Sunnydaze Decor IJF-532 User manual

PLEASE CHARGE
FOR 8+ HOURS
BEFORE FIRST USE
JW-216
LED SOLAR
PATHWAY LIGHTS
IJF-532
Read this manual carefully and follow the care instructions.
Save this document for future reference.
Page 1 / 2
Clean the solar panel
frequently
Do NOT place the solar
panel in shaded areas
Do NOT charge the solar
panel behind glass
CHOOSING THE RIGHT LOCATION
• Select an outdoor location where the solar panel will receive at least 6-8 hours of full, direct sunlight each
day. Ensure the solar panel does not become shaded by trees, shrubs or buildings throughout the day as
this will influence the charge of the battery and shorten the working time at night.
• Avoid locations with nighttime light sources nearby, such as street or porch lights. When the light detecting
sensor receives too much ambient light, the lights will not illuminate.
OPERATION
Switch the power to the 'ON' position and place the lights in a sunny location.
First Time Use: The lights will require at least 8 hours of full, direct sunlight to fully charge the battery. Make
sure the unit is turned 'ON' while charging.
As long as the battery has a su󰀩cient charge, the lights will automatically illuminate when it gets dark.
HOW SOLAR LIGHTS WORK
During the day, the solar panel converts solar energy into electricity and stores it in the rechargeable battery.
At night, the light turns on automatically via a light detecting sensor built into the unit. How long the light
illuminates will depend upon the location of the light, weather conditions, and how much direct sunlight the
solar panel is exposed to. Ensure the power is switched to 'ON' while charging.
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
11/2020

Page 2 / 2
USE & CARE
• For outdoor use only.
• Keep away from children ─this is not a toy!
• Keep the solar panel clean by gently wiping it with a soft, damp cloth. Clean solar panels will absorb more sunlight.
• Never use chemicals or abrasive materials to clean the lights or solar panel.
• Store in a dry, warm, indoor location during inclement weather and freezing temperatures.
• Do not allow the unit to freeze. Freezing temperatures will damage the internal components.
• Turn the units off before storing.
• If installed in a grassy location, remove the disks and stakes from the ground before mowing or cutting the grass.
This product uses a rechargeable battery. When the battery can no longer be used, it should be removed from the unit and recycled.
The battery must not be incinerated or composted. Recycle the battery in accordance with local laws and regulations.
TROUBLESHOOTING
• Ensure the power button is turned to the 'ON' position.
• This product is designed to only illuminate at night. Make sure the light sensor is not receiving too much ambient light.
• If the light only works for a short time, attempt a 'Boost Charge':
- Turn the power 'ON' and place in a location where the solar panel receives direct sunlight for at least 8 hours.
- Turn the power 'OFF' at night to conserve the battery.
- Repeat this process for 2-3 days.
IMPORTANT INFORMATION
Any modication to the product or failure to follow recommended care will void the product warranty.
11/2020JW-216
ASSEMBLY
A
B
Identify the di󰀨erent style
stake pieces.
Ahas a short notch on the
thicker end of the stake.
Bhas a long notch in the
tapered end the stake.
Push stake A all the way
onto stake B until the ends
are aligned with each other.
Insert the assembled
stake onto the bottom of
the disk light. Push the
stake in until secure.
Press the button on the bottom of the disk to turn
the light on. Place in a location that recieveds
full, direct sunlight for at least 6-8 hours per day.
STEP 1 STEP 2
STEP 3