Inspect the metal frame structure of the equipment.
Version 1.1